• Journal of the Korean institute of surface engineering
• /
• v.56 no.2
• /
• pp.115-124
• /
• 2023

Anodization is an electrochemical process that electrochemically converts a metal surface into an oxide layer, resulting in enhanced corrosion resistance, wear resistance, and improved aesthetic appearance. Local anodization, also known as selective anodization, is a modified process that enables specific regions or patterns on the metal surface to undergo anodization instead of the entire surface. Several methods have been attempted to produce oxide layers via localized anodic oxidation, such as using a mask or pre-patterned substrate. However, these methods are often intricate, time-consuming, and costly. Conversely, the direct writing or patterning approach is a more straightforward and efficient way to fabricate the oxide layers. This review paper intends to enhance our comprehension of local anodization and its potential applications in various fields, including the development of nanotechnologies. The application of anodization is promising in surface engineering, where the anodic oxide layer serves as a protective coating for metals or modifies the surface properties of materials. Furthermore, anodic oxidation can create micro- and nano-scale patterns on metal surfaces. Overall, the development of efficient and cost-effective anodic oxidation methods is essential for the advancement of various industries and technologies.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.47.2-47.2
• /
• 2021

Focusing on both small separations and baryonic acoustic oscillation scales, the cosmic evolution of the clustering properties of peak, void, wall, and filament-type critical points is measured using two-point correlation functions in ΛCDM dark matter simulations as a function of their relative rarity. A qualitative comparison to the corresponding theory for Gaussian random fields allows us to understand the following observed features: (i) the appearance of an exclusion zone at small separation, whose size depends both on rarity and signature (i.e. the number of negative eigenvalues) of the critical points involved; (ii) the amplification of the baryonic acoustic oscillation bump with rarity and its reversal for cross-correlations involving negatively biased critical points; (iii) the orientation-dependent small-separation divergence of the cross-correlations of peaks and filaments (respectively voids and walls) that reflects the relative loci of such points in the filament's (respectively wall's) eigenframe. The (cross-) correlations involving the most non-linear critical points (peaks, voids) display significant variation with redshift, while those involving less non-linear critical points seem mostly insensitive to redshift evolution, which should prove advantageous to model. The ratios of distances to the maxima of the peak-to-wall and peak-to-void over that of the peak-to-filament cross-correlation are ~2-√~2 and ~3-√~3WJ, respectively, which could be interpreted as the cosmic crystal being on average close to a cubic lattice. The insensitivity to redshift evolution suggests that the absolute and relative clustering of critical points could become a topologically robust alternative to standard clustering techniques when analysing upcoming surveys such as Euclid or Large Synoptic Survey Telescope (LSST).

• The Journal of Korean Medical History
• /
• v.35 no.2
• /
• pp.19-34
• /
• 2022

Objectives : The purpose of this study was to compare the prescriptions used for insomnia in Uihagimmun and Donguibogam. Methods : In Uihagimmun, 17 prescriptions were selected. If there was a change in the medicinal material, the altered herbal medicine was indicated along with the prescription name. In Donguibogam, 14 prescriptions were selected. Each prescription was analyzed by dividing it into prescription composition, and herbal medicine. Medications constituting a prescription were classified according to the classification of Korean herbal medicines and arranged based on their frequency of appearance. Result : The causes of insomnia were classified mainly as exhaustion in Uihagimmun and as exhaustion, stress, low energy, aging and discomfort in Donguibogam. In Uihagimmun, numerous medicines were used to relieve fever, and in Donguibogam, the use of stabilizers increased. More warm medicines were used in Donguibogam than in Uihagimmun, and the taste trend was similar in each. Conclusions : The types of causes of insomnia increased more in Donguibogam than Uihagimmun. Accordingly, the two books showed differences in drug classification and properties of a medicine. However, in terms of taste and action of medicinal herbs, they showed similar patterns, and there was only a difference in the order of frequency.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1025-1031
• /
• 2023

In order to examine the pre-industrial application product quality characteristics of yanggang (a type of traditional Korean confectionery) with varying levels of Palatinose, this study conducted multiple preliminary experiments. By applying different amounts of Palatinose (1%, 2%, 3%, 4%) and adhering to a recipe suitable for commercial products, the yanggang was produced under controlled manufacturing conditions. While the moisture content of the manufactured yanggang adhered to the established manufacturing standard, showing minimal variations, there were statistically significant differences observed with an increase in the Palatinose proportion, exhibiting a trend akin to findings from other yanggang studies. Similarly, there were slight but statistically significant differences observed in soluble solids content and pH, though these differences were not found to have a significant impact. The addition of Palatinose did not induce changes in the elasticity (springiness) and firmness (gumminess) of the yanggang, nor in its chewiness, as the Palatinose content increased. Despite a reduction in calorie content, the addition of Palatinose did not influence the appearance and taste of the yanggang.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.106-114
• /
• 2006

Uses of geosynthetics as a reinforcing material for earth structures have ever increased due to their excellent economy. fine external appearance. and easy construction. In the current practice of geosynthetics. however, the lacks of the standardized method of evaluating the soil/geosynthetics friction properties and the inconsistency of conventional design methods develop confusion to the civil engineers. The purpose of site monitoring of the retaining wall reinforced by geogrids was to evaluate the applicability of existing design methods to, and performance of. CHAMSTONE wall system. Full scale field performance during and after construction was monitored by incorporating instrumentation including strain gauges on the geogrid and soil pressure cells. The difference of the reinforcing effects of geosynthetics embedded in the soil will be also investigated by comparing of the line and curve types of retaining wall reinforced by geogrids with block type facings.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1685-1688
• /
• 2004

This study mechanically measured physical properties of jelly made by adding kappa carrageenan and agar-agar to the sipjeondaebo extract, varying the addition ratio. The sipjeondaebo extract used in the study showed 4.95 pH, 7.0 Brix$^{\circ}$, and high turbidity of more than 3.0 NTU. The sugar content was fixed at 25.2 Brix$^{\circ}$ when isomaltooligosaccharide was added in a 25-percent concentration. When the jelly was mechanically measured after it became hard in the refrigerator, the measurement results did not show any significant difference in cohesiveness between different addition ratios of agar-agar to kappa carrageenan. In the measurement of chewiness and gumminess, the jelly show a significantly decreasing tendency in both the two properties as the increase in the addition rate of agar-agar was made. Hardness was also measured lower as the more addition of agar-agar was made, and its the highest level was shown when there was the addition of kappa carrageenan only. Springiness was the highest when the ratio of kappa carrageenan to agar-agar was 0.7%:0.3%, while it was measured the lowest when agar-agar was added in a 1.0% concentration. In the measurement of the jelly's physical properties, the results showed the highest level of appearance when the ratio of kappa carrageenan to agar-agar was 0.7% but indicated that there was no significant difference in flavor. The overall Quality was evaluated to maintain the highest level at the kappa carrageenan to agar-agar ratio of 0.7%:0.3%, followed by a 0.5%:0.5% addition ratio.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.72-75
• /
• 2008

Quality properties of red ginseng prepared with different cultivation years of fresh ginseng produced in Punggi region were investigated. Fresh ginseng cultivated for 4, 5, or 6 years was steamed for 3.5 hr and dried for 24 hr at $60{\sim}65^{\circ}C$ and subsequently for $3{\sim}4$ days at $40^{\circ}C$ under commercial conditions. Compared to 6 years-old roots, the five years-old roots showed similar or some lower quality properties in terms of color, appearance, diameter, and inside quality, but higher ones in length and yield of prepared red ginseng. In particular, the levels of ginsenoside $Rg_3$ and $Rh_2$, which are known as specific components in red ginseng, were the highest in 5 years-old roots. The result shows that fresh ginseng of 5 years-old roots produced in Punggi region can be utilized as a raw material for the manufacture of high-quality red ginseng.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.101-106
• /
• 2005

This study was carried rut to investigate the quality properties of two cocked germinated-brown rices(A- and B-product). Color value of A- and B-product were L=68.46, a=0.92, b=9.49 and L=69.32, a=-1.10, b=9.77, respectively. Moisture content of those was $64.5\%$. The free sugar contents of A-product were $0.2\%$ glucose, $0.15\%$ sucrose, $0.18\%$ maltose, and those of B-product were $0.14\%$ glurose, $0.50\%$ sucrose, $0.17\%$ maltose, respectively. Vitamin E content in A-product was $30.7\;{\mu}g\;100\;g$ and $46.9\;{\mu}g\;100\;g$ in B-product. Total dietary fiber contents were $2.8\%$, and $2.2\%$, respectively. The DSC(differential scanning calorimetry) characteristics of two cooked germinated-brown rices showed similar pattern. Onset temperature and gelatinization enthalpy of peak 1 were $56.5^{\circ}C$, 5.46 J/g in A-product and $56.2^{\circ}C$, 5.56 J/g in B-product, respectively. Onset temperature and melting enthalpy of peak 2 were $109.5^{\circ}C$, 0.33 J/g in A-product and $108.9^{\circ}C$, 0.37 J/g in B-product, respective1y. Sensory properties of cocked germinated-brown rices were affected by appearance, taste and texture. Palatability score of B-product was higher than that of A-product.

• Korean journal of food and cookery science
• /
• v.16 no.1
• /
• pp.65-74
• /
• 2000

The properties of Puchu(Allium odorum L.)kimchi prepared with different methods were investigated by measuring organoleptic and microbiological properties up to 43 days at 10$\^{C}$ right after preparation. Five conditions of making Puchukimchi included: the addition of salt (treatment A), soybean sauce (treatment B), soybean sauce and perilla seed powder (treatment C), anchovy sauce (treatment D), anchovy sauce and glutinous rice paste(treatment E). Sensory evaluation showed high scores in the appearance, smell, sour taste, good taste, savory taste, texture, and overall acceptability of Puchukimchi prepared with soybean sauce(treatment B). However, treatment C had the best score in good taste. In the intial stage of fermentation, treatment C had higher total microbial counts than others, but in the final stage, treatment E had higher counts than others. Treatment A had less total microbial counts than others throughout the fermentation. The maximum numbers of lactic acid bacteria in other treatments were in the order of treatments A>B>D. In the final stage of fermentation, treatment B had the least number of lactic acid bacteria composed of Pediococcus, Streptococcus, Leuconostoc and Lactobacillus. Streptococcus reached the maximum level at the 8 th day of fermentation, and the number of Lactobacillus was increased with the lapse of fermentation time. It was shown that fermentation patterns of Puchukimchi were influenced by the preparation methods used.

• Culinary science and hospitality research
• /
• v.18 no.5
• /
• pp.205-219
• /
• 2012

The purpose of this study is to make a correlation analysis between mechanical characteristics and sensory characteristics of puffer fish fillet under storage conditions and to find out those quality characteristics. With the storage time, VBN increased while color, smell and texture values decreased. As the appearance, the fish showed excellent quality stored at $4^{\circ}C$ for 8-12 hours, at $12^{\circ}C$ for 4-8 hours and at $20^{\circ}C$ for 4 hours. When the L value increased, color preference in sensory results decreased in correlation physicochemical properties, mechanical properties and sensory properties of puffer fish fillet. However, mechanical properties and sensory evaluation showed a different aspect. When the higher temperature, redness(a-value) decreased. Regardless of storage temperature, yellowness (b-value) increased. In the results of the hardness, the value was higher, the sensory showed the better texture.