• 제목/요약/키워드: antenna measurement

검색결과 746건 처리시간 0.032초

안테나를 이용한 몰드변압기 절연결함 측정기법 연구 (Measurement and Analysis of Insulation Detects of Cast-resin Transformers using Antenna)

  • 최명일;김재진;한가람;전정채;이현옥
    • 전기학회논문지
    • /
    • 제65권11호
    • /
    • pp.1937-1942
    • /
    • 2016
  • Unlike oil immersed transformers, cast-resin transformers have the solid insulator 'epoxy resin' in sealed structure. Therefore, they reveal a lot of limitations in checking aging conditions and predicting an accident. This study analyzed the characteristics of Cast-resin transformers by the measurement distance and measurement sensitivity with a corona defect sample, using antenna sensor. Therefore, the experiment has proven that the antenna sensor-based measurement method proposed in this study is able to detect the insulation defect location of the cast-resin transformer, unlike conventional measurement methods. It is expected that the result of this study will be used to develop a new type of measuring method in order to measure insulation defects and to use in safety inspection of domestic cast-resin transformers.

회전익 항공기의 통신·항법 안테나 최적 위치설계를 통한 체계성능 측정방법 연구 (The Study on Optimal Placement and Systematic Performance Measurement Method for Communication/Navigation Antenna of Rotary Wing )

  • 노상완;진상윤;김민수;강호원;안승범
    • 항공우주시스템공학회지
    • /
    • 제17권4호
    • /
    • pp.110-117
    • /
    • 2023
  • 본 논문에서는 회전익 항공기 통신·항법 안테나의 최적 위치와 체계 성능측정 방법에 대해 연구하였다. 통신·항법 안테나의 항공기 최적 장착 위치 선정을 위해 기체 형상 및 특성을 고려한 후 항공기 장착 안테나에 대한 복사패턴, 커플링 분석, 장비 운용 프로파일 및 안테나 종류별 분석을 수행하고, 분석결과에 따라 항공기에 장착된 안테나에 대한 지상시험 및 비행시험을 통해 VSWR 측정, 안테나 패턴시험을 순차적으로 수행하는 절차를 정립하였다. 본 논문에서 제안한 체계적인 성능 측정 방법 및 절차는 LAH(소형무장헬기)체계의 지상 및 비행시험을 통해 입증하였다.

Measurement of the ICRH antenna phasing using antenna strap probe based diagnostic system in EAST tokamak

  • Liu, L.N.;Liang, Q.C.;Yang, H.;Zhang, X.J.;Yuan, S.;Mao, Y.Z.;Zhang, W.;Zhu, G.H.;Wang, L.;Qin, C.M.;Zhao, Y.P.;Cheng, Y.;Zhang, K.
    • Nuclear Engineering and Technology
    • /
    • 제54권10호
    • /
    • pp.3614-3619
    • /
    • 2022
  • To operate the ion cyclotron resonance heating (ICRH) antennas in a better heating state and produce relatively low impurities, it is necessary to control the antenna spectrum by changing the antenna phasing. As the electrical length of the antenna feeding transmission lines is changing as a matter of the standing wave pattern at the ceramic supports, 90° elbows, T-connectors and antenna loops, we chose to measure the current at the grounding points of the antenna loops by antenna strap probe. The voltage drops along a small, several millimeter-long paths at the end of the antenna loops give a signal that is proportional to the current in the antenna loop. Through the simulation of the antenna strap probe and the actual measurement of the antenna phasing under vacuum conditions, the reliability of the antenna strap probe based diagnostic system have been successfully proved. Moreover, this system was successfully applied to the ICRH daily experiments in the spring of 2021. In the near future, the active real-time feedback control of the antenna phasing system will be developed based on this diagnostic system in the EAST tokamak.

뇌격거리측정계 및 뇌방전에 의해 발생하는 전장의 스펙트럼 분석 (Measurement System of a Distance from Lightning Strokes to Observatory and Spectrum Analysis of Electric Fields Radiated from Lightning Discharges)

  • 이복희;장석훈;정광희;전덕규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1656-1658
    • /
    • 1998
  • This paper deals with a measurement system of a distance between lightning strokes and observatory station and spectrum analysis of electric fields radiated from lightning discharges. The distance measurement system, which consists of a loop type magnetic field sensor, a microphone and one chip microprocessor, is connected to a personal computer through RS232 port to acquire and process the data. This system is to use a difference of propagation velocity between an electromagnetic wave and a sonic wave produced by lightning discharge. Also, an electric field waveform and a frequency spectrum were investigated by an electric field measurement system with a hemisphere antenna and a spectrum analyzer with a biconical antenna and a log-periodic antenna, respectively. The results would be used as a basic reference to protect the power systems and electric circuits from lightning overvoltages.

  • PDF

2/Q 대역폭 한계치를 넘는 소형 안테나 설계 (Electrically Small Antenna with Bandwidth over 2/Q Limit)

  • 이철희;추호성;박익모
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.255-258
    • /
    • 2005
  • In this paper, we verify that the bandwidth of the optimized disk-loaded monopole antenna with electromagnetically coupled feed obtained using a genetic algorithm is broader than the theoretical bandwidth limit of 2/Q by simulation as well as by measurement. The measured bandwidth of the optimized antenna (kr : 0.599) is about 42% from 380 MHz to 580 MHz (VSWR<5.8). The efficiency measurement of the antenna is over 90% for the frequency band of operation.

  • PDF

Analysis of 60 GHz Band Indor Wireless Channels with Channel Configurations

  • Ji-Hoon Park;Yun
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.30-33
    • /
    • 1998
  • In this paper, 60 GHz indoor broadband wireless channels are measured with various configurations in a typical coffice environment. Mesurements are taken at nine positions of the room and the base-station antenna is placed either at the center or at an edge of the measurement room, and the remote-station antenna is either sharp beam or broad beam type. The rms delay spread(RDS) and normalized received power (NRP) are estimated from the measurements. Bit error rate simulations are performed using impulse responses for two measurement positions with QPSK/DQPSK OFDM modulation. Using sharp beam antenna results in superior performances than using broad beam antenna in terms of both bit error rates (BER) and NRP penalty. Also, placing the bese-station antenna at the center is superior to placing it at an edge in terms of BER and NRP.

  • PDF

LS Band용 원형 루프 배열 안테나의 제작 및 측정 (Development of Circular Loop Array Antenna for LS Band Operation)

  • 전중창;김태수
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
    • /
    • pp.290-292
    • /
    • 2002
  • In this paper, we present a simple design method and measurement results for circular loop antenna arrays, which can be used for LS band operation, such as access point antennas in the wireless LAN system. It has been shown that the input impedance of a circular loop can be adjusted near 100 $\Omega$ using a short stub. The length of the stub can be immediately determined in the work place through the measurement of S11 with a network analyzer. Fabricated arrays show high antenna gains as much as 12.4㏈i and 15.1 ㏈i at the center frequency of 2.45 ㎓ for 4${\times}$l and 4${\times}$2 array, respectively. These types of loop arrays can be fabricated at a low cost.

  • PDF

RTA용 반강체 동축케이블 안테나 (Semi-rigid Coaxial Cable Antenna for RTA)

  • 강철준;박성교;문장원;박종백
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 I
    • /
    • pp.262-265
    • /
    • 2003
  • Radiofrequency thermal ablation (RTA) as one of the microwave hyperthermia is becoming the treatment of choice for small but inoperable tumors of the liver. In this paper, we designed the applicator composed of semi-rigid coaxial cable antenna with a ring slot for RTA. To optimize the maximum output of radiation at 2450 MHz, we simulated the antenna using Electromagnetic simulation tools Maxwell program and analyzed the return loss and the electric field $E_{tot}$ at the near-field region between the simulation results and measurement results. As a result, we obtained the return loss of -29.786 dB at 2450 MHz when the antenna was placed between two blocks of a pig's liver, and the measurement results agreed with the simulation results well. Therefore, this semi-rigid coaxial cable antenna with a ring slot can be used very usefully as the applicator for RTA.r RTA.A.

  • PDF

지하철 곡선 터널에서의 NLOS 전파 특성 (NLOS Propagation Characteristics in a Curved Subway Tunnel)

  • 정회동;윤찬의;강영진;송문규
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 I
    • /
    • pp.322-325
    • /
    • 2003
  • In this paper, path loss characteristics in a curved subway tunnel are measured and analyzed. The measurement is carried out in the frequency bands of 2.45GHz and 5.8GHz. A directional antenna is employed for transmission and an omnidirectional antenna for reception. This measurement is performed in the subway tunnel in the vicinity of the Daejon station. The tunnel is curved and its cross section is arch-shaped. The path loss is measured with the location of the transmitter antenna fixed and the receiver antenna moving in the tunnel. The measured path loss ratio is about 0.1dBm/m. Also, the signal received from the antenna located on the outer side of curve in the tunnel experiences weaker path loss.

  • PDF

COMS SOC 13M ANTENNA G/T MEASUREMENT

  • Park, Durk-Jong;Yang, Hyung-Mo;Ahn, Sang-Il
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.489-492
    • /
    • 2007
  • At COMS SOC, 13m antenna system will serve to transmit command and receive telemetry in S-Band for COMS operation. In addition, Sensor Data and LRIT/HRIT in L-Band will be received and LRIT/HRIT in S-Band will be transmitted through this antenna system. In many cases, G/T is used as barometer to estimate the receiving capability of antenna system. To estimate G/T, this paper presents two approaches, one is analysis based on the specification of antenna and RF equipment while the other is measurement by using Sun. From the results, G/T was proven as more than 20dB/K and it means that the required G/T, 19dB/K is verified successfully.

  • PDF