• Journal of Surface Science and Engineering
• /
• v.48 no.1
• /
• pp.27-32
• /
• 2015

Advanced high strength steels undergo recrystallization annealing in reducing gas atmosphere before galvanizing to improve mechanical properties. The selective oxidations of elements such as Mn, Si, Cr and Al during annealing decrease wettability of liquid zinc, resulting in bare spots and other defects. In this work, Fe-3wt%Mn steel sheet was annealed at $780^{\circ}C$ for 1200 sec. in 5% $H_2-N_2$ atmosphere and then dipped into zinc bath held at $460^{\circ}C$, which contained 0.2wt% dissolved Al. MnO crystallines in the average size of 200 nm were formed on the surface after annealing. It is estimated that MnO has been detached into bath with the formation and growth of inhibition layer with longer immersion time during galvanizing. No evidence of aluminothermic reduction of MnO has been found in this study.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.87-92
• /
• 2002

Placement is an important step in the physical design of VLSI circuits. It is the problem of placing a set of circuit modules on a chip to optimize the circuit performance. The most popular algorithms for placement include the cluster growth, simulated annealing and integer linear programming. In this paper we propose a stochastic evolution algorithm searching solution space for the placement problem, and then compare it with simulated annealing by analyzing the results of each implementation.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1424-1425
• /
• 2006

A four-step rapid thermal annealing (RTA) process is proposed in order to improve the throughput and stabilize the process, compared to the six-step RTA process. Effects of annealing on the properties of a structure mode of CMOS process in both cases were investigated. The implanted dopant(As, $BF_2$ and Ti/TiN) movement in silicon during different rapid thermal annealing conditions was studied using secondary ion mass spectroscopy (SIMS) technique. These results show that the four-step RTA process significantly improves time effect and throughput (15%) by the condition of ramping up compared to the six-step RTA process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.708-712
• /
• 2004

Shallow $p^+-n$ junctions were formed by ion implantation and dual-step annealing processes. The dopant implantation was performed into the crystalline substrates using BF$_2$ ions. The annealing was performed with a rapid thermal processor and a furnace. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of junction depth and sheet resistance. A new simulator is designed to model boron diffusion in silicon. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. Using initial conditions and boundary conditions, coupled diffusion equations are solved successfully. The simulator reproduced experimental data successfully.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1829-1831
• /
• 2005

Ferroelectric $Bi_{3.25}Nd_{0.75}Ti_3O_{12}$(BNdT) thin films were proposed for capacitor of FeRAM. The BNdT thin films were grown on Pt/Ti $SiO_2/P-Si(100)$ substrates by the RF magnetron sputtering deposition. The dielectric properties of the BNdT were investigated by varying post-annealing temperatures. Increasing post-annealing temperature, the (117) peak was increased. An increase of rod type grains of BNdT films with increasing post-annealing temperature was observed by the Field Emission Scanning Electron Microscopy(FE-SEM). The dielectric constant and dielectric loss of the BNdT thin films with post-annealing temperature of $700^{\circ}C$ were 418 and 0.37, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.598-601
• /
• 2015

The $Sr_{0.7}Bi_{2.3}Nb_2O_9(SBN)$ thin films are deposited on Pt electrode($Pt/Ti/SiO_2/Si$) using RF sputtering method at various deposition temperature. The deposition temperature of optimum was $300^{\circ}C$. SBN thin films were annealed at $500{\sim}700^{\circ}C$ using furnace and RTA, respectively. The surface roughness showed about 2.42 nm in annealing temperature($600^{\circ}C$) of furnace. The capacitance density of SBN thin films were increased with the increase of annealing temperature. The maximum capacitance density of $0.7{\mu}F/cm^2$ was obtained by annealing temperature($700^{\circ}C$). The frequency dependence of dielectric loss showed about 0.03 in frequency ranges of 1~1,000 kHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.116-116
• /
• 2007

We investigated the characteristics of the Hafnium silicate (Hf-silicate) film which is grown by ALD (atomic layer deposition). The Hf-silicate films that were annealed by the RTP. The physical and electrical properties of nitrided Hf-silicate films, incorporated by NO gas and $NH_3$ gas annealing, were investigated by XPS, TEM and I-V measurement. We confirmed the nitrogen incorporation during NO gas annealing treatment effectively enhances the thermal stability of Hf-silicate. The tendency of nitnitridation in NO gas and $NH_3$ is different. Leakage current is improved in post NO gas annealing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.117-117
• /
• 2007

The physical and electrical properties of nitrided Hf-silicate films, incorporated by NO gas annealing, were investigated by XPS, NEXAFS, TEM and C-V measurement. We confirmed the nitrogen incorporation during NO gas annealing treatment effectively enhances the thermal stability of Hf-silicate. The suppression of phase separation was observed in Hf-silicate films with high nitrogen contents. The negative shift of threshold voltage is caused by the incorporation of nitrogen in the hafnium silicate films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.861-864
• /
• 2000

Ferroelectric thin film capacitors with high dielectric constant are important for the application of memory devices. In this work, thin films of PLT(28)(Pb$\sub$0.72/La$\sub$0.28/Ti$\sub$0.93/O$_3$) were fabricated on Pt/Ti/SiO$_2$/Si substrates in-situ annealing and ex-situ annealing have been compared depending on the annealing time. We have systematically investigated the variation of grain sizes depending on the condition of post-annealing and the variation of deposition rate. C-V measurement, ferroelectric properties, leakage current and SEM were performed to investigate the electrical properties and the microstructural properties of Pb(La,Ti)O$_3$.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.1
• /
• pp.42-45
• /
• 2002

Properties of lead zirconate titanate ferroelectric thin films prepared by rapid thermal annealing/direct insertion thermal annealing were investigated. The remnant polarization (Pr), saturation polarization (Ps), and coercive force (Ec) of typical samples annealed by rapid thermal annealing (RTA) are about 13.7 $\mu$ C/cm$^2$, 27.1 $\mu$C/cm$^2$, and 55.6 kV/cm, respectively. The dielectric constant of the sample is about 786, the dielectric loss tangent is about 2.4% at 1 kHz. Furthermore, ferroelectric, conduction, and piezoelectric properties of the thin films annealed by RTA process and the direct insertion thermal annealing (DITA) process were compared. The influence of temperature in the dry process on the above properties was also investigated.