• Korean Journal of Acupuncture
• /
• v.24 no.4
• /
• pp.85-98
• /
• 2007

Objectives : Standardization and clear description of locating acupuncture points guarantees reproducibility and credibility of the results in animal studies of acupuncture points and meridians. In this study, we aimed at analyzing the acupoint description of the previous experimental studies and suggesting guidelines for related journals. Methods : We searched animal studies where acupuncture points were used in Journal of Korean Acupuncture & Moxibustion Society and Journal of Meridian & Acupoint with a limitation of period, from 2002 to 2006. Data on experimental animals, acupuncture points and their descriptions were extracted and put in a predefined form. They were classified as one of the 4 classes; A) descriptions of the acupuncture points present, B) no description of the acupuncture points and only reference provided, C) neither description of the acupuncture points nor reference provided, or D) acupuncture point detector used. Two authors independently extracted and classified the data and the disagreements were resolved by discussion. Experts were invited to rate acupuncture point description validity on a numeric rating scale in the 11-item questionnaire. Results : Two hundred and five studies were identified and classified as follows; A) 32.2% (n=66), B) 7.8% (n=16), C) 51.2% (n=105), and D) 8.8% (n=18). Experts ratings were significantly lower for class C (mean${\pm}$SD, 2.14${\pm}$1.35, 95% CI [1.90, 2.39], P = 0.004 compared with class B, P ${\leq}$ 0.001 compared with class A or C) and no difference was found between classes A, B, and D. Conclusions : Reporting of acupuncture points in experimental animals is poor and validity and reliability of the result from such reporting is hampered. We suggest that journal editors and experts provide guidelines for reporting animal acupuncture points and adopt them into guide for authors for related journals.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.368-374
• /
• 2020

BACKGROUND: The residual analysis of polar pesticides has remained a challenge. It is even more difficult to simultaneously analyze multiple polar pesticides. Diquat, paraquat, and chlormequat are typical examples of highly polar pesticides. The existing methods for the analysis of diquat, paraquat and chlormequat are complex and time consuming. Therefore, a simple, quick and effective method was developed in the represent study for simultaneous analysis of diquat, paraquat and chlormequat in animal products, meat and fat using UPLC-MS/MS. METHODS AND RESULTS: Sample extraction was carried out using acidified acetonitrile and water and re- extracted with acidified acetonitrile and combine the extracts followed by centrifugation. The extract was then cleaned up with a HLB cartridge after reconstitution with acidic acetonitrile and water. The method was validated in quintuplicate at three different concentrations. The limits of detection (LOD) and quantification (LOQ) were 0.0015 and 0.005 mg/L, respectively. Matrix suppression effect was observed for all of the analytes. A seven point matrix matched calibration curve was constructed for each of the compound resulted excellent linearity with determination coefficients (R2) ≥ 0.991. Accuracy and precision of the method was calculated from the recovery and repeatability and ranged from 62.4 to 119.7% with relative standard deviation less than 18.8%. CONCLUSION: The recovery and repeatability of the developed method were in the acceptable range according to the Codex Alimentarius guideline. The developed method can be applied for the routine monitoring of diquat, paraquat, and chlormequat in animal products, meat and fat.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.107-116
• /
• 2021

In this study, an analytical method was developed for estradiol-17��, testosterone, and progesterone, which are growth promoters as veterinary drug residues in animal food. The analytes were separated using liquid chromatography, and was injected into a mass spectrometer through the electrospray ionization(ESI) process and detected in multiple reaction monitoring(MRM) mode. As the method was validated by CODEX CAC/GL 71-2009 guideline, it met the acceptable. The analysis of beef, pork, and chicken distributed in Korea was conducted with an established method to confirm the applicability of the actual sample. It was confirmed that the developed method can be quickly and reliably in the analysis for the growth promoters identified in domestic distributed livestock products. Through subsequent research, a highly utilized analysis method will be completed if the number of growth promoters is expanded based on the method and the simultaneous analytical method is established by including all of it.

• Journal of Food Hygiene and Safety
• /
• v.27 no.1
• /
• pp.103-107
• /
• 2012

We compared between an automated most-probable-number technique $TEMPO^{(R)}$TVC and traditional plating methods $Petrifilm^{TM}$ for estimating populations of total aerobic bacteria in various livestock products. 257 samples randomly selected in local retail stores and 87 samples inoculated with $E.$ $coli$ ATCC 25922, $Staphylococcus$ $aureus$ ATCC 12868 were tested in this study. The degree of agreement was estimated according to the CCFRA (Campden and Chorleywood Food Research Association Group) Guideline 29 and the agreement indicates the difference of two kinds methods is lower than 1 log base 10($log_{10}$). The samples of hams, jerky products, ground meat products, milks, ice creams, infant formulas, and egg heat formed products were showed above 95% in the agreement of methods. In contrast, proportion of agreement on meat extract products, cheeses and sausages were 93.1%, 92.1%, 89.1%, respectively. One press ham and five sausages containing spice and seasoning, two pork cutlets containing spice and bread crumbs, two meat extract product and two natural cheeses and one processing cheese with a high fat content, and one ice cream containing chocolate of all samples showed the discrepancy. Our result suggest that $TEMPO^{(R)}$TVC system is efficient to analyses total aerobic bacteria to compare manual method in time-consuming and laborious process except livestock products having limit of detection.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1510-1510
• /
• 2001

NIRS uses reflectance signals resulting from bending and stretching vibrations in chemical bonds between carbon, nitrogen, hydrogen, sulfur and oxygen. These reflectance signals are used to measure the concentration of major chemical composition and other descriptors of homogenized and freeze-dried whole broiler carcasses. Six strains of chicken were analyzed and the NIRS model predictions compared to reference data. The results of this comparison indicate that NIRS is a rapid tool for predicting dry matter (DM), fat, crude protein (CP) and ash content in the broiler carcass. Males and females of six commercial strain crosses of broiler chicken (Gallus domesticus) were used in this study (6$\times$2 factorial design). Each strain was grown to 16 weeks of age, and duplicate serial samples were taken for body composition analysis. Each whole carcass was pressure-cooked, homogenized, and a representative sample was freeze-dried. Body composition determined as follows: DM by oven dried method at 105$^{\circ}C$ for 3 hours, fat by Mojonnier diethyl ether extraction, CP by measuring nitrogen content using an auto-analyzer with Kjeldhal digest and ash by combustion in a muffle furnace for 24 hour at 55$0^{\circ}C$. These homogenized and freeze-dried carcass samples were then scanned with a Foss NIR Systems 6500 visible-NIR spectrophotometer (400-2500nm) (Foss NIR Systems, Silver Spring, MD., US) using Infra-Soft-International, ISI, WinISl software (ISI, Port Matilda, US). The NIRS spectra were analyzed using principal component (PC) analysis. This data was corrected for scatter using standard normal “Variate” and “Detrend” technique. The accuracy of the NIRS calibration equations developed using Partial Least Squares (PLS) for predicting major chemical composition and carcass descriptors- such as body mass (BM), bird dry matter and moisture content was tested using cross validation. Discrimination analysis was also used for sex and strain identification. According to Dr John Shenk, the creator of the ISI software, the calibration equations with the correlation coefficient, $R^2$, between reference data and NIRS predicted results of above 0.90 is excellent and between 0.70 to 0.89 is a good quantifying guideline. The excellent calibration equations for DM ($R^2$= 0.99), fat (0.98) and CP (0.92) and a good quantifying guideline equation for ash (0.80) were developed in this study. The results of cross validation statistics for carcass descriptors, body composition using reference methods, inter-correlation between carcass descriptors and NIRS calibration, and the results of discrimination analysis for sex and strain identification will also be presented in the poster. The NIRS predicted daily gain and calculated daily gain from this experiment, and true daily gain (using data from another experiment with closely related broiler chicken from each of the six strains) will also be discussed in the paper.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.95-103
• /
• 2018

As a guideline for desulfurization and dehumidification pretreatment facility for optimizing utilization of biogas, the $H_2S$ concentration is set at 150 % which can be treated with iron salts, dehumidification is the optimum value for generator operation, and the relative humidity applied at the utilization of biogas in EU is set at 60 %. We have set up the generator facility guidelines to optimize utilization of biogas. The appropriate amount of biogas should be at least 90 % of the total gas generation, and the capacity of generator facility should be set at 20~30 %. In order to equalize the pressure of the incoming gas the generator, a gas equalization tank should be installed and the generator room average temperature should be kept at $45^{\circ}C$ or less. Since the gas is not produced at a certain methane concentration in the digester, the efficiency is lowered. Therefore, it is required to install an air fuel ratio control system according to the change in methane concentration. Therefore, it is necessary to compensate for the disadvantages of biogasification facilities of organic waste resources and optimize utilization of biogas and improve operation of facilities. This study was conducted to optimize biogas utilization of type of organic waste(containing sewage sludge and food waste, animal manure), investigate the facilities problem and propose design, operation guidelines such as pre-treatment facilities and generators.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.77-85
• /
• 2019

Biogasification is a technology that uses organic wastes to reproduce as environmental fuels containing methane gas. Biogasification has attracted worldwide attention because it can produce renewable-energy and stable land treatment with prohibit from landfilling and ocean dumping of organic waste. Biomethane is produced by refining biogas. It is injected into natural gas pipeline or used transportation fuel such as cars and buses. 90 bio-gasification facilities are operating in 2016, and methane gas production is very low due to it is limited to organic wastes such as food waste, animal manure, and sewage sludge. There are seven domestic biomethane manufacturing facilities, and the use of high value-added such as transport fuels and city-gas through upgrading biogas should be expanded. On the other hand, the rapid biogasification of organic wastes in domestic resulted in frequent breakdowns of facilities and low efficiency problems. Therefore, the problem is improving as technical guidance, design and operational technical guidance is developed and field experience is accumulated. However, while improvements in biogas production are being made, there is a problem with low utilization. In this study, the problems of biomethane manufacturing facilities were identified in order to optimize the production and utilization of biogas from organic waste resources. Also, in order to present the design and operation guideline of the gas pretreatment and the upgrading process, we will investigate precision monitoring, energy balance and economic analysis and solutions for on-site problems by facility.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.240-249
• /
• 2020

Objectives: Although the side effects of radiation therapy vary from mucositis to osteomyelitis depending on the dose of radiation therapy, to date, an experimental animal model has not yet been proposed. The aim of this study was to develop an animal model for assessing complications of irradiated bone, especially to quantify the dose of radiation needed to develop a rat model. Materials and Methods: Sixteen Sprague-Dawley rats aged seven weeks with a mean weight of 267.59 g were used. Atraumatic extraction of a right mandibular first molar was performed. At one week after the extraction, the rats were randomized into four groups and received a single dose of external radiation administered to the right lower jaw at a level of 14, 16, 18, or 20 Gy, respectively. Clinical alopecia with body weight changes were compared and bony volumetric analysis with micro-computed tomography (CT), histologic analysis with H&E were performed. Results: The progression of the skin alopecia was different depending on the irradiation dose. Micro-CT parameters including bone volume, bone volume/tissue volume, bone mineral density, and trabecular spaces, showed no significant differences. The progression of osteoradionecrosis (ORN) along with that of inflammation, fibrosis, and bone resorption, was found with increased osteoclast or fibrosis in the radiated group. As the radiation dose increases, osteoclast numbers begin to decrease and osteoclast tends to increase. Osteoclasts respond more sensitively to the radiation dose, and osteoblasts are degraded at doses above 18 Gy. Conclusion: A standardized animal model clinically comparable to ORN of the jaw is a valuable tool that can be used to examine the pathophysiology of the disease and trial any potential treatment modalities. We present a methodology for the use of an experimental rat model that incorporates a guideline regarding radiation dose.

• Toxicological Research
• /
• v.21 no.3
• /
• pp.255-261
• /
• 2005

Gami-Samhwang-San, a herbal prescription for obesity treatment, is composed of seven crude herbs such as Rehmanniae Radix Preparata, Ephedrae Herba, Scutellariae Radix, Acori Gramineri Rhizoma, Polygalae Radix, Typhae Pollen, Armeniacae Semen, Menthae Herba. In this study, marker substances in n-butanol fraction (SH-21-B) from Gami-Samhwang-San were analyzed by high performance liquid chromatography (HPLC) and acute toxicity of standardized SH-21-B was evaluated by good laboratory practices (GLP) guideline of Korea Food and Drug Administration. Therefore we confirmed that there were baicalin of 15.92%, amygdalin of 6.57% and ephedrine of 2.49% in SH-21-B. SH-21-B was administered in rats at dose of 0 mg/kg, 2,000 mg/kg, and 5,000mg/kg. Clinical signs of both sexes of rats were observed daily for 14 days after single oral administration. Two female rats one administered at 2,000 mg/kg and the other administered at 5,000 mg/kg, died, but no dead animal was observed among male rats. Therefore $LD_{50}$ in the female rat is observed to be 8,710 mg/kg, and MLD (Minimun Lethal Dose) of the male rat is observed to be more than 5,000 mg/kg.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.232-239
• /
• 2018

Our study aims to provide a guideline of deer-proof fence heights to prevent roadkill of water deer (Hydropotes inermis), the most frequently killed by a vehicle collision, in South Korea. With 27 water deer in deer ecology center of the National Institute of Ecology, we measured the ability of water deer to jump gradually higher fences from 0.5cm by 10cm until the deterrence rate reached 100%. Ourresultrevealed that the deterrence rate became 96.7% at the fence height of 1.5m and the rate reached 100% at the 1.8m. We believe that our result provides the fundamental information to prepare a standard of deer-proof fence height. This evidence-based standard will contribute to improving the guideline for wildlife crossing construction and management, established by Ministry of Environment Korea.