• 한국전기전자재료학회논문지
• /
• 제28권6호
• /
• pp.408-413
• /
• 2015

Road lighting has emerged in importance as an essential system to secure safety and visibility for drivers and pedestrians. According to the Road Lighting Standards (KS A 3701), the luminance uniformity (U0) should be 0.4, the luminance uniformity for lanes (UI) should be 0.5, and a threshold increment (TI) of 10% should be satisfied. In this study, we conducted simulations using the Relux program in which the secondary optical lens was applied to a 21 W engine. Ten LED engines were installed on a two-way four-lane road, and the simulation result satisfied the requirements with U0 0.47, UI 0.63 and TI 8%. The U0, UI, and TI were compared with the angle of the LED streetlight varied in the range of $9^{\circ}{\sim}15^{\circ}$ with $0.5^{\circ}$ intervals. The range was selected as ${\pm}25%$ of the standard inclination angle of $12^{\circ}$ according to the Road Lighting Standard. The U0 was high and the UI and TI were low when the tilting angle was in the range of $9.5^{\circ}{\sim}10.5^{\circ}$. Consequently, an optimum-design of lighting distribution was obtained for the concrete two-way four-lane road when the inclination angle was $9^{\circ}$.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.39-45
• /
• 2012

More than 80 percent of traffic accidents related with lane departure believed to be the result of crossing the lane due to either negligence or drowsiness of the driver. Lane-departure related accident in the highway usually involve high fatality. Even though LDWS is believed to prevent accident 25% and reduce fatalities by 15% respectively, its effectiveness in performance is yet to be confirmed in many aspects. In this study, the vehicle lateral locations relative to warning zone envelop (earliest and latest warning zone) defined in ISO standard, ECE and NHTSA regulations are compared with respect to various factors including delays, vehicle speed and vehicle heading angle with respect to the lane. Since LDWS is designed to be activated at the speed over 60 km/h, vehicle speed range for the study is set to be from 60 to 100 km/h. The vehicle heading angle (yaw angle) is set to be up to 5 degree away from the lane (abrupt lane change) considering standard for lane change test using double lane-change test specification. The TLC is calculated using factors like vehicle speed, yaw angle and reaction time. In addition, the effect of vehicle type has been considered to assess LDWS safety.

• 치과방사선
• /
• 제20권2호
• /
• pp.315-333
• /
• 1990

This study was performed to measure the skin absorbed doses from full mouth standard intraoral radiography (l4 exposures) in bisecting angle and paralleling techniques. Thermoluminescent dosimeters were used in a phantom. Circular tube collimator(60㎜ in diameter, 20㎝ in length) and rectangular collimator(35㎜ × 44㎜, 40㎝ in length) were set for bisecting angle and paralleling techniques respectively. All measurement sites were classified into 8 groups according to distance from each point of central rays. The results were as follows: 1. The skin absorbed doses from the paralleling technique were significantly decreased than those from the bisecting technique in both points at central ray and points away from central ray. The percentage rates of decrease were greater at points away from central ray than those at central ray. 2. The skin absorbed doses at the lens of eye, parotid gland, submandibular gland and thyroid region were significantly decreased in paralleling techniuqe, but those of the midline of palate remained similar in both techniques. 3. The highest doses were measured at the site 20mm above the point of central ray for the mandibular premolars in bisecting angle technique and at the point of central ray for the mandibular premolars in paralleling techniques. The lowest doses were measured at the thyroid region in both techniques.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.11-19
• /
• 2014

Reliability of the novel automatic system capable of measuring both St$\ddot{o}$ckigt sizing degree and contact angle at a time was evaluated through the calculation of its repeatability and reproducibility based on TAPPI Standard Method T 1200. As the basis weight of paper specimen increased, the repeatability and reproducibility of the automatic system became more improved than those from Hercules sizing test and contact angle test designated on TAPPI Standard Method T 530 and T 558. The more improved repeatability and reproducibility implies that a single tester can obtain the similar results under similar test conditions in spite of repetitive testing using the automatic system, and likewise that multiple testers can respectively reproduce similar data without big variation from the same paper specimen using the automatic system. In conclusion, this study is greatly meaningful in having developed the world's first automatic system to measure both St$\ddot{o}$ckigt sizing degree and contact angle simultaneously with excellent repeatability and reproducibility.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.93-100
• /
• 2022

본 연구에서는 다양한 소수성 조건으로 코팅된 흙 입자 표면이 함수비 조건에 따라 분광정보에 미치는 영향을 평가하였다. 이를 위해 소수성으로 코팅된 표준사의 습윤성 실험 및 분광정보 평가 실험을 수행하였다. 습윤성 평가 결과, 1%, 3% 및 5%로 소수성 코팅된 표준사의 건조시간에 따른 표준사-물 경계면의 접촉각은 각각 약 130°~143°, 약 129°~144°와 약 131°~144°의 범위를 보였다. 이는 동일한 건조시간에서 소수성 코팅 정도가 증가할수록 접촉각은 증가하였지만, 접촉각의 범위는 동일한 범주의 습윤성을 갖는 것을 의미한다. 분광정보 평가 결과, 소수성 상태를 갖는 건조된 표준사는 친수성 상태의 표준사에 비하여 소수성 수준의 증가에 따라 최대분광반사율이 감소한 반면에, 동일한 함수비 조건에서는 소수성 정도가 증가할수록 최대분광반사율이 증가하는 것으로 평가되었다.

• Geomechanics and Engineering
• /
• 제23권2호
• /
• pp.165-178
• /
• 2020

This paper investigates the effect of the jaw's curvature, also known by contact angle and jaw arc central angle (2α), of the Brazilian test apparatus on indirect tensile strength of various rock types. That's why, ten rock samples including limestone, marble, skarn, granite, diorite, and granodiorite were collected from some quarries in different provinces of Iran. Petrographic, mineralogical and textural investigations were performed using thin section analyses. Physical properties of the selected rock samples namely dry and saturated unit weights, porosity, water absorption, and specific gravity were determined for the rock samples. In addition, Brazilian tensile strength at different 2α angles (i.e., 2α = 0°, 10°, 15°, 20°, 45°, and 60°) were determined for the rocks in the laboratory. Results show that the parameter for the rocks is between 3.81 MPa at 2α=0° and 54.76 MPa at 2α=60°. This means that Brazilian tensile strength increased with increasing 2α angle from 0° to 60°. Also, it was found that the highest change rate of the Brazilian tensile strength occurs in range of 2α=15°-30° for most studied rock samples. In some tested samples, the parameter is decreased only at 2α = 60°. The values of Brazilian tensile strength of the rocks tested by flat and standard jaws are near to each other.

• 대한간호학회지
• /
• 제33권5호
• /
• pp.643-650
• /
• 2003

Purpose: This study was conducted to examine the effect of a posture training program, including posture education and spinal exercise as implemented on the elementary school students with scoliosis. Method: The design of this study is nonequivalent sample control group pretest-posttest design. The study subjects were elementary school students attending 7 elementary schools located in G city in Gyungsangbuk-Do. Among them, those who had the Cobb angle between 4～10$^{\circ}$ in spine x-ray who agreed to participate in the study program were selected as the study subjects. The research instruments included the degree of spinal scoliosis(cobb angle), the level of knowledge on posture, and an evaluation following the posture training program. The data were collected from March 1, 2002 to July 30, 2002. The collected data were analyzed by frequency, percentile, mean, standard deviation, t-test, i test and Mann-Whitney U test were using SPSS WIN10.0 program. Result: The elementary school students with scoliosis who received the posture training program have a lower Cobb angle and higher level of knowledge of posture than the elementary school students with scoliosis who did not receive the posture training program. Conclusion: The posture training program was effective on the on Cobb angle and Knowledge of posture in the elementary school students with scoliosis in this study. Therefore, the program training program can be usefully utilized for the students with mild scoliosis in the field of school health.

• 대한치과교정학회지
• /
• 제21권2호
• /
• pp.457-468
• /
• 1991

This investigation was designed to categorize Angle's class III malocclusion groups through analyzing horizontal and vertical components of craniofacial skeleton in Angle's class III malocclusion. The material selected for this study consisted in standard lateral cephalogram of one hundred and fifty five children, seventy four boys and eighty one girls, aged 6 through 15 years, having Angle's class III malocclusion. On the basis of findings of this study, the following results were obtained. 1. In horizontal skeletal classifications,16 groups were classified FMN-A-B, SE-FMN-A according to the Ba-SE-Me, Ba-SE/R. 2. The sequences that have relatively high frequency are as follow; a) Horizontal Group l b) Horizontal Group 3 c) Horizontal Group 5 d) Horizontal Group 9 e) Horizontal Group 4 3. In vertical skeletal classification, 8 groups were classified according to the PMV/PP, PMV/OP, PMV/MP. 4. The sequences that relatively high are as follows; a) Vertical Group 1 b) Vertical Group 3 c) Vertical Group 4 d) Vertical Group 8.

• 대한족부족관절학회지
• /
• 제1권1호
• /
• pp.11-14
• /
• 1997

Hallux valgus is a complex deformity which contains static subluxation of the first metatarsophalangeal joint with lateral deviation of the great toe and medial deviation of the first metatarsal bone. Among the several parameters, radiographic indices are the important ones in the choice of the treatment method. Even though, the normal values of the western peoples are already estabilished, there was no standard values for Korean who has different genetics, and cultural background, till now. So, we tried to estimate the noraml values of the HVA (hallux valgus angle ), IMA ( Intermetatarsal angle) and DMAA (Distal Metatarsal Articular surface Angle) in a normal adult. Fifty normal adult (each 25 male and female) were chosen and took 100 cases of foot radiograph and radiologic indices of the hallux valgus were measured. Average age at the investigation was 34.5 years old. The average HVA is $13.3^{\circ}$, IMA is $8.5^{\circ}$ and DMAA is $34.6^{\circ}$.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.171-183
• /
• 1991

This investigation was designed to categorize Angle's class II malocclusion groups through analyzing horizontal and vertical components of craniofacial skeleton in Angle's class II malocclusion. The material selected for this study consisted in standard lateral cephalogram of two hundred and twenteen children, eighty eight boys and one hundred twenty four girls, aged 6 through 18 years, having Angle's class II malocclusion. On the basis of findings of this study, the following results were obtained. 1. In horizontal skeletal classifications, 16 groups were classified according to FMN-A-B, SE-FMN-A, Ba-SE-Me, Ba-Se/Ra P. The sequences that have relatively high frequency are as follows: a) Horizontal Group 16 b) Horizontal Group 12 c) Horizontal Group 13 d) Horizontal Group 9 & 15 2. In vertical skeletal classification, 8 groups were classified according to the PMV/PP, PMV/Occ. P. PMV/Mn. P. The sequences that relatively high frequency are as follows; a) Vertical Group A b) Vertical Group D c) Vertical Group C d) Vertical Group H 3. In vertical and horizontal skeletal classifications, the sequence that relatively high frequency are as follows; a) Group13-A b) Group16-A & 9-A c) Group12-A & 15-A d) Group16-C