• 해양환경안전학회지
• /
• 제17권1호
• /
• pp.75-82
• /
• 2011

해양에너지는 아직 개발되지 않은 가장 유망한 재생 및 청정에너지 자원 중 하나이다. 특히 우리나라는 세계적으로 보기 드문 조류발전의 적지이며, 이를 이용하기 위해서는 각 해역에 적합한 조류에너지 변환 장치의 개발이 매우 필요하다. 따라서 본 연구에서는 조류발전 방식 중 수평축 로터 블레이드의 최적형상 설계 및 성능평가를 목적으로 날개 끝 손실 모델을 포함하는 날개요소 운동량이론을 적용한 조류터빈 설계기법을 제안하고, 100 kW급 로터 블레이드를 설계하였다. 또한 블레이드 국부위치에서 주속비에 따른 Prandtl의 날개 끝 손실 변화를 비교하였으며, 정격 날개 끝 속도비에서 NACA63812를 사용하여 설계된 로터 블레이드의 동력계수는 0.49로 우수한 성능을 나타내었다.

• 태양에너지
• /
• 제20권4호
• /
• pp.61-67
• /
• 2000

The purpose of this study is to improve heat transfer by attaching rectangular fins to tube. Experiments were carried out under the following conditions - Aspect ratio$(W_f/R_f)$ is 0.7, 1.2 and 1.8. Temperature conversion between high and low positions of water in the thermal storage appeared because maximum density point of water is about $4^{\circ}C$ and inlet direction of working fluid influenced conductive heat transfer Compared with the unfinned tube(bare tube), the rectangular tube increased the ice thermal storage energy and the ice thermal storage energy was increased as aspect ratio was increased.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권1호
• /
• pp.31-35
• /
• 1996

An experiment was conducted on rainbow trout(Oncorhynclus mykiss) for eight weeks to investigate the growth performance of the fish fed with different dietary protein with constant diet energy of $20kJg^{-1}$. Four diets containing 25, 30, 35 and 40% crude protein were used. The highest mean final weight was obtained for the fish fed with diet having 35% protein. Growth performance in terms of Specific Growth Rate (SGR), Food Conversion Ratio (FCR) and Protein Efficiency Ratio (PER) were calculated for each diet. There were no significant differences in SGR but the highest value was exhibited by fish fed with 35% protein diet. Significant differences were found among FCR of different diets. Diets with 35 and 40% crude protein gave better FCR value than that of 25 and 30% crude protein. Although significant differences were not found between PER of different diets but PER of diet with 35% protein was found to be better than PER of both high and low protein diets (diets of 40 and 30% crude protein). It is concluded that diet having 35% protein with protein energy ratio of $17.53mgkJ^{-1}$ was suitable for rainbow trout (O. mykiss) among the protein spectrum used.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.451-454
• /
• 2009

Production and application of biodiesel are expected to grow steadily in the coming years and thus output of its by-product, crude glycerin, will accordingly increase as well. In the present study, gasification of biodiesel by-product as a renewable energy was performed in an entrained flow gasifier to investigate the gasification performance with the operating conditions. Crude glycerin shows a high heating value of 6,000 kcal/kg and low ash and sulphur content. Gasification was conducted in a temperature range of $950\;{\sim}\;1500\;^{\circ}C$. The variation of syngas composition with excess air ratio of 0.17 ~ 0.7 for air or oxygen as a gasification agent was investigated. From the results, syngas heating value, carbon conversion and cold gas efficiency of more than $2500\;kcal/Nm^3$, 95% and 65% were achieved, respectively. The temperature dependency of syngas composition, carbon conversion, and cold gas efficiency shows a similar tendency to excess air ratio at the temperature corresponding to the excess air ratio. The $H_2/CO$ ratio of the product gas was varied from 1.25 to 0.7 with the excess air ratio and this gas composition was favorable for DME synthesis. The optimum excess air ratio for gasification of biodiesel by-product was evaluated to be an approximately 0.35 to 0.4. The present results indicate that crude glycerin can be utilized as a feedstock for gasification to make syngas.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.75.2-75.2
• /
• 2013

Atomic layer deposition (ALD), utilizing self-limiting surface reactions, could offer promising perspectives for future efficient energy conversion devices. The capabilities of ALD for surface/interface modification and construction of novel architectures with sub-nanometer precision and exceptional conformality over high aspect ratio make it more valuable than any other deposition methods in nanoscale science and technology. In the context, a variety of researches on fabrication of active materials for energy conversion applications by ALD are emerging. Among those materials, one-dimensional nanotubular titanium dioxide, providing not only high specific surface area but also efficient carrier transport pathway, is a class of the most intensively explored materials for energy conversion systems, such as photovoltaic cells and photo/electrochemical devices. The monodisperse, stoichiometric, anatase, TiO2 nanotubes with smooth surface morphology and controlled wall thickness were fabricated via low-temperature template-directed ALD followed by subsequent annealing. The ALD-grown, anatase, TiO2 nanotubes in alumina template show unusual crystal growth behavior which allows to form remarkably large grains along axial direction over certain wall thickness. We also fabricated dye-sensitized solar cells (DSCs) introducing our anatase TiO2 nanotubes as photoanodes, and studied the effect of blocking layer, TiO2 thin films formed by ALD, on overall device efficiency. The photon convertsion efficiency ~7% were measured for our TiO2 nanotubebased DSCs with blocking layers, which is ~1% higher than ones without blocking layer. We also performed open circuit voltage decay measurement to estimate recombination rate in our cells, which is 3 times longer than conventional nanoparticulate photoanodes. The high efficiency of our ALD-grown, anatase, TiO2 nanotube-based DSCs may be attributed to both enhanced charge transport property of our TiO2 nanotubes photoanode and the suppression of recombination at the interface between transparent conducting electrode and iodine electrolytes by blocking layer.

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.133-140
• /
• 2014

본 연구의 목적은 국내 화력발전소에서 사용중인 인도네시아 석탄촤의 연소반응율을 연구하는 것이다. 석탄촤의 반응율은 External, Internal effectiveness factor를 고려하여 입자 내부 및 외부확산을 정량적으로 정리하였으며, Random pore model을 사용하여 탄소변환율에 따른 입자내부비표면적의 변화를 반영하였다. 가열 및 측정이 가능한 WHR(Wire Heating Reactor)를 활용하여 반응시간을 측정함으로써 석탄촤의 반응율을 도출하였고 BET(Brunauer-Emmett-Teller) 및 TGA(Thermo-Gravimetric Analysis) 장비를 활용하여 석탄촤의 물리적인 특성인 내부비표면적과 Random pore model의 구조변수(${\Psi}$)를 측정하였다. 석탄 종에 따른 활성화에너지 및 빈도인자를 도출하기 위해 아역청탄인 BARAMULTI, ENERGYMAN, AGM탄을 사용하였다. 본 연구 결과에서 External, Internal effectiveness factors를 통해 확산에 따른 kinetics를 비교한 결과 외부 확산 보다 내부 확산의 영향이 지배적임을 확인하였다. 최종적으로 내부 및 외부 확산에 대한 영향을 고려한 3종의 석탄촤 Intrinsic kinetics의 활성화에너지는 110~118 kJ/mol의 값을 보였다.

• 동력기계공학회지
• /
• 제20권6호
• /
• pp.87-92
• /
• 2016

This research dealt with performance characteristics of OTEC system applying an ejector and additional pump. Each system using five kinds of working fluids was analyzed, and primary parameters with respect to entrainment ratio were examined: Turbine gross power, evaporation capacity, pump work, efficiency and volume flow ratio. The primary results were as following. The efficiency of ejector-pump OTEC system was dependent on entrainment of the ejector. The degree of efficiency change was different from applied working fluid, and amount of pump work was turned out to be primary factor affected system efficiency. Meanwhile, optimized entrainment ratio was different from applied working fluid since their different vapor density. System efficiency at optimized entrainmet ratio of each working fluid was around 5%, showing minor difference each other.

• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.246-251
• /
• 2013

Screen printing is commonly used to form the front/back electrodes in silicon solar cell. But it has caused high resistance and low aspect ratio, resulting in decreased conversion efficiency in solar cell. Recently the plating method has been combined with screen-printed c-Si solar cell to reduce the resistance and improve the aspect ratio. In this paper, we investigated the effect of light induced silver plating with screen-printed c-Si solar cells and compared their electrical properties. All wafers were textured, doped, and coated with anti-reflection layer. The metallization process was carried out with screen-printing, followed by co-fired. Then we performed light induced Ag plating by changing the plating time in the range of 20 sec~5min with/without external light. For comparison, we measured the light I-V characteristics and electrode width by optical microscope. During plating, silver ions fill the porous structure established in rapid silver particle sintering during co-firing step, which results in resistance decrease and efficiency improvement. The plating rate was increased in presence of light lamp, resulting in widening the electrode with and reducing the short-circuit current by shadowing loss. With the optimized plating condition, the conversion efficiency of solar cells was increased by 0.4% due to decreased series resistance. Finally we obtained the short-circuit current of 8.66 A, open-circuit voltage of 0.632 V, fill factor of 78.2%, and efficiency of 17.8% on a silicon solar cell.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.343-355
• /
• 2018

A wide-voltage-conversion range bidirectional DC-DC converter is proposed in this paper. The topology is comprised of one typical LC energy storage component and a special common grounded asymmetric H-bridge with four active power switches/anti-parallel diodes. The narrow output PWM voltage is generated from the voltage difference between two normal (wider) output PWM voltages from the asymmetric H-bridge with duty cycles close to 0.5. The equivalent switching frequency of the output PWM voltage is double the actual switching frequency, and a wide step-down/step-up ratio range is achieved. A 300W prototype has been constructed to validate the feasibility and effectiveness of the proposed bidirectional converter between the variable low voltage side (24V~48V) and the constant high voltage side (200V). The slave active power switches allow ZVS turn-on and turn-off without requiring any extra hardware. The maximum conversion efficiency is 94.7% in the step-down mode and 93.5% in the step-up mode. Therefore, the proposed bidirectional topology with a common ground is suitable for energy storage systems such as renewable power generation systems and electric vehicles with a hybrid energy source.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권11호
• /
• pp.1629-1634
• /
• 2008

A trial was conducted to determine the effect of low crude protein (CP) diets with constant metabolizable energy to crude protein (ME:CP) ratio on growth, body composition and nutrient utilization of broiler chicks from 1 to 26 days of age. Four dietary treatments having four levels of CP and ME as 23, 22, 21 and 20% and 3,036, 2,904, 2,772 and 2,640 kcal/kg, respectively, were formulated and a ME:CP ratio of 132 was maintained in all the diets. Digestible lysine was maintained at 1.10 of the diet. A total of 1,760 day-old Hubbard broiler chicks were randomly divided into 16 experimental units and each diet was offered to four experimental units at random. Feed intake was increased (p<0.05) while weight gain and feed conversion ratio were adversely affected (p<0.05) when the diets with low CP and ME were fed to broilers. Total protein intake and total ME intake were linearly decreased (p<0.05) and protein efficiency ratio and energy efficiency ratio were lower (p<0.05) than in the chicks fed dietary regimen with 22% CP and 2,904 kcal/kg ME. The whole body analysis of the birds revealed that chicks fed the lowest dietary regimens retained less (p<0.05) nitrogen and more ether extract than chicks fed the control diet, however, body dry matter, total body ash and fat free body protein were not affected. Similarly, protein and energy utilization were also unaffected by the dietary treatments. In summary, chicks fed low CP diets with constant ME:CP ratio grew slower, used feed less efficiently and retained less protein and more body fat than chicks fed the control diet.