• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.265-271
• /
• 2008

TCP(Tape Carrier Package), COG (Chip On Glass), COF(Chip On Film) are three methods for connecting LDI(LCD Driver IC) with LCD panels. Especially COF is growing its portion of market place because of low cost and fine pitch correspondence. But COF has a problem of the lead broken failure in LCD module process and the usage of customer. During PCB (Printed Circuit Board) bonding process, the mismatch of the coefficient of thermal expansion between PCB and D-IC makes stress-concentration in COF lead, and also D-IC bending process during module assembly process makes the level of stress in COF lead higher. As an affecting factors of lead-broken failure, the effects of SR(Solder Resister) coating on the COF lead, surface roughness and grain size of COF lead, PI(Polyimide) film thickness, lead width and the ACF(Anisotropic Conductive Film) overlap were studied, The optimization of these affecting manufacturing processes and materials were suggested and verified to prevent the lead-broken failure.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.58-67
• /
• 2005

To overcome limitations of test scope, schedule and cost, M&S(Modeling & Simulation) technique has been applied for T&E(Test and Evaluation) of the state-of-art weapon systems. This paper proposes an air defense simulation software framework to reduce both redundancy an[1 programming errors in system simulator. The proposed framework consists of a 'model' and a 'middleware' The 'middleware' is a reliable communication service layer that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP, UDP and etc. The main role of 'model' is to schedule and to run the real-time distributed simulation. The proposed framework has been applied to M-SAM(Middle range Surface to Air Missile) system simulator. The proposed framework's scheduling and communication performance results are satisfactory and were measured by hardwired NTP(Network Timer Protocol) time-stamp with GPS(Global Positioning System) timer for better precision.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1665-1674
• /
• 2000

This paper treats the interworking of LAN-based networks like TCP over the ATM protocol stack in an ATM multicast session. Multicast connection will cause CIP since multicast group members form a connection tree by some tree methods and share the connected tree. The paper solve the CIP problem through a block-by-block transmission using ABT/IT method. ABT/IT RM cell is modified and block scheduling algorithm considering the traffic types is applied to each ATM switch using the enhanced RM cell. Block scheduling algorithm will avoid the indiscriminate discard of UBR traffic when congestion occurs and it can provide an efficient and fair service. The paper builds a block scheduler system and suggests the block scheduling algorithm for a multicast session in an ATM switch. UBR traffics arriving at the switch trough each VC is classified by the traffic type and stored at class buffer and thereafter indisciminately transmitted. When block scheduling algorithm is applied it will improve the UBR traffic performance such as end-to-end delay cell block loss ration etc. This paper evaluated the performance of block scheduling algorithm through the simulation using the C language and data structure.

• 융합보안논문지
• /
• 제8권2호
• /
• pp.71-78
• /
• 2008

이 연구는 인터넷 망과 조직이 자체보안을 위해 별도로 구축한 내부 망을 하나의 망으로 합쳐서 통합 체계를 구축하여 경제적이며 안전하게 인터넷과 내부 응용 서비스를 사용하는 방안을 제시하고자 한다. 기존에 일부에서 사용되고 있는 망 전환 장치는 기계적인 한계가 있으며 인터넷과 내부 망을 위한 별도의 네트워크를 구성해야 하는 문제점 때문에 연동성과 보안의 목표인 인증 및 암호화에 대한 대책이 부족하고 체계 구축 시 많은 비용이 소요되는 단점이 있다. 이에 ATM Forum 역 다중화 기술과 IPSec을 적용하여 네트워크 성능을 향상하고 구축비용을 절감하며 신뢰성 있는 이중 방어 체계의 구축 방안을 제안하고자 한다. 아울러 망 관리 기술을 이용한 Scanning 공격 기술과 SNMP, Spooler Port 등의 취약점을 집중 분석한 후 본 논문에서 제안한 이중 방어 체계 기반의 대응 방안을 제시하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.151-154
• /
• 1996

A medical record and radiographic image transmission system has been developed using high speed communication network. The databases are designed to store and transmit the data acquired from the scanner. To maximally utilize the communication bandwidth, the medical records and radiographic images are compressed using the G3 facsimile and JPEG coding standard method respectively. TCP/IP, OOP and window based system software enables the modular design, future expandability, open system interconnectivity, and graphical user interface. In addition, the fast and easy data base access capability and diverse image manipulation functions are also implemented.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1792-1798
• /
• 2017

Event Data Recorder(Car Black-Box) with WiFi dongle have been released, and the platform of the majority is the Linux platform. This is because the platform development is possible in little investment cost by reducing the source licensing costs by taking advantage of the open source. But utilizing Linux platform has the limitations of boot-up time and consuming processing power due to the limitation of battery capacity, to be cost-competitive to minimize the use of memory. In this paper, the real-time operating system(RTOS) is utilized to optimize these portions. MP4 encoder and Muxer are developed to be about ten seconds boot up and minimized memory. It has the advantages of operating at lower power consumption than the Linux utilizing WiFi dongle. Utilizing a WiFi dongle is to provide a progressive download feature on smart phones to lower product prices. But RTOS has the weakness in WiFi. Porting TCP /IP, Web and DHCP server and combination with the USB OTG Host interface by implementing the protocol stack are developed for WiFi. And also SPI NOR flash memory is utilized for faster boot time and cost reductions, low processing power to be consume. As the results, the developed proved the 10 seconds booting time, 24 frame rate/sec. and 10% lower power consumption.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.395-398
• /
• 2004

본 논문은 원격지의 데이터와 각종 디바이스들을 ON/OFF 하고, 상태를 웹 브라우져를 통하여 실시간으로 확인 할 수 있도록 하는 임베디드 시스템과 응용모듈 제작에 관한 논문이다. 최근 초고속 인터넷 발달과 인터넷 시설이 잘 갖추어진 특성 때문에 원격지의 각종 데이터와 디바이스 상태들을 직접 실시간으로 제어하고 검출할 수 있는 기술은 다방면으로 응용분야가 광범위하다고 생각된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제20권2호
• /
• pp.79-82
• /
• 1997

Image-based three dimensional radiation treatment planning(3D RTP) has a potential of generating superior treatment plans. Advances in computer technology and software developments quickly make 3D RTP a feasible choice for routine clinical use. However, it has become clear that an evaluation of a 3D plan is more difficult than a 2D plan. A number of tools have been developed to facilitate the evaluation of 3D RTP both qualitatively and quantitatively. For example, beam's eye view(BEV) is one of the most powerful and time-saving method as a qualitative tools. Dose-volume histogram(DVH) has been proven to be one of the most valuable methods for a quantitative tools. But it has a limitation to evaluate several different plans for biological effects of the tissue and critical organ. Therefore, there is a strong interest in developing quantitative models which would predict the likely biological response of irradiated organs and tissues, such as tumor control probability(TCP) and normal tissue complication probability(NTCP). DVH and NTCP of hepatoma were evaluated for three dimensional conformal radiotherapy(3D CRT). Also, 3D RTP was analysed as a dose optimization based on beam arrangement and beam modulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.388-390
• /
• 2004

In this paper, we performed the implementation of image transmission server system using embedded system that is for the specified object and easy to install at any places and move to wherever. Since the embedded system has lower capability than PC, we have to reduce the quantity of calculation and transmission. The image compression like JPEG, needs that the server calculates for making compressed image, makes the server carry the load. So we compresses the image at the server and transmit the codes to the clients connected, then the received codes from server are decoded and displayed at the clients. In this process to make the image compression and transmission effectively, we decrease the procedure as simple as possible to transmit the data in almost real-time. We used the Redhat linux 9.0 OS at the host PC and the target board based on embedded linux. The image sequences are obtained from the camera attached to the FPGA board with ALTERA chip. For effectiveness and avoiding some constraints, we made the device driver. Generally the image transmission server is PC, but using the embedded system as a server makes the server portable and cheaper than the system based on PC.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1783-1786
• /
• 2007

The copper film coated by Sn is often used in various applications such as LCD, Mobile Phone and etc. Especially, when the film is used as tape carrier package(TCP) of LCD panel, the film is repeatedly applied by mechanical or(and) thermal stress and then is often failed. Therefore, to guarantee the reliability of the electrical devices using the film, the tensile and fatigue characteristics of the film are important. In this study, to obtain the tensile and fatigue characteristics of the film, the specimen was fabricated by etching process to make a smooth specimen of 2000 ${\mu}m$ width, 8000 ${\mu}m$ length and 15.26 ${\mu}m$ thickness. The 2 kinds of specimen were fabricated by other manufacturing process. These specimens had values of Young's modulus(80.2GPa) lower than literature values(108${\sim}$145GPa) for bulk values, but had high values of the yield and ultimate strength as 317MPa and 437MPa, respectively. And fatigue test of load-control with 20Hz frequency was performed.