• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.38-50
• /
• 1999

Currently many devices reproduce electronic images in the various ways. However the color that is reproduced in any device is different from the original color due to the difference in the gamut between devices. In this paper, an image dependent gamut mapping method is proposed. This method clips the chroma with compensating for the change of lightness caused by the lightness scaling. The anchor point, which is the center point in the mapping, is set as a lower point by the proposed method than a point by the conventional mapping method. This reduces the color difference between point. In addition, to heighten the color contrast on the constant hue, the different two mapping methods are applied to the printer gamut which is divided in two region, bright region and dark region. Consequently, the printer output image was highly consistent with the corresponding monitor image.

• Clinics in Shoulder and Elbow
• /
• v.18 no.2
• /
• pp.86-90
• /
• 2015

Background: Although there are several methods for evaluating bone quality, Hounsfield units (HU), a standardized computed tomography (CT) attenuation coefficient, provide a useful tool for estimating focal bone mineral density (BMD). The aim of this study is to investigate the HU for evaluating the degree of osteoporosis in greater tuberosity with regard to anchor positioning. Methods: Forty patients diagnosed as normal on shoulder CT were included and categorized according to age and gender. Axially sectioned CT images were processed to 3-dimensional models containing information about bone quality using Mimics (14.11 platform v14.1.1.1 Materialise). Three-dimensional anchors were simulated and positioned according to 6 regions of interest (ROI) in the greater tuberosity classified using Tingart's system. Mean HU of intra-anchor volumes in the 6 regions was measured. Results: A significant decrease in HU was observed with increasing age (p=0.0001) and menopause (p<0.001). A significant difference in HU was found between male and female groups with males showing the higher values (p=0.0001). HU of proximal areas of ROI was higher than those of distal areas (p<0.005). However, although mean HU of distal posterior ROI showed the lowest values, no statistically significant difference was found between anterior, middle, and posterior regions (p=0.087). Conclusions: Mean HU of ROIs provides a tool for preoperative assessment of focal BMD, which is a factor of suture anchor stability and can be used to aid decision-making regarding secure anchor positioning for rotator cuff repair. Our data support that the most secure point is the proximal regions of ROI.

• Proceedings of the Korean Printing Society Conference
• /
• 2002.05a
• /
• pp.10-18
• /
• 2002

On the process of cross-media color reproduction, a key feature is the use of gamut mapping techniques to adjust the different color gamuts between displays and printers. Even though a number of GMAs have been published, but there are no method satisfactory enough for more exect color reproduction. In this paper, the gamut mapping methods of nearest point clipping(NPC), centroid clipping (SLIN), straight clipping and cusp clipping(CUSP) were tested and analyzed with color difference, and a new gamut mapping algorithm based on variable anchor point method was proposed.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.22-22
• /
• 2009

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2428-2435
• /
• 2014

Numerical analysis with ALE (Arbitrary Lagrangian Eulerian) Adaptive Meshing technique was performed to evaluate the pullout capacity of the embedded suction anchors (ESA) in uniform clay. The numerical method was verified by the previous study, analytical results based on limit-equilibrium theory and centrifuge tests. The pullout capacity of the ESA under horizontal, vertical, and inclined loading were evaluated, and the effect of initial rotation of the ESA on pullout capacity was also investigated. The analysis results showed that the maximum horizontal capacity was obtained at the mid-point, and the each vertical capacity gave the similar value regardless of the loading points. Furthermore, the inclined capacity was decreased as the load inclination angle increased at the mid-point of the anchor, and almost the same pullout capacity was obtained when the initial rotation angles were below 30 degrees.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2009

The paper describes results of a sensitivity study on an optimum mooring cost as a function of safety factor and allowable maximum offset of the offshore floating structure by finding the anchor leg component size and the declination angle. A harmony search (HS) based mooring optimization program was developed to conduct the study. This mooring optimization model was integrated with a frequency-domain global motion analysis program to assess both cost and design constraints of the mooring system. To find a trend of anchor leg system cost for the proposed sensitivity study, optimum costs after a certain number of improvisation were found and compared. For a case study a turret-moored FPSO with 3 ${\times}$ 3 anchor leg system was considered. To better guide search for the optimum cost, three different penalty functions were applied. The results show that the presented HS-based cost-optimum offshore mooring design tool can be used to find optimum mooring design values such as declination angle and horizontal end point separation as well as a cost-optimum mooring system in case either the allowable maximum offset or factor of safety varies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.991-1000
• /
• 2010

The Hierarchical Mobile IPv6 (HMIPv6) has been proposed to accommodate frequent mobility of the Mobile Node. HMIPv6 can effectively reduce the signaling overhead and latency. However, it has a problem that the registration of a mobile node concentrates on the furthest MAP(Mobility Anchor Point) when the mobile node enters into a new domain. This paper proposes a new load distribution mechanism by using the concept of Nash Bargaining Solution. The main advantage of the proposed scheme can prevent load concentration from being registered to the specified MAP based on the weight value according to the available resource-ratio of a MAP. With a simulation study, the proposed scheme can improve network performance under widely diverse traffic load intensities.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.371-380
• /
• 2001

In this paper, lightness mapping for uniform color distribution and gamut mapping for maximum chroma reproduction are proposed. In the conventional lightness mapping, the average lightness difference between the two gamut is increased and different color changes in bright and dark regions are also increased. To solve these problems, a lightness mapping is proposed that minimizes the lightness difference of the cusps at each hue angle and produces same color changes in bright and dark regions. Also, gamut mapping that utilize variable anchor point and an anchor point are proposed for maximum chroma reproduction and uniform color change. Accordingly, the proposed algorithm can reproduce high quality images with low-cost color devices.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.351-356
• /
• 2004

The binding update of the Mobile IPv6 which does a route optimization in basic by the node which moves frequently brings about the signaling traffic increase of binding update. It supplements this the MAP(Mobile Anchor Point) for to let, and Hierarchical Mobile IPv6 which considers a macro mobility and a micro rambling regional mobility was proposed. But Mobile IPv6 when transmitting the packet, always does to pass by the mP, the packet intensive actual condition of the MAP to occur it does not guarantee a route optimization. In this study, It accomplishes the course improvement which considers the mobility of mobile node and it interprets the relaxation quality of packet intensive actual condition with the MAP

• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.59-71
• /
• 2009

Measuring ink penetration is one of the best ways to know paper printability. Ink penetration was effected by physical properties of newsprint paper. This study was carried out for the purpose of improvement printability with ink penetration of domestic newsprint paper. The samples were prepared by means of 20 newsprint paper manufacture company in Korea, and were tested by IGT printability tester. The results of this experiments showed that the depth of ink penetration according to the printing pressure. The maximum points in ink transfer curve and the coefficients of oil absorption of the papers also depend mainly upon the situation of anchor points.