• Journal of Magnetics
• /
• 제16권4호
• /
• pp.379-385
• /
• 2011

This paper presents an optimal design of a direct-drive permanent magnet synchronous generator for a small-scale wind energy conversion system. An analytical model of a small-scale grid-connected wind energy conversion system is presented, and the effects of generator design parameters on the payback period of the system are investigated. An optimization procedure based on genetic algorithm method is then employed to optimize four design parameters of the generator for use in a region with relatively low wind-speed. The aim of optimization is minimizing the payback period of the initial investment on wind energy conversion systems for residential applications. This makes the use of these systems more economical and appealing. Finite element method is employed to evaluate the performance of the optimized generator. The results obtained from finite element analysis are close to those achieved by analytical model.

• 한국CDE학회지
• /
• 제21권2호
• /
• pp.39-49
• /
• 2015

This paper presents the single objective design optimization of plate-fin heat sink equipped with fan cooling system using Genetic Algorithm. The proper heat sink and fan model are selected based on the previous studies. And the thermal resistance of heat sinks and fan efficiency during operation are calculated according to specific design parameters. The objective function is combination of thermal resistance and fan efficiency which have been taken to measure the performance of the heat sink. And Decision making procedure is suggested considering life time of semiconductor and Fan Operating cost. And also Analytical Model used for optimization is validated by Fluent, Ansys 13.0 and this model give a quite reasonable and reliable design.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.87-94
• /
• 1997

The circular plate resting on Boussinesq's half-space model under axisymmetric loading is studied by a finite element procedure to evaluate the distribution of contact pressure between plate and elastic half-space. The displacement of half-space due to axisymmetric surface loading can be evaluated by double integration of Boussinesq's solution. On that case the analytical integration can be executed for the radial direction but the analytical integration for the circumferential direction is impossible and the numerical integration should be considered. With the radial integration we can get non-dimensional function. Then the numerical integration for the formula is executed for the circumferential direction and the results are approximated 5th order Polynomials by using the least square method. With these 5th order approximate formula, the flexibility matrix of half-space is constructed as the coefficient matrix of nodal contact pressure by the finite element procedures. Iteration procedures are attempted by using this method to determine the separated region.

• 전산구조공학
• /
• 제4권4호
• /
• pp.97-106
• /
• 1991

주-부 구조물의 진동 특성을 파악하기 위한 새로운 방법인 frequency window method를 다중 지지되고 구조물간의 커플링이 강한 주-부 구조물을 해석하였다. 다항식의 합으로 표현된 특성 방정식과 이 식의 해는 기존의 고유치 해석 방법의 결과와는 다른 새로운 것으로 frequency window method의 주된 장점으로는 공진과 커플링 현상을 정량적으로 파악할 수 있는 피라미터의 정의, 전체 주-부 구조물의 모드특성을 나타내는 해석적인 식과 반복 기법의 도입으로 인한 해석 결과의 정확성등이 있다.

• 약학회지
• /
• 제60권1호
• /
• pp.15-20
• /
• 2016

Globotriaosylsphingosine (lyso Gb3) is considered as one of the biomarkers for Fabry disease. A rapid and simple UPLC-MS/MS method was developed for the determination of reliable biomarker, lyso Gb3. Total analytical procedure takes only 15 min including sample preparation and MS/MS analysis. Limit of detection was 0.85 ng/ml (S/N=3). The calibration curve was linear over the range of 2.0~400.0 ng/ml ($R^2=0.9999$). Inter-day and intra-day assay accuracy were 93.4~100.6% (RSD, 0.6~6.0%) and 97.5~100.7% (RSD, 3.6~5.2%). Absolute recoveries of 97.6~98.6 showed excellence of a new analytical method. The method was applied to human and mice urines, proved the suitability for the quantification of lyso-Gb3 for screening, diagnosis and therapeutic monitoring of Fabry disease patients.

• Journal of Communications and Networks
• /
• 제13권2호
• /
• pp.142-148
• /
• 2011

Because currently available wireless technologies are not appropriate for wireless body area networks (WBANs), the IEEE 802.15.6 standard was introduced by the IEEE 802.15.6 Task Group to satisfy all the requirements for a monitoring system that operates on, in, or around the human body. In this work, we develop an analytical model for evaluating the performance of an IEEE 802.15.6-based WBAN under saturation condition and a noisy channel. We employ a three-dimensional Markov chain to model the backoff procedure as specified in the standard. Probability generating functions (PGFs) are used to compute the performance descriptors of the network. The results obtained from the analytical model are validated by simulation results. Our results indicate that under saturation condition, the medium is accessed by the highest user priority nodes at the vast majority of time while the other nodes are starving.

• Structural Engineering and Mechanics
• /
• 제42권6호
• /
• pp.883-897
• /
• 2012

Cold-formed channel sections are used in a variety of applications in which they are required to absorb deformation energy. This paper investigates the collapse behaviour and energy absorption capability of cold-formed steel channels with flange edge stiffeners under large deformation major-axis bending. The Yield Line Mechanism technique is applied using the energy method, and based upon measured spatial plastic collapse mechanisms from experiments. Analytical solutions for the collapse curve and in-plane rotation capacity are developed, and used to model the large deformation behaviour and energy absorption. The analytical results are shown to compare well with experimental values. Due to the complexities of the yield line model of the collapse mechanism, a simplified procedure to calculate the energy absorbed by channel sections under large bending deformation is developed and also shown to compare well with the experiments.

• Computers and Concrete
• /
• 제5권2호
• /
• pp.155-174
• /
• 2008

A new approach for nonlinear finite element analysis of corroded reinforcements in RC structures is elaborated in the article. An algorithmic procedure for producing the tension-stiffening curve of RC elements taking into consideration most of effective parameters, e.g.: the rate of steel bar corrosion, bond-slip behavior, concrete cover and amount of reinforcement, is illustrated. This has been established on both experimental and analytical bases. This algorithm is implemented into a nonlinear finite element analysis program. The abilities of the resulted program have been studied by modeling some experimental specimens showing a reasonable agreement between the analytical and experimental findings.

• 한국환경보건학회지
• /
• 제9권1호
• /
• pp.89-93
• /
• 1983

Various analytical methods for p-Nitrophenol derivatives have been reported as follows. 1) Thin-Layer Chromatography, 2) Gas Chromatography, 3) Cholinesterase Activity Determination, 4) Diazo Method, 5) Nitrophenol Method, 6) Indophenol Method. But these methods are mainly analyse total quantity of p-Nitrophenol and are not available for the seperation and pose some analytical problems associated with extensive clean up procedure. A rapid and simple method was developed for the seperation and quantitation for the p-Nitrophenol and it's derivatives by HPLC. Also an experiment was undertaken by the authors for the quantitation of the p-Nitrophenol in the blood of the intoxicated body. Levels of p-Nitrophenol ranging from approximately 0.10 to $1.69 \mu g/ml$ for Parathion and $3.44 \mu g/ml$ for EPN in each sample were measured with the average recovery of $95.5\pm0.52%$

• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2773-2781
• /
• 1993

Laplace's equation is, perhaps, the most important equation, which governs various kinds of physical phenomena. Due to its importance, there have been several numerical techniques such as the finite element method, the finite difference method, and the boundary element method. However, these techniques do not appear very effective as they require a substantial amount of numerical calculation. In this paper, we develop a new most efficient technique based on analytic solutions for Laplace's equation in some convex polygons. Although a similar approach was used for the same problem, the present technique is unique as it solves directly Laplace's equation with the utilization of analytical solutions.