• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1024-1029
• /
• 2017

A novel analytic solution has been derived for the bird-cage receiver coil of a magnetic resonance imaging (MRI) system, which is widely used in 3-dimensional medical imaging, by transforming the coil into an equivalent circuit model by using a transmission matrix-based circuit analysis. The bird-cage coil composed of N legs is divided into a cell for which input impedance is to be analyzed and the remaining N-1 cells, and then a transmission matrix corresponding to the N-1 cells is converted into a circuit to transform the 3-dimensional bird-cage coil into the 2-dimensional equivalent circuit model, which is suitable to derive the analytic solution for the input impedance. The proposed method derives directly the analytic solution for the input impedance at an arbitrary point of the coil unlike the conventional analytic solution of a bird-cage coil, so that it can be used not only for resonance frequency calculations but also for various coil characteristics analyses. Since the analytic solution agreed well with the results of computational simulations, it can be useful for the impedance matching of a coil and the analysis and the design of a multi-tune bird-cage coil.

• 전기학회논문지P
• /
• 제53권3호
• /
• pp.129-133
• /
• 2004

As In DS/CDMA(direct sequence code division multiple access) system, the system capacity is limited by multiple access interference(MAI), and self-interference(SI) resulting from the multi-path propagation of the desired user signal. This paper, which the approximated analytic chip waveforms are nearly the same as the computer generated chip waveforms are shown. And then, the BER(Bit Error Rate) performances in CDMA system using the approximated analytic chip waveforms are shown.

• 한국전자통신학회논문지
• /
• 제8권8호
• /
• pp.1235-1240
• /
• 2013

본 논문에서는 색분산이 최적으로 보상된 광통신 시스템에서 자기위상변조와 색분산으로 인해 열화되는 신호의 아이페널티에 대해 근사적인 수학식을 유도하였다. 이러한 분석 연구를 통해 최적으로 색분산 보상된 광통신 시스템에서 신호의 왜곡에 대한 근사식을 얻을 수 있다. 우리는 이 근사식의 효용성을 보이기 위해서 이전 연구의 시뮬레이션 결과와 근사식의 결과를 비교하는 결과를 보인다. 본 논문의 결과를 이용하면 복잡한 비선형 시뮬레이션을 통해 얻을 수 있는 광신호의 왜곡에 대해 손쉽게 그 결과를 예측할 수 있으며, 각종 시스템 파라미터가 시스템에 미치는 영향도 쉽게 파악할 수 있다.

• Biomedical Engineering Letters
• /
• 제8권4호
• /
• pp.383-392
• /
• 2018

For prompt gamma ray imaging for biomedical applications and environmental radiation monitoring, we propose herein a multiple-scattering Compton camera (MSCC). MSCC consists of three or more semiconductor layers with good energy resolution, and has potential for simultaneous detection and differentiation of multiple radio-isotopes based on the measured energies, as well as three-dimensional (3D) imaging of the radio-isotope distribution. In this study, we developed an analytic simulator and a 3D image generator for a MSCC, including the physical models of the radiation source emission and detection processes that can be utilized for geometry and performance prediction prior to the construction of a real system. The analytic simulator for a MSCC records coincidence detections of successive interactions in multiple detector layers. In the successive interaction processes, the emission direction of the incident gamma ray, the scattering angle, and the changed traveling path after the Compton scattering interaction in each detector, were determined by a conical surface uniform random number generator (RNG), and by a Klein-Nishina RNG. The 3D image generator has two functions: the recovery of the initial source energy spectrum and the 3D spatial distribution of the source. We evaluated the analytic simulator and image generator with two different energetic point radiation sources (Cs-137 and Co-60) and with an MSCC comprising three detector layers. The recovered initial energies of the incident radiations were well differentiated from the generated MSCC events. Correspondingly, we could obtain a multi-tracer image that combined the two differentiated images. The developed analytic simulator in this study emulated the randomness of the detection process of a multiple-scattering Compton camera, including the inherent degradation factors of the detectors, such as the limited spatial and energy resolutions. The Doppler-broadening effect owing to the momentum distribution of electrons in Compton scattering was not considered in the detection process because most interested isotopes for biomedical and environmental applications have high energies that are less sensitive to Doppler broadening. The analytic simulator and image generator for MSCC can be utilized to determine the optimal geometrical parameters, such as the distances between detectors and detector size, thus affecting the imaging performance of the Compton camera prior to the development of a real system.

• Steel and Composite Structures
• /
• 제31권6호
• /
• pp.591-600
• /
• 2019

Based on the energy-variational principle, a coupling vibration analysis model of high-speed railway simply supported beam bridge-track structure system (HSRBTS) was established by considering the effect of shear deformation. The vibration differential equation and natural boundary conditions of HSRBTS were derived by considering the interlayer slip effect. Then, an analytic calculation method for the natural vibration frequency of this system was obtained. By taking two simply supported beam bridges of high-speed railway of 24 m and 32 m in span as examples, ANSYS and MIDAS finite-element numerical calculation methods were compared with the analytic method established in this paper. The calculation results show that two of them agree well with each other, validating the analytic method reported in this paper. The analytic method established in this study was used to evaluate the natural vibration characteristics of HSRBTS under different interlayer stiffness and length of rails at different subgrade sections. The results show that the vertical interlayer compressive stiffness had a great influence on the high-order natural vibration frequency of HSRBTS, and the effect of longitudinal interlayer slip stiffness on the natural vibration frequency of HSRBTS could be ignored. Under different vertical interlayer stiffness conditions, the subgrade section of HSRBTS has a critical rail length, and the critical length of rail at subgrade section decreases with the increase in vertical interlayer compressive stiffness.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.465-468
• /
• 2001

An objection of this study is to develop a high stable analytic system of radioactive pulses. The proposed system consists of an amplifying circuit with 60dB gain, a programmable power supply unit which can generate DC voltage up to 1, 500V, and a digital signal processor. Pulse height distribution in accordance with pulse counts is important data in analyzing radioactive pulses. In this study, AD convertor (12bit, l00ns) and DSP (TMS 320C31-60) are used to analyze the pulse height, and the analytic system is designed to be operated in PC-networking.

• 한국정보시스템학회지:정보시스템연구
• /
• 제16권3호
• /
• pp.109-132
• /
• 2007

In the paper, we builds an advanced new credit evaluation system for Micro-small sized individual firms through appropriate evaluation factors derived by logistic regression analysis for credit evaluation model using in Korean Federation of Credit Guarantee Foundations, and the weights of factors computed by analytic hierarchy process(AHP). Industry characteristics are more applied to previous credit model with the additional the financial fact-information and non-financial judgement-information. Our results show that the financial factors have become more important than three years ago. Moreover, in the non-financial factors, the fact-information factors consider more important then the judgement-information factors. A new credit evaluation system is developed based on this credit evaluation model.

• 대한수학회지
• /
• 제38권1호
• /
• pp.87-99
• /
• 2001

We prove that the germ of a CR mapping f between real analytic real hypersurfaces has a holomorphic extension and satisfies a complete system of finite order if the source is of finite type in the sense of Bloom-Graham and the target is k-nondegenerate under certain generic assumptions on f.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.2-2
• /
• 2000

This paper presents an adaptive control against uncertainties in tail-controlled STT (skid-to-Turn) missiles. First, we derive an analytic uncertainty model from a parametricaffine missile model developed by the authors. Based on this analytic model, an adaptive feedbacklinearizing control law accompanied by a sliding model control law is proposed. We provide analyses of stability and output tracking performance of the overall adaptive missile system. The performance and validity of the proposed adaptive control scheme is demonstrated by simulation.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.1-6
• /
• 2019

본 연구의 목적은 100kW급 연료전지 시스템의 열관리 성능을 실도로 운전조건에서 분석하여, 성능 해석 모델링을 개발하는 것이다. 개발된 모델을 적용하여, 열관리 시스템의 운전조건 변화에 따른 성능 변화를 고찰하고자 한다. 해석 모델링은 핵심부품들에 대한 성능 평가 데이터를 바탕으로, 성능에 영향을 주는 변수들로 개발하였다. 개발된 연료전지 열관리 시스템 해석 모델링으로 다양한 실차 운전조건에서의 최적 열관리 시스템에 대한 전력소비량을 분석하였다. 주요하게, 연료전지 열관리시스템 핵심부품(워터펌프, 냉각 팬, 3 Way Valve, 라디에이터)에 대한 성능 특성 분석 후 모델링을 진행하였다. 개발된 모델링으로 운전조건에 따른 유량 예측을 하였고, 실험값과 예측값과의 비교분석을 통하여서, 해석 모델링에 대한 검증을 진행하였다. 과도해석을 통하여서, 냉시동시 냉각수 온도가 특정온도까지의 소요시간을 예측하였다. 스택 운전조건에서 스택 입출구 온도가 적정 수준에서 움직이기 위한 열관리 시스템 운전조건에 대한 예측을 진행하였다. 그 결과를 바탕으로, 소모전력과 열방출량과의 비교분석을 하였다. 개발된 해석 모델링은 핵심부품들의 성능 변화시 연료전지 시스템 운전에 대한 영향도를 분석할 수 있도록 활용할 예정이다.