• 보건행정학회지
• /
• 제4권1호
• /
• pp.107-122
• /
• 1994

Many alternatives have been discussed to reduce the medical expenditure and to use the medical resources effectively. Many studies about the economies of scale have been done for the last several decades. This study has analyzed the relationship between the number of beds and the mean expense per hospitalization day in Korea. A Cost Function Model was identified and we wanted to see the minimum optimal size with the cheapest mean expense per hospitalization day. The result is as follows; 1. In the Cost Function Mode, (the number of beds)$^{2}$, the number of personnel, productivity and training institutions are the factors that statisticaly influence the mean expenses. 2. By the univariate analysis the mean expense proved to be the smallest as the level of 150-200bed, The breaked down of the components of expenses shows that the mean labor cost is much different from the mean value of material and administration costs, and that hospital with 150-200 beds also have the minimal expense. The mean expense goes up dramatically in hospitals of 450 beds or more. 3. When the other conditions are constant, according to the multiple regression analysis of the mean expense per adjusted hospitalization day the minimum optimal size with the cheapest expense is a hospital with 191 beds and the hospital with 230 beds takes the lowest mean labor cost. The material or administration costs are not influenced by hospital size. This research has limitation in measuring the variables that influence hospital xpenses, in estimating hospital output by the number of beds in considering outpatient cost and in securing representativeness of hospitals because many hospitals made no responses to the research questionnare. But it is valuable and helpful for development of health policy to figure out the number of beds with the cheapest expense per hospitalization day.

• 대한수학회논문집
• /
• 제29권1호
• /
• pp.205-212
• /
• 2014

This paper investigates mean square exponential dissipativity of singularly perturbed stochastic delay differential equations. The L-operator delay differential inequality and stochastic analysis technique are used to establish sufficient conditions ensuring the mean square exponential dissipativity of singularly perturbed stochastic delay differential equations for sufficiently small ${\varepsilon}$ > 0. An example is presented to illustrate the efficiency of the obtained results.

• 한국조경학회지
• /
• 제23권4호
• /
• pp.12-19
• /
• 1996

Urban parks, as remnant patches, of two older cities and two new towns can be analyzed by a landscape ecological approach. The index of patch shape, the dispersion of patches, the mean edge length, and the mean patch size of parks of each city are ocmpared. The findings of this study are as follows : 1) The mean edge length of urban parks of older cities is longer than that of new towns : Seoul>Suwon>Bundang>Ansan. 2) The mean patch size of urban parks in Seoul is much greater than those of other cities : Seoul> Ansan>Suwon>Bundang. 3) The index of patch shape of urban parks of older cities is greater than that of new towns : Seoul>Suwon>BundangAnsan. 4) The dispersion of patches is in the order of Bundang >Ansan>Seoul>Suwon. The new towns have relatively even distributions of urban parks than older cities. Further research is required to find out the relationship between the index of patch shape and patch interior dynamics.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.165-172
• /
• 2017

Machines are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. Under the process mean shift, production cost, failure cost and quality loss function cost are increasing continuously. Therefore a periodic preventive resetting the process is necessary. We suppose that the wear level is observable. In this case, process mean shift problem has similar characteristics to the maintenance policy model. In the previous studies, process mean shift problem has been studied in several fields such as 'Tool wear limit', 'Canning Process' and 'Quality Loss Function' separately or partially integrated form. This paper proposes an integrated cost model which involves production cost by the material, failure cost by the nonconforming items, quality loss function cost by the deviation between the quality characteristics from the target value and resetting the process cost. We expand this process mean shift problem a little more by dealing the process variance as a function, not a constant value. We suggested a multiplier function model to the process variance according to the analysis result with practical data. We adopted two-side specification to our model. The initial process mean is generally set somewhat above the lower specification. The objective function is total integrated costs per unit wear and independent variables are wear limit and initial setting process mean. The optimum is derived from numerical analysis because the integral form of the objective function is not possible. A numerical example is presented.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.101-110
• /
• 1998

The mean residual life function is the expected remaining life of an item at age $\chi$. The problem of trend change in the mean residual life is great interest in the reliability and survival analysis. In this paper we develop a new test statistic for testing whether or not the mean residual life changes its trend based on a complete sample. Monte Carlo simulations are conducted to compare the perfor mance of our test statistic with that of previously known tests.

• 대한한방내과학회지
• /
• 제28권3호
• /
• pp.560-569
• /
• 2007

Objectives : Ryodoraku is a physiological function test using electric current, and is closely related to skin sympathetic tone. Pulse analysis is known to reflect cardiovascular reactivity. There has been no report on the correlation between ryodoraku and pulse analysis in respiratory diseases. The present study examined the diagnostic values of ryodoraku and pulse analysis for respiratory disease patients Methods : For this study, we conducted ryodoraku and pulse analysis in 103 people including 79 respiratory disease outpatients who visited the $5^{th}$ Internal Department of the Oriental Medicine Hospital of Kyung Hee University during the period from January 1, 2003 to July 25, 2006, and 24 volunteers who did not have any respiratory symptoms or disease history. The respiratory disease patients were divided into five sub-groups according to their symptom: cough-sputum group, wheezing-dyspnea group ' nasal symptoms group. cold-prone group, and fatigue prone group. We compared the disease groups with the control group in six items as follows : mean ryodoraku, mean H1, mean elastic index, the percentage of those with mean ryodoraku below $40{\mu}A$, the percentage of those with HI beyond the physiological range, and the ratio of left : right of elastic index Results and Conclusions : Ryodoraku and pulse analysis were found to have a high value as quantitative diagnosis tools reflecting individuals' weakness and firmness. The results of this research suggest that ryodoraku and pulse analysis have value as tools for diagnosing respiratory diseases.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.658-665
• /
• 1998

This paper investigates local exhaust effectiveness in a room with a supply and an exhaust slots on the ceiling. The mean age of air is an indicator of supply effectiveness, while the mean residual life time can be used as an indicator of exhaust effectiveness. The distribution of local mean residual life time in a space is calculated by four different numerical procedures. The reverse-flow calculation method has been proved to show quite accurate results while it can save considerable amount of computation time and efforts, compared to the method by its original definition. It is concluded that the diffusion term in the equation of mean residual life time can be neglected. The spatial and temporal diffusion characteristics of the contaminant are also discussed.

• 한국지진공학회논문집
• /
• 제20권6호
• /
• pp.369-378
• /
• 2016

The design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. The horizontal spectrum is defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement.

• 한국농공학회지
• /
• 제41권4호
• /
• pp.25-29
• /
• 1999

This study was conducted to derive optimal design floods by Gerneralized Extreme Value(GEV) and Weibull-3 distributions for the annual maximum series at ten watersheds along Han,Nagdong, Geum, Yeongsan and Seomjin reiver systems. Adequency for the analysis of flood data used in this study was established by the tests of Independence. Homogeneity , detection of Outlines, L-moments. Design flood sobtaine dby /methods of Moments and L-Moments using different methods for plotting positions in BEV and Weibull-3 distributions were compared by the Relative Mean Errors(RME) and Root MEan Square Errors(RMSE). The result wa found that design floods derived by the L-moments using the other formulas for plotting positions from the viewpoint of Relative Mean Errors and Root Mean Square Errors.

• 한국물환경학회지
• /
• 제26권2호
• /
• pp.297-302
• /
• 2010

It is very important to know mean and confidence interval of water-quality constituents such as BOD for water-quality control and management of rivers and reservoirs effectively. The mean and confidence interval of BOD at Anseong2 and Hwangguji3 sampling stations which are located at the border of local governments in Anseong Stream were estimated and analyzed in this paper using Bootstrap technique which is one of non-parametric statistics. The results of Bootstrap were compared with arithmetic mean, geometric mean, Biweight method mean as a point estimator and distribution mean came from the appropriate probability distribution of Log-normal. In Bootstrap technique 12 data set was randomly selected in each year and 1000 samples was produced to get parameter of population. Visual Basic for Applications (VBA) of Microsoft Excel was utilized in Bootstrap. It was revealed that the Bootstrap technique can be used to explain more rigorously and robustly the achievement or violation of BOD target concentration in Total Maximum Daily Load (TMDL).