• 한국전산구조공학회논문집
• /
• 제23권5호
• /
• pp.525-533
• /
• 2010

Newmark방법과 같은 직접시간적분법은 시간증분 구간 사이에서 하중이 변하더라도 하중값을 그 시간 구간에서 일정한 하중으로 사용하기 때문에 일정진폭하중과 같은 연속적인 하중함수를 불연속적인 하중함수로 가정하고 수치계산을 수행한다. 따라서 이러한 하중함수의 근사에 따른 오차로 인하여 정확한 수치결과를 계산할 수 없다. 이에 반해, Gurtin의 변분식 에 기초한 유한요소방정식은 하중함수를 시간이력에 대하여 합성적분하여 계산한다. 따라서 시간증분 구간에서 하중이 변하더라도 연속적인 하중함수의 곡선을 따라 가면서 계산하기 때문에 신뢰할 수 있는 수치결과를 구할 수 있다. 본 논문에서는 1차원 막대의 자유단에서 일정진폭하중을 받는 문제를 수치해석하여 Gurtin방법이 Newmark방법 보다 일정진폭하중을 받는 문제에 더 적합한 방법임을 보인다. 또한, Gurtin방법이 일정한 하중을 받는 문제보다 일정진폭하중을 받는 문제에 더 효과적인 방법임을 보인다. Gurtin방법을 FORTRAN으로 프로그래밍하여 해석한 수치결과와 해석용 소프트웨어인 ADINA의 Newmark방법에 의한 수치결과를 비교하여 제시된 수치해의 정확성과 타당성을 검증한다.

• 지구물리와물리탐사
• /
• 제11권2호
• /
• pp.116-126
• /
• 2008

가스 하이드레이트의 탐사에서 탄성파 진폭과 주파수 특성은 가스 하이드레이트의 부존 여부에 대한 매우 중요한 판단 근거이다. 본 연구에서 탄성파 진폭특성은 탄성파 수치모델링 기법을 이용하여 음원 주파수 및 산란체의 크기에 따른 변화 양상을 파악하고자 하였다. 일반적으로 진폭에 큰 영향을 미치는 산란은 음원의 주파수 제곱에 비례하고 산란 이상체의 체적에 비례한다. 음원의 주파수가 높아질수록 가스 하이드레이트 지층에서의 산란이 심하여 BSR이 잘 나타나지 않는 반면 음원의 주파수가 낮아질수록 가스 하이드레이트 지층의 진폭공백대 특성이 잘 나타나고 또한 하부의 BSR이 보다 뚜렷히 보이나 해상도가 낮아지게 된다. 가스 하이드레이트 지층 하부의 Free-Gas층을 통과한 반사파는 고주파수 성분이 감쇠되어 저주파수 성분이 우세해지고, Free-Gas로 인하여 나타나는 BSR의 진폭은 극성역전현상이 발생되며 이것은 가스 하이드레이트 지층의 존재와 분포를 판단하는 중요한 인자가 된다. 탄성파 주파수 특성 분석은 Wavelet Transform을 이용하여 시간에 따른 탄성파동의 주파수 변화를 관찰하는 방법을 사용하였다. 탄성파 모형 실험 자료에 대하여 적용한 결과 Free-Gas층에 대비되는 공기층을 통과하여 반사된 탄성파의 주파수는 고주파수 성분이 상당히 감쇠되었음을 관찰할 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.140-146
• /
• 2003

In this paper, the design of a channel filter and its group-delay-and-amplitude equalizer is carried out for the Ka-band satellite transponder subsystem. The 8th order dual-mode filter is employed for high selectivity around the band-edges with an elliptic-integral function response and has an in-line configuration. The 2-pole, reflection-type, group-delay equalizer is designed and manufactured to reduce the group-delay and amplitude variation, which can be large for such a high order filter. It is noted that in both the filter and equalizer, adopting the dual-mode coupling mechanism leads to less mass and volume. Through measurement, the performance of the realized group-delay-equalized filter is shown to meet the equipment requirements and to be appropriate for the satellite input multiplexer.

• 대한산업공학회지
• /
• 제7권2호
• /
• pp.3-17
• /
• 1981

Isometric muscle strength has become important as it is realized that a large variation in the human exists and is affected by many personal and environmental factors. Experiments have been performed for estimating the individual capabilities of the quadriceps femoris muscle in man. The surface EMG has been recorded on the belly of the rectus femoris muscle during voluntary isometric continuous exertion at 25%, 50%, 75%, and 100% MVC. As a muscle force (% MVC) increases, the rectified mean EMG amplitude increases in a non-linear form. The rectified mean EMG amplitude also increases in a non-linear with respect to fatigue progression. As the muscle force (% MVC) increases, an endurance time of isometric exertion decreases linearly. Analysis shows that rectified mean EMG amplitude is a consistent and sensitive measure of motor unit recruitments and can be useful in estimating an individual capability of a local muscle. Further, the result satisfies the sufficient condition that type S motor units are recruited first, while large motor units are recruited progressively as the fatigue develops.

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.42-46
• /
• 2007

This paper presents a linear amplitude equalizer developed to secure the linearity of the slope of the amplitude over the frequency band ranging $2\sim18\;GHz$. The circuit model is featured by the resistor placed between each pair of a transmission-line and a stub. The design includes finding the values of resistors and stubs to have the optimal linear slope and return loss performances. The measured data show the acceptable performances of the slope variation and return loss over $2\sim18\;GHz$.

• 소음진동
• /
• 제7권6호
• /
• pp.1039-1048
• /
• 1997

This paper describes the effects of dual dynamic vibration absorbers attached to a primary vibration system with damping. The efficiency of dual dynamic vibration absorbers was investigated with the height of amplitude ratio at the resonance frequency ratio of the damped vibration system according to mass ratio, natural frequency ratio and damping ratio. The variation of amplitude ratio related to frequency ratio of primary vibration system is verified experimentally and theoretically according to dual dynamic vibration systems using computer program designed to find mutual relationship between two absorbers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.898-901
• /
• 2000

In this paper, the theoretical tool displacement and surface roughness are analyzed based on the tool locus of a 2-dimensional tool vibrator. At first, the effects assuming no structural deformation of such variables as frequency, amplitude and phase difference that determine tool loci are simulated. The results show that larger amplitude and/or higher frequency makes better surface. However, a real tool vibrator has the structural deformation, much or less, depending on the excitation frequency. Applying FEM analysis to the deformation of a designed 2D tool vibrator according to the excitation, it has been proved that in this case the displacement is 5${\mu}{\textrm}{m}$ at 1KHz and almost 0 at 20KHz even under the same excitation amplitude.

• 소음진동
• /
• 제5권2호
• /
• pp.257-264
• /
• 1995

We designed the cutter profile for symmetric screw rotor and did vibration experiment of screw rotor manufactured by the designed cutter profile. The results of this study are summarized as follows. (1) We designed the cutter profile of screw rotor (4-6)(5-6) by using numerical analysis program. (2) The maximum amplitude and variation of amplitude of 5-6 profile rotor are about 30 - 36.7% and 10 - 25% smaller than those of 4-6 profile rotor, respectively. (3) As the angular velocity of rotor changes from 100 to 300 rpm, the vibration of X, Y axis in driving shaft of 5-6 profile rotor is about 10 - 20% smaller than that of 4-6 profile rotor.

• ETRI Journal
• /
• 제28권2호
• /
• pp.231-234
• /
• 2006

The cancellation performance of a linearization loop is limited by the degree of an amplitude imbalance and a phase imbalance. A delay mismatch causes a phase variation as a function of frequency. Therefore, the cancellation performance and linearization bandwidth are limited by a delay mismatch. The expression for the effects of an amplitude imbalance, a phase imbalance, and a delay mismatch on the characteristics of a linearization loop is derived and analyzed. The simulation results are compared with the results obtained by means of using a commercial simulation tool and the exact agreement is reported. The derived equation could be used in designing a linearization loop and predicting the cancellation performance of the linearization loop usefully. Some useful characteristics, known from the simulation results obtained by using the derived equation, of a linearization loop for designing and implementing feedforward amplifiers are described in detail.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.113-124
• /
• 2018

In the present paper, we have considered a layered medium of two semi-infinite nonlocal elastic solids with intermediate transversely isotropic magnetothermoelastic solid. The intermediate slab is of uniform thickness with the effects of two temperature, rotation and Hall current and with and without energy dissipation. A plane longitudinal or transverse wave propagating through one of the nonlocal elastic solid half spaces, is made incident upon transversely isotropic slab and it results into various reflected and refracted waves. The amplitude ratios of various reflected and refracted waves are obtained by using appropriate boundary conditions. The effect of nonlocal parameter on the variation of various amplitude ratios with angle of incidence are depicted graphically. Some cases of interest are also deduced.