• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1210-1216
• /
• 2014

This paper deals with an application of Teager Energy Operator (TEO) and Energy Separation Algorithm(ESA) to detect and determine various voltage waveform distortions like harmonics, inter-harmonics and frequency variation. Because the TEO and DESA algorithm was initially proposed for speech or communication analysis, its applications are limited to some types of waveform in the power quality analysis area. For example, an undistorted voltage signal is similar with a pure sinusoid. A voltage fluctuation is very similar with an amplitude-modulated signal, from the viewpoint of signal theory. And a continuous frequency variation is similar with a frequency-modulated signal, which is also known as a chirp signal. This paper is written to show that the TEO and DESA algorithm can be used for detecting occurrences of the representative waveform distortions and determining their instantaneous information of amplitude and frequency.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.194-195
• /
• 2010

This paper investigates control algorithms for a doubly fed induction generator (DFIG) with back-to-back converter in medium-voltage wind power system under unbalanced grid conditions. Operation of DFIG under unbalanced grid conditions causes several problems such as overcurrent, unbalanced currents, active power pulsation and torque pulsation. Three different control algorithms to compensate for the unbalanced conditions have been investigated with respect to four performance factors; fault ride-through capability, efficiency, harmonic distortions and torque pulsation. The control algorithm having zero amplitude of negative sequence current shows the most cost-effective performance concerning fault ride-through capability and efficiency. The control algorithm for nullifying the oscillating component of the instantaneous active power generates least harmonic distortions. Combination of these two control algorithms depending on the operating requirements presents most optimized performance factors under the generalized unbalanced operating conditions.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.387-388
• /
• 1996

The principles to attain improved accuracy in a new controller for large CCD and mosaics detectors with the application of 16- and 32-bit DSP are presented.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.1
• /
• pp.28-34
• /
• 2003

In this paper, a predistortion linearizer using series diode is proposed for linearizing the power amplifier in microwave radio systems. The power amplifier should be operated near saturation region to achieve high efficiency. But at this region, amplitude and phase distortions of the amplifier remarkably increase with the increase of input power and cause a significant adjacent channel interference. The linearizer is composed of a series diode with a parallel capacitor, which provides positive amplitude and negative phase deviations with the increasing input power. This type of linearizer using the nonlinearity of diode has improved the C/I(Carrier to Intermodulation Distortion) ratio well. By applying this linearizer to two-tone 880MHz power amplifier, adjacent channel leakage power is improved up to 5dBm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.793-798
• /
• 2009

In this paper, the simulation and optimization of SRH (Surface Relief Hologram) masks for printing LCD gate patterns using TIR (Total Internal Reflection) holographic lithography was investigated. A simulation and optimization algorithm based on SDTA (Scalar Diffraction Theory Analysis) method was developed. The accuracy of the algorithm was compared to that of the RCWA (Rigorous Coupled Wave Analysis) method for estimating the Fresnel diffraction pattern of Cr amplitude masks for the given system geometry. In addition, the results from the optimization algorithm were validated experimentally. It was found that one to the most important conditions for the fabrication of SRH masks is to avoid nonlinear shape distortions of the resulting grating. These distortions can be avoided by designing SRH masks with recorded gratings having small aspect ratios of width versus depth. The optimum gap size between the Cr and SRH masks was found using the optimization algorithm. A printed LCD gate pattern with a minimum line width of $1.5{\mu}m$ exposed using the optimized SRH mask was experimentally demonstrated.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.2
• /
• pp.93-98
• /
• 2012

A precise measurement of the grid voltage is one of the essential techniques, which is required to connect a renewable energy to the grid. In general, when a filter is used to eliminate unnecessary harmonics and noises, a signal is distorted by phase delay, amplitude attenuation, and other distortions. And the response characteristic of a controller is directly affected by bandwidth of cut-off frequency of the filter. To alleviate this problems, we propose an effective algorithm based on DFT(Discrete Fourier Transform) instead of approaching the filter application. The proposed algorithm ensures high precise measurement of the grid voltage because it can extract the fundamental and harmonics from the raw signal without any distortions. The high performance of the proposed algorithm is verified by PSIM simulation and experiments of Grid-Connected VSI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.328-336
• /
• 2006

A novel pre-equalization method for terrestrial DTV transmitters is presented. A pre-equalizer has been used in transmitters to correct group delay and amplitude distortions caused by a channel filter. In the proposed pre-equalizer, an equation-error adaptive IIR filtering scheme is adopted unlike the conventional pre-equalization using FIR filtering schemes. The pole-zero modelling property of IIR filters improves the signal-to-noise ratio and may deal with diverse linear distortions existing in DTV transmitters as well as the channel filter distortion. Simulation results show that the proposed IIR pre-equalizer performs better than the FIR pre-equalizer in terms of the residual mean-square error.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1830-1843
• /
• 2018

In this paper, the generation of a reference current and voltage signal based on a Kalman filter is offered for a 3-phase 4wire UPQC (Unified Power Quality Conditioner). The performance of the UPQC is improved with source voltages that are distorted due to harmonic components. Despite harmonic and frequency variations, the Kalman filter is capable enough to determine the amplitude and the phase angle of load currents and source voltages. The calculation of the first state is sufficient to identify the fundamental components of the current, voltage and angle. Therefore, the Kalman state estimator is fast and simple. A Kalman based control strategy is proposed and implemented for a UPQC in a distribution system. The performance of the proposed control strategy is assessed for all possible source conditions with varying nonlinear and linear loads. The functioning of the proposed control algorithm with a UPQC is scrutinized and validated through simulations employing MATLAB/Simulink software. Using a FPGA SPATRAN 3A DSP board, the proposed algorithm is developed and implemented. A small-scale laboratory prototype is built to verify the simulation results. The stated control scheme for the UPQC reduces the following issues, voltage sags, voltage swells, harmonic distortions (voltage and current), unbalanced supply voltage and unbalanced power factor under dynamic and steady-state operating conditions.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.3
• /
• pp.221-230
• /
• 2010

A 4+12+16 amplitude phase shift keying (APSK) modulation outperforms other 32-APSK modulations in a nonlinear additive white Gaussian noise (AWGN) channel because of its intrinsic robustness against AM/AM and AM/PM distortions caused by the nonlinear characteristics of a high-power amplifier. Thus, this modulation scheme has been adopted in the digital video broadcasting-satellite2 European standard. And it has been considered for high rate transmission of telemetry data on deep space communications in consultative committee for space data systems which provides a forum for discussion of common problems in the development and operation of space data systems. In this paper, we present an improved bits-to-symbol mapping scheme with a better bit error rate for a 4+12+16 APSK signal in a nonlinear AWGN channel and propose a simple signal detection algorithm for the 4+12+16 APSK from the presented bit mapping.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.307-318
• /
• 1994

Existence of any nonlinearity in responses of a nonlinear system is tested using a kurtosis or a fourth moment which has been widely used to characterize signal patterns. By inputting a harmonic signal to a system and investigating the distortions of an output signal from a harmonic pattern, which are due to violations of proportionality between the input and the output, it is judged whether the output is generated from a nonlinear system or not. Through applying the method presented in this work to simulation studies on detections of nonlinearities of a single degree of freedom system, in which three kinds of nonlinearities are treated as restoring force terms, feasibilities of the method are shown and the range of both frequency and input amplitude, in which the system generates nonlinear responses, is determined.