• 한국균학회지
• /
• 제10권4호
• /
• pp.213-216
• /
• 1982

To find antitumor components with low toxicity in natural products of Korean Basidiomycete, the carpophores of Flammulina velutipes (Fr.) Sing. were extracted with hot water for eight hours. The extract was purified by dialyzing through Visking tube and a protein-bound polysaccharide fraction was obtained as pale brownish amorphous powder after it was freeze-dried. The fraction was examined for antitumor activity against sarcoma 180 implanted subcutaneously in the left groins of I.C.R. mice. The inhibition ratio of this fraction of against the tumor was 62.3% at the dose of 10 mg/kg/day for the period of ten days. The tumors in three of the ten treated mice were completely regressed.

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.111-116
• /
• 1988

Aluminum hydrates were prepared by precipitation method using Al2(SO4)3$.$18H2O as a starting material and NH4OH as precipitation agent. The phases of aluminum hydrate were changed from amorphous aluminum hydrate to pseudo-boehmite of AlOOH form and bayerite, gibbsite, hydragillite and norstrandite of Al(OH)3 form with increasing pH. As pH increased, agglomeration phenomena were reduced. Aluminum hydrates of AlOOH and Al(OH)3 form represented dehydration of structural water near 175$^{\circ}C$ and 385$^{\circ}C$, and 280$^{\circ}C$, respectively. As the ratio of Al(OH)3 to AlOOH increased, specific surface area was reduced.

• 한국세라믹학회지
• /
• 제29권2호
• /
• pp.119-126
• /
• 1992

3 mol% Y2O3-doped ZrO2 powders were prepared by hydrolysis with 0.1, 0.2, 0.3, 0.4, 0.5, 0.6 mol/ιH2O/ethanol into 0.1 mol/ι zirconium and yttrium alkoside/ethanol. Spherical monodispersed yttria-partially stabilized zirconia particles with an average diameter of about 0.5 ${\mu}{\textrm}{m}$ were prepared by hydrolysis with 0.2 mol/ιH2O/ethanol. The as-prepared powder was amorphous and with heating it transformed into cubic up to 80$0^{\circ}C$ and into tetragonal over 100$0^{\circ}C$. 3 mol% Y2O3-doped ZrO2 powders calcined over and up to 80$0^{\circ}C$ were a mixture of tetragonal and monoclinic and only tetragonal as determined by X-ray diffraction, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.946-949
• /
• 2000

Amorphous MnO$_2$$.$ nH$_2$O in 1M KOH aqueous electrolyte proves to be an excellent electrode for a faradic electrochemical capacitor cycled between -0.5 and +1.0 versus Ag/AgCl. In order to observe morphology and crystalline structure of MnO$_2$powder, we analyzed it by XRD and SEM. The effect of oxidation treatment on MnO$_2$electrode was observed by different oxidation voltages. A maximum capacitance of 364F/g was obtained by 1.1V oxidation treatment. This capacitance was attributed solely to a surface redox mechanism

• Bulletin of the Korean Chemical Society
• /
• 제14권6호
• /
• pp.708-712
• /
• 1993

The Polymerization of p-chlorophenyl propargyl ether (CPE) was carried out using various transition metal catalysts. The catalytic activity of $MoCl_{5}$-based catalysts was greater than that of $WCl_6$-based catalysts. $MoCl_5$ alone and $MoCl_{5}$-cocatalyst systems polymerized CPE very effectively to give a high yield of poly(CPE). In most cases, the polymer yield was quantitative and the average molecular weight $({\bar{M}}n)$ was in the range of 9,000 and 17,000. The NMR, IR, UV-visible spectra indicated that the present poly(CPE) has a linear conjugated polyene structure having p-chlorophenyl oxymethylene substituent. The poly(CPE) was mostly dark-brown colored powder and was completely soluble in various organic solvents such as chloroform, methylene chloride, THF, chlorobenzene, etc. The X-ray diffraction analysis indicated that the present poly(CPE) is amorphous.

• 전기화학회지
• /
• 제3권2호
• /
• pp.85-89
• /
• 2000

Lithium ion Battery(LIB)의 음극 활물질로써 리튬을 대체하기 위한 노력으로 phenol resin을 탄화시킨 탄소재료를 사용하였다. Phenol resin을 소성하면 축합반응을 일으키면서 탄화되어 무정형 탄소가 된다. 무정형 탄소는 층간거리가 넓어 리튬의 삽입과 탈리가 용이하지만 탄소간의 결합력이 약하여 구조적 붕괴가 일어난다. 이러한 문제를 해결하기 위해 세공형성제로서 $ZnCl_2$를 사용하였다. $ZnCl_2$는 생성된 물질에서 3차원적 망상구조로 성장하는 개방세공을 형성하는 세공형성제로서 뿐만 아니라, 벌크 첨가제가 도핑된 느슨한 구조를 형성하는 미세세공 형성제로서 작용하였다. SEM을 통해서 구조적 차이를 알 수 있었으며, XRD분석으로 층간의 거리를 알 수 있었다. CV측정을 통해 두 가지 샘플에 대한 산화와 환원 반응의 차이를 알아보았다.

• 한국세라믹학회지
• /
• 제42권9호
• /
• pp.618-623
• /
• 2005

HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.313-319
• /
• 2017

일반적으로 플라이애시의 입도, 화학성분, 비정질양, 비정질 Si, Al 양등 매우 다양한 요인이 시멘트와의 반응에 영향을 미치고 있다. 본 연구에서는 플라이애시의 입자 특성이 압축강도에 미치는 영향을 확인하고자 한다. 표준사를 플라이애시와 유사한 입도로 분쇄하여 플라이애시와 동일하게 시멘트와 배합하여 압축강도를 측정하였다. 측정된 압축강도 결과 값을 사용하여 시멘트 수화반응에 의한 강도와 입자 충진 효과에 의한 강도 증진을 확인하였다. 표준사 분말을 치환한 모르타르의 압축강도 결과를 활용하여 플라이애시의 포졸란 반응에 의한 강도 증가분을 계산하였다. 이러한 결과 값과 플라이애시의 입자 특성을 비교한 결과, 분말도는 압축강도와 약한 상관성을 보이고 있으며, PI(Pozzolanic Index)는 10% 통과직경(D10)과 50% 통과직경(D50)과 좋은 상관관계를 나타내었다. 따라서 향후 PI와 D10과의 상관성은 플라이애시의 화학적 특성과 함께 플라이애시 특성을 파악하는 좋은 수단이 될 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.306-314
• /
• 2005

In this study, spherical $pre-BaTiO_3$ particles are prepared by gelation and aging process in autoclave without catalysts. The (Ba-Ti) gel used as a starting material was prepared by aging mixtures of titanyl acylate with barium acetate aqueous solution([glacial acetic acid (AcOH)]/[titanium isopropoxide (TIP)] 4, [barium acetate]/[TIP] 1) at $45^{\circ}C$ for 48hrs. XRD and SEM results for the (Ba-Ti) gel sample at aging process showed that the gel was formed via aggregation of the fine particles. It seems to be the primary particles of bulk (Ba-Ti) gel amorphous, but the spatial arrangement of barium and titanium in the (Ba-Ti) gel is similar to that in crystalline $BaTiO_3$ particles. From XRD and FT-IR. spectroscopy analysis it was found that the crystal structure of the prepared particles continuously transformed from amorphous to tetragonal as the calcination temperature increased, and crystallized spherical cubic and tetragonal $BaTiO_3$ powder obtained at the very low calcination temperature between $500^{\circ}C$ and $900^{\circ}C$ after 1hrs of heat treatment respectively. According to BET analysis result, final particle have pore structure of ink bottle shape which is produced by aggregation of fine spherical particles with surface area of $280m^2/g$ and average pore size of 130nm.

• 한국자기학회지
• /
• 제13권6호
• /
• pp.221-225
• /
• 2003

통상적인 rf 스파터 장비와 YIG 타켓으로 수 $\mu\textrm{m}$의 Fe-Y-O 비정질상을 Ga-Gd Garnet(GGG) (111) 기판위에 만든 다음 550-105$0^{\circ}C$의 온도에서 대기 중 열처리할 때 열처리온도가 결정특성과 자기특성에 미치는 영향을 조사하였다 .Fe-Y-O 비정질상의 결정화온도는 졸-겔 분말의 결정화온도보다 훨씬 낮은 600-$650^{\circ}C$이었으며, $650^{\circ}C$ 이상에서 열처리하면 YIG(888)면의 피크의 강도는 GGG(888) 면 회절강도의 80%정도이고 YIG(888)면의 록킹곡선의 반가폭도 0.14$^{\circ}$보다 작아 YIG박막의 우수한 에피택시성장을 확인하였다. 열처리온도가 높을 경우 격자상수가 작아지면서 YIG(888)면의 회절선이 강해지고 좁아져서 높은 온도가 YIG박막의 고상에피택시성장에 유리하였으며 이것은 자화곡선에서도 확인되었다. 또한 높은 온도에서 열처리된 박막에서 수직이방성이 유도되었으며 이것은 기판과 박막의 0.15%의 격자불일치 때문에 생기는 것이다.