• Title/Summary/Keyword: ammonia solution

Search Result 365, Processing Time 0.026 seconds

Hydrolysis Rate Study of Chelated Ti Alkoxide by Using U.V. Spectrophotometer (자외선 흡수대를 이용한 Chelated Ti Alkoxide의 수화반응 연구)

  • 김선욱;윤만순;송인호
    • Journal of the Korean Ceramic Society
    • /
    • v.28 no.12
    • /
    • pp.975-980
    • /
    • 1991
  • Chelated titanium alkoxides are hydrolysed showly and stable enough to prepare multicomponent gels of titania without its precipitation due to the fast hydrolysis of Ti alkoxide. The alkoxy groups of chelated titanium alkoxide are hydrolysed as fast as that of titanium alkoxide but the chelating groups are stable even in aqueous solution. The chelating groups showed different rates of hydrolysis in aqueous ammonia solution and water added one. Those rates were monitored with UV-VIS spectrophotometer by using their unique absorption bands before and after hydrolysis.

  • PDF

Study on the Alumina Extraction from Kaolin (고령토로부터 알루미나 추출에 관한 연구)

  • 맹중재;김철주;신병식
    • Journal of the Korean Ceramic Society
    • /
    • v.17 no.1
    • /
    • pp.35-41
    • /
    • 1980
  • Alumina extraction from raw Hadong kaolin with sulfuric acid was studied to obtain relatively pure alumina. Factors as acid concentration, heating temperature and conditions of ammonium alum crystal formation from extracted solution are also surveyed and most of iron oxide in kaolin is eliminated in crystallization of ammonium alum. Pure crystal obtained from the extracted solution with ammonium sulfate is relatively free from iron containment in mother liquor. Alumina in ammonium alum crystal is converted to gibbsite form after complete hydrolysis in ammonia gas.

  • PDF

Absorption Rate of Carbon Dioxide into Blended Ammonia Solution with Amine Additives in a Stirred Cell Reactor (교반셀에서 측정한 아민첨가 암모니아수 흡수제의 이산화탄소 흡수 반응 속도 측정)

  • Park, HoSeok;You, Jong Kyun;Hong, Won Hi;Kim, Jong Nam
    • Korean Chemical Engineering Research
    • /
    • v.47 no.2
    • /
    • pp.185-189
    • /
    • 2009
  • Absorption rate of carbon dioxide into aqueous ammonia absorbent(10 wt%) was measured in the temperature range from 293 K to 337 K using a stirred-cell reactor. The reaction rate constant was correlated with the Arrehnius equation and the activation energy was 50.42 kJ/mol. $CO_2$ absorption rate into modified ammonia absorbent was also investigated. For the modified ammonia absorbent, 1 wt% sterically hindered amines of 2-amino-2-methyl-1-propanol(AMP), 2-amino-2-methyl-1,3-propandiol(AMPD) and 2-amino-2-ethyl-1,3-propandiol(AEPD) were used as additives. The $CO_2$ absorption rate increased by adding 1 wt% of the amine additive, in the case of AMP additive, the absorption rate enhanced by about 53%.

Liquefaction Characteristics in Supercritical Decomposition and Extraction of Used Automotive Tire (초임계유체에 의한 폐타이어 분해와 추출에서 오일화의 특성)

  • Kang, W.S.;Kim, J.K.;Kim, I.S.;Park, P.W.
    • Elastomers and Composites
    • /
    • v.34 no.4
    • /
    • pp.350-359
    • /
    • 1999
  • Conversion and oil-yield of a used automotive tire sample in supercritical decomposition and extraction for three solvents such as water, 28% ammoina solution and ammonia, were compared. Supercritical extraction with ammonia gave the highest conversion and oil-yield at the same temperature and pressure. In this paper, supercritical ammonia was used as major solvent and tetralin acting as hydrogen-donor, was used as cosolvent. As the amount of tetralin increased, oil-yield was Increased. When a tire sample was extracted by supercritical ammonia, oil-yield was 48.8% at $280^{\circ}C$, 22.3MPa. But when the weight ratio of tetralin to tire sample (weight of tetralin/weight of tire sample) was 5, oil-yield was 61.2% at $280^{\circ}C$ and 22.3 MPa. These phenomena indicate that as radicals produced in supercritical decomposition become stable, the polymerization and the second decomposition of products may be inhibited. Supercritical extraction of a tire sample swollen by tetralin gave high oil-yield although the amount of tetralin was a little.

  • PDF

The Efficiency of Fe Removal Rate from Gold Ore in the Oxidation Zone by Ammonia Leaching (암모니아 용출에 의한 산화대 금 광석으로부터 Fe 제거 효율에 관한 연구)

  • Kim, Bong-Ju;Cho, Kang-Hee;Choi, Nag-Choul;Park, Cheon-Young
    • Journal of the Mineralogical Society of Korea
    • /
    • v.29 no.3
    • /
    • pp.113-122
    • /
    • 2016
  • This study aims to improve the recovery of gold and silver by removing hematite from gold ore of an oxidation zone with ammonia solution. Quartz, hematite and muscovite were present in the oxidation zone, while hematite was hydrogenous. As a result of performing an ammonia leaching test on variables, it is found that the maximum Fe leaching parameter was $-45{\mu}m$ particle size, 1.0 M sulfuric acid concentration, 5.0 g/l ammonium sulfate concentration and 2.0 M hydrogen peroxide concentration. It is also confirmed that goethite was precipitated and formed from that ammonia elution. As the amount of Fe-removal was increased in a solid-residue, the recovery of Au and Ag were increased, too.

EFFECTS OF UREA NITROGEN ON THE METABOLISM OF PLANTS (1) Studies on Nitrogen Absorption and Metabolism in Sunflower Leavessprayed with Urea Solution

  • KIM, Joon Ho
    • Journal of Plant Biology
    • /
    • v.4 no.2
    • /
    • pp.51-61
    • /
    • 1961
  • In order to detect the way of absorption and metaboism of the urea it is sprayed on the surface of the leaves of sunflower. The sunflowers used in this study are grown in different conditions such that the one in nittogen aboundant and the other in nitrogen deficient soil, respectively. The urea-N, ammonia-N, amide-N, and 80% alcohol soluble-N in the leaves were quantitatively determined. All of the nitrogenous components measured are generally tended to increased with rising the concentration of urea except only amide-N at 24 hours after sprayed, and these were highly significances. It seemed that hydrolizing of urea into ammonia and carbon dixide and the assimilation of ammonia into other organic nitrogenous constituents were rapid in the young leaves than in the mature. It is interest that the amide content, in the young leaves and nitrogen defieient one were enhanced with the increasing concentration of urea, although in the mature leaves it did not show any change in the urea treatment. It is presumed that the assimilation rate of ammonia and the urease activity were lower in the matture leaves than in the young and nitrogen deficient leaves. No significance at 5% level showed all of the nitrogenous components except total nitrogen between nitrogen abundant and deficent leaves. Urea content was a high peak at first 12 hours, ammonia at 48 hours, and amide and alcohol soluble nitrogen at 96 hours, whence decrease4d the content of these constituents gradually. The total nitrogen content is not incrased obviously by only one time of urea spray in this study. When the concentration of urea was relatively high there appeared the wilting spots on t도 edge of leaves. As a whole, it seemed that sprayed urea was rapidly absorbed and taken part in nitrogen metabolism within relatively short period.

  • PDF

Studies on the aqueous ammonia alternatives in the wet scrubbing method (습식 세정법에서 암모니아 대체물질에 관한 연구)

  • Kim, Jae Gang;Lee, Ju-Yeol;Park, Byung Hyun;Choi, Jin Sik
    • Journal of the Korean Applied Science and Technology
    • /
    • v.33 no.1
    • /
    • pp.110-117
    • /
    • 2016
  • In the existing research, the ammonia aqueous solution was used in order to remove the Nitrogen dioxide using the scrubber. However, ammonia is poisonous and stench is extreme. So, the system application follows the difficulty. Experiments were conducted to find a substitute material ammonia. The sodium hydroxide(NaOH), sodium thiosulfate ($Na_2S_2O_3$), and urea were used with the substitute substance. The experimental condition proceeded as the optimum conditions in the existing ammonia use. The experimental result NaOH and $Na_2S_2O_3$ was available. NaOH showed the efficiency which is the highest in 2.5%. And $Na_2S_2O_3$ showed the efficiency which is the highest in 5.0%. The efficiency was not fixed and the urea was inappropriate with the substitute substance.

Effect of Exogenous Sulfur on Hydrogen Peroxide, Ammonia and Proline Synthesis in White Clover (Trifolium repens L.)

  • Baek, Seon-Hye;Muchamad, Muchlas;Lee, Bok-Rye;Kim, Tae-Hwan
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.42 no.3
    • /
    • pp.195-200
    • /
    • 2022
  • Sulfur is an essential element in plants, including amino acids, vitamin synthesis, and acting as an antioxidant. However, the interaction between endogenous sulfur and proline synthesis has not been yet fully documented. White clover (Trifolium repens L.) is known as a species highly sensitive to sulfate supply. Therefore, this study aimed to elucidate the role of sulfur in regulating proline metabolism in relation to ammonia detoxification and hydrogen peroxide (H2O2) accumulation in white clover. The detached leaves of white clover were immersed in solution containing different concentration of sulfate (0, 10, 100, and 1000 mM MgSO4). As MgSO4 concentrations were increased, the concentration of H2O2 increased up to 2.5-fold compared to control, accompanied with H2O2 detection in leaves. Amino acid concentrations significantly increased only at higher levels (100 and 1000 mM MgSO4). No significant difference was observed in protein concentration. Proline and ∆1-pyrroline-5-carboxylate (P5C) concentrations slightly decreased at 10 and 100 mM MgSO4 treatments, whereas it rapidly increased over 1.9-fold at 1000 mM MgSO4 treatment. Ammonia concentrations gradually increased up to 8.6-fold. These results indicate that exogenous sulfur levels are closely related to H2O2 and ammonia synthesis but affect proline biosynthesis only at a higher level.

Biological Nutrient Removal using Porous Media (다공성 담체를 이용한 생물학적 영양물질 제거)

  • Cho, Chang-Sik;Lee, Sang-Houck
    • Journal of Digital Convergence
    • /
    • v.11 no.5
    • /
    • pp.237-243
    • /
    • 2013
  • This study aims to examine the modified $A^2/O$ process is useful to reduce the environmental pollution caused by nutrient in wastewater. Specific results are as follows: The removal rate was evaluated at each time period, ie., 18h, 8h, 6h, and 3h after the reaction started. The anoxic rate was more than 94-97% from 18h to 6h but was less than 50% before 6h. Thus, the test of nitrification was done using 6h as the optimal anoxic retention time and the aerobic retention time set at 24h. When the flow change was 1:1, the average ammonia concentration inputted was $30mg/{\ell}$. Returned top nitric acid solution and the concentration of ammonia solution falling into the anoxic reactor was about 50% of the initial concentration, and the flow change was 1:2, the concentration of ammonia falling into the anoxic reactor was about 62% of that of influxed ammonia. And the results of this study showed that the nitrogen removal rate can be improved by inputting untreated nitric acid and changing the flow of top nitrate solution using the modified $A^2/O$ method.

Operating Characteristics of a Bubble Pump for Diffusion-Absorption Refrigerator (확산형 흡수식 냉동기용 기포펌프의 운전특성에 관한 연구)

  • 이현경;김선창;이재헌
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.13 no.9
    • /
    • pp.878-887
    • /
    • 2001
  • Experimental investigation has been carried out to examine the operating characteristics of a bubble pump for diffusion absorption refrigerator. The effects of heat input and delivery height on generation rate of refrigerant vapor and circulation rate of solution have been investigated. as a result heat input and delivery height increase, circulation rate of solution increases. And the smaller the tube diameter, the larger the circulation rate of solution. Pumping ratio increases to a critical point and then decrease with the increase of heat input, and it increases with the increase in delivery height. In this paper, Marcus's analytical theory was also examined. It was found that the Marcus\`s analytical theory of a bubble pump was not appropriate for a bubble pump using ammonia aqueous solution as a working fluid.

  • PDF