• 한국진공학회지
• /
• 제6권3호
• /
• pp.227-234
• /
• 1997

ITO, AZO, SZO 투명전도박막의 수소 플라즈마에 대한 안정성에 관하여 연구하였 다. ITO는 Corning 사의 제품을 사용하였고, AZO와 SZO는 rf magnetron sputtering 방법 으로 증착한 것을 이용하였다. 이 세가지 투명전도박막을 PECVD 챔버 내에 장착한 다음, 수소 플라즈마에 노출시켰다. 이 때 ITO 박막의 광투과도는 시편 표면의 온도와 시간이 증 가할수록 감소하였는데 특히 $300^{\circ}C$에서 30분간 노출시켰을 때 10~20%정도의 광투과도를 나타내었으며, 박막의 전도성을 완전히 잃어 버렸다. 반면 AZO와 SZO의 경우, 수소 플라즈 마 노출 온도와 시간에 대해 전반적으로 광투과도 손실이 나타나지 않았다. 하지만 박막내 수소의 유입으로 인하여 흡수대가 단파장 쪽으로 이동하는 'Burstein-Moss'효과가 나타났 다. 또한 표면구조에서도 AZO와 SZO가 수소 플라즈마 노출에 대해 안정성을 보인 반면 ITO의 표면은 indium과 tin의 금속입자로의 환원으로 인해 매우 거칠어짐을 보였다.

• 한국진공학회지
• /
• 제17권3호
• /
• pp.199-203
• /
• 2008

$O_2$ 플라즈마를 이용한 표면처리 공정이 Bio-FET (biologically sensitive field-effect transistor)에 미치는 영향을 조사하기 위하여, SOI (Silicon-on-Insulator) wafer와 sSOI (strained- Si-on-Insulator) wafer를 이용하여 pseudo-MOSFET을 제작하고 $O_2$ 플라즈마를 이용하여 표면처리를 진행하였다. 제작된 시료들은 back gated metal contact junction 방식으로 측정되었다. $I_D-V_G$ 특성과 field effect mobility 특성의 관찰을 통하여 $O_2$ 플라즈마 표면처리에 따른 각 시료들의 전기적 특성 변화에 대하여 관찰하였다. 그리고 $O_2$ 플라즈마 표면처리 과정에서 플라즈마에 의한 손상을 받은 시료들은 2% 수소희석가스 ($H_2/N_2$)를 이용한 후속 열처리 공정을 진행한 후 전기적 특성이 향상되는 것을 관찰할 수 있었다. 이는 수소희석가스를 이용한 후속 열처리 공정을 통하여 산화막과 Si 사이의 계면 준위와 산화막 내부의 전하 포획 준위를 감소시켰기 때문이다.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.39-44
• /
• 2011

In this study, we have investigated the structural and electrical characteristics of IZO thin films deposited on flexible substrate for the OLED (organic light emitting diodes) devices. For this purpose, PES was used for flexible substrate and IZO thin films were deposited by RF magnetron sputtering under oxygen ambient gases (Ar, $Ar+O_2$) at room temperature. In order to investigate the influences of the oxygen, the flow rate of oxygen in argon mixing gas has been changed from 0.1sccm to 0.5sccm. All the samples show amorphous structure regardless of flow rate. The electrical resistivity of IZO films increased with increasing flow rate of $O_2$ under $Ar+O_2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO electrodes made by configuration of IZO/a-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current density-voltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.

• 한국진공학회지
• /
• 제20권3호
• /
• pp.200-204
• /
• 2011

이 논문에서는 반도체의 기판으로 사용되는 Si(silicon)기판과 금속배선 물질인 Cu(copper)의 확산을 효과적으로 방지하기 위한 W(Tungsten)-C(Carbon)-N(Nitrogen) 확산방지막을 제시하였고, 시료 증착을 위하여 rf magnetron sputter를 사용하여 동일한 증착조건에서 질소(N)의 비율을 다르게 증착한 후 시료의 열적 안정성 측정을 위하여 상온에서 $800^{\circ}C$까지 각각 질소 분위기에서 30분간 열처리 과정을 실시하여 열적 손상을 인가하였다. 이후 Nanoindentation 기법을 이용하여 총 16 points에서 Elastic modulus와 Weibull distribution을 측정하였다. 그 결과 질화물질이 고온에서 물성변화가 적게 나타나는 것을 알 수 있었고, 온도변화에 따른 박막의 균일도와 결정성 또한 질화물질에서 더 안정적이었다.

• 한국재료학회지
• /
• 제18권10호
• /
• pp.521-528
• /
• 2008

We present the structural, optical, and electrical properties of amorphous silicon suboxide (a-$SiO_x$) films grown on indium tin oxide glass substrates with a radio frequency magnetron technique from a polycrystalline silicon oxide target using ambient Ar. For different substrate-target distances (d = 8 cm and 10 cm), the deposition temperature effects were systematically studied. For d = 8cm, oxygen content in a-$SiO_x$ decreased with dissociation of oxygen onto the silicon oxide matrix; temperature increased due to enlargement of kinetic energy. For d = 10 cm, however, the oxygen content had a minimum between $150^{\circ}\;and\;200^{\circ}$. Using simple optical measurements, we can predict a preferred orientation of liquid crystal molecules on a-$SiO_x$ thin film. At higher oxygen content (x > 1.6), liquid crystal molecules on an inorganic liquid crystal alignment layer of a-$SiO_x$ showed homogeneous alignment; however, in the lower case (x < 1.6), liquid crystals showed homeotropic alignment.

• 한국표면공학회지
• /
• 제51권4호
• /
• pp.231-236
• /
• 2018

We report p-type electrical characteristics of the amorphous $La_2NiO_{4+{\delta}}$ thin films which were sputtered on the glass substrates using an RF sputtering system. As-deposited thin films at room temperature and $300^{\circ}C$ were amorphous in nature. Post-annealing of the thin film samples over $400^{\circ}C$ resulted in the nano-crystallization of the $La_2NiO_{4+{\delta}}$. The electrical properties of the films were much dependent on the oxygen partial pressure, temperature of the post-annealing and sputtering ambient. The as-deposited samples at room temperature show a hole concentration of $7.82{\times}10^{13}cm^{-3}$, and it could be increased as high as $3.51{\times}10^{22}cm^{-3}$ when the films were post-annealed in an oxygen atmosphere at $500^{\circ}C$. Such p-type conductivity behavior of the $La_2NiO_{4+{\delta}}$ films suggests that the amorphous and nano-crystallized $La_2NiO_{4+{\delta}}$ films have potential for the application as p-type semiconductive or conductive materials at low temperatures where material diffusion is limited.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.457-458
• /
• 2009

In this work, transparent conducting Al-doped zinc oxide (AZO) films were prepared on Coming glass substrate by RF magnetron sputtering using an Al-doped ZnO target (Al: 2 wt.%) at room temperature and all films were deposited with athickness of 150 nm. We investigated the effects of the post-annealing temperature and the annealing ambient on structural, electrical and optical properties of AZO films. The films were annealed at temperatures ranging from 300 to $500^{\circ}C$ in steps of $100^{\circ}C$ using rapid thermal annealing equipment in oxygen. The thickness of the film was observed by field emission scanning electron microscopy (FE-SEM) and grain size was calculated from the XRD spectra using the Scherrer equation and their electrical properties were investigated using a hole measurement and the reflectance of AZO films was investigated by UV-VIS spectrometry.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.19-19
• /
• 2009

TiNxOy/TiNx multilayer thin films with a high resistance (~ k$Omega$) were deposited on SiO2/Si substrates at room temperature by sputtering. The TiNx thin films show island and smooth surface morphology in samples prepared by dc and rf magnetron sputtering, respectively. TiNxOy/TiNx multilayer has been developed to control temperature coefficient of resistance (TCR) by the incorporation of TiNx layer (positive TCR) inserted into TiNxOy layers(negative TCR). Electrical and structural properties of sputtered TiNxOy/TiNx multilayer films were investigated as a function of annealing temperature. In order to achieve a stable high resistivity, multilayer films were annealed at various temperatures in oxygen ambient. Samples annealed at 700 oC for 1 min exhibit a good TCR value and a stable high resistivity.

• 환경영향평가
• /
• 제19권3호
• /
• pp.259-270
• /
• 2010

We conducted human risk assessment for exposure to inhalation of chemical substances emitted from the storage tanks of petroleum refineries. To assess human risk, this study calculated chemical emissions from the external floating roofs on storage tank at petroleum refineries, as well as concentrations thereof in the ambient air using the K-SCREEN model, and then determined risk in accordance with the Reference Concentration (RfC) values and Inhalation Unit Risk criteria developed by the US Environmental Protection Agency. The results indicated that non-carcinogenic chemicals have a hazard quotient of less than 1, meaning they have an insignificant effect on human health for residential areas near the storage tanks. Among the known carcinogens, the hazard risk for benzene slightly exceeded $10^{-6}$, indicating the need for corrective reduction measures. The methodology for health impact assessment devised herein provides findings useful in decision making for policy makers and the general public with respect to construction of industrial complexes. However, the methodology proposed herein does have limitations, including discrepancy in results induced by use of U.S. data (due to the lack of usable domestic data). More systematic studies from related researchers will be needed to address these issues and produce more reliable outcomes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1343_1344
• /
• 2009

In this work, transparent conducting Al-doped zinc oxide (AZO) films were prepared on Corning glass substrate by RF magnetron sputtering using an Al-doped ZnO target (Al: 2 wt.%) at room temperature and all films were deposited with athickness of 150 nm. We investigated the effects of the post-annealing temperature and the annealing ambient on structural, electrical and optical properties of AZO films. The films were annealed at temperatures ranging from 300 to $500^{\circ}C$ in steps of $100^{\circ}C$ using rapid thermal annealing equipment in oxygen. The thickness of the film was observed by field emission scanning electron microscopy (FE-SEM) and grain size was calculated from the XRD spectra using the Scherrer equation and their electrical properties were investigated using a hole measurement and the reflectance of AZO films was investigated by UV-VIS spectrometry.