• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.97-105
• /
• 2016

최근 국내에서는 노후화된 도심지 도로 등을 신속하게 보수하기 위하여 초속경 콘크리트-폴리머 복합체를 사용하는 사례가 증가하고 있다. 그러나, 초속경 콘크리트-폴리머 복합체의 주재료로 사용되는 초속경시멘트와 폴리머의 높은 가격과 큰 환경부하로 보다 경제적이고 친환경적인 재료의 개발이 요구된다. 이에 본 연구에서는 제강슬래그를 재활용하여 환경부하가 작은 CAC 및 GC를 초속경시멘트에 일부 치환한 초속경 콘크리트-폴리머 복합체의 특성을 폴리머 종류별로 검토함으로써 초속경시멘트의 대체재로서 CAC 및 GC의 활용가능 여부와 초속경 콘크리트-폴리머 복합체의 성능향상 가능성을 검토하였다. 그 결과 CAC 및 GC를 초속경시멘트에 일부 치환한 경우의 압축강도, 인장강도, 휨강도, 접착강도 및 탄성계수는 초기재령인 3시간에서는 기존보다 명확히 높은 값을 보였고, 그 이후의 재령에서는 거의 동등한 수준의 값을 보였다. 폴리머 디스퍼션 종류에 따라서는 BPD를 사용한 경우가 강도측면에서는 전반적으로 우수하였지만, 탄성계수는 동등한 수준을 보였다. 이상의 결과로부터 초속경 콘크리트-폴리머 복합체 제조용 시멘트로서 CAC 및 GC의 일부 대체사용이 가능하고, 폴리머 디스퍼션으로 BPD를 사용 시 초속경 콘크리트-폴리머 복합체의 성능향상도 가능한 것으로 나타났다.

• 한국세라믹학회지
• /
• 제17권2호
• /
• pp.96-100
• /
• 1980

The castable refractory, CaO.$2Al_2O_3$ is a useful alumina cement for iron, steel and cement for iron, steel and cement industries, however it is difficult to produce CaO.$2Al_2O_3$because of its high melting point(180$0^{\circ}C$) and narrow firing range. In this study, the coprecipitation method was used to produce CaO.$2Al_2O_3$ for lower temperature firing . This method involved the titration of mixed solution of calicum and aluminate which extracted from domestic kaolin with $NH4_OH$ solution under blowing $CO_2$ gas into the solution. The coprecipitate and its clacined products were analyzed by X-ray diffraction and DTA. The calcined products fired between 400 and 90$0^{\circ}C$ were amorphous, but at 100$0^{\circ}C$ the coprecipitate was converted into one compound, CaO$2Al_2O_3$. From those experimental results, it was found that we could synthesizze CaO.$2Al_2O_3$ at about 100$0^{\circ}C$ which is lower than conventional firing temperature by around 80$0^{\circ}C$. The refractoriness of this alumina cement was SK 34 and the compressive strength ( 1 day) was about 250kg/$\textrm{cm}^2$.

• 한국세라믹학회지
• /
• 제18권3호
• /
• pp.157-162
• /
• 1981

A converter slag has been heat-treated above melting point at reduced condition by cokes. As the result, most iron was separated. To make hydraulic compounds, calcium oxide was added to the reduced converter slag and the mixtures were sintered. This modified converter slag clinker mainly contained tricalcium silicate and calcium aluminates, and have a great potential to be a good hydraulic cement. The hydrates of the hydraulic compounds and gypsum with and without granulated slags, were mainly C-S-H, ettringite, calcium monosulfoaluminate hydrate, calcium aluminate hydrate, and $Ca(OH)_2$

• 콘크리트학회지
• /
• 제4권2호
• /
• pp.119-126
• /
• 1992

고강도 시멘트 복합체의 유동성 손실을 감소시키기 위한 연구의 일환으로 시멘트계 입자에 대한 고성능감수제의 흡착특성, 현탄액 속에서의 응집특성을 관찰하여 시멘트풀과 모르터의 유동성과 관련시켜 고찰하였다. 본 연구결과 알루미네이트계 화합물이 많이 함유된 보통포틀랜드 시멘트의 흡착률이 가장 크며, 시멘트풀 및 모르처의 유동성 손실이 작았으며 나프탈린계 고성능 감수제가 유동성 손실면에서 얼마간 유리하였다.

• 한국환경과학회지
• /
• 제29권6호
• /
• pp.605-612
• /
• 2020

To improve the initial strength and stability of lightweight-foamed concrete, which shows suitable sound absorption and insulation characteristics, the effect of CO₂-reduced cement on the properties of the concrete was investigated. Various mixing ratios were applied by substituting a certain amount of slag and Calcium Sulfo Aluminate (CSA) in CO₂-reduced Ordinary Portland Cement (OPC) and the physical properties of the samples were examined using the Korean Standard. The kiln temperatures of the CSA were 100-200℃ ; these values are lower than those of OPC and can lead to energy saving. In addition, the low limestone content reduces greenhouse gas emissions by 20 %. Adding a small amount of CSA in OPC content activates Ca-Al-H₂-based hydrates, and the initial compressive strength of the concrete is improved. As the CSA content increased, the thermal conductivity of the concrete decreased by up to 8% compared to plain concrete, thus indicating an improvement in its insulation. Therefore, the settlement stability was improved as the addition of CSA shortened the setting time.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.55-60
• /
• 2015

In this study, influence of different stone powders (SP), including limestone powders (LP), quartzite powders (QP), and granitic powders (GP), on the hydration behaviors of portland cement, for example, setting time, hydration heat, and hydration products, were discussed. The initial and the final setting time both shorten when the content of LP is 5 %, however, they are slightly delayed by the other two SPs. The LP has no obvious influence on the arrival time of the first peak in the exothermal curves, and it makes the peak value decrease; the other two SPs postpone the appearance of the first peak, and they also make the peak value decrease. For the second peak, LP shifts the peak position to the left, QP has no effect on this peak position, and GP makes the appearance of this peak delayed by 143 min. Similarly, three kinds of SPs have different influence on the hydration products of portland cement. The LP precipitates the formation of hydrated calcium carbo aluminate, the QP the formation of hydrated garnet, and the GP makes the amount of Tobermorite increase.

• 한국세라믹학회지
• /
• 제12권4호
• /
• pp.3-8
• /
• 1975

Hydration processes of the rapid hardening cement clinkers, which were synthesized from domestic alunite for major alumina source, limestone, kaolin and fluorite, were investigated by means of x-ray diffraction analysis, thermal analysis and microscopic observation etc. The clinkers were composed mainly of alite, calcium fluroaluminate (C11A7.CaF2) minerals. While the hydratio processes of the clinkers are altered by concentration of SO3 in the paste, calcium aluminate hydrates such as C4AH13, CAH10 and calcium monosulfate hydrate (C3A.CaSO4.12H2O) are formed at first and then some of them are transformed into ettringite(C3A.3CaSO4.32H2O) within 30~60 min. when the concentration of SO3 in the paste are enough. However the formed ettringite are changed slowly into calcium monosulfate hydrate as the concentration of SO3 become lowered, and the paste is hardened with these close-packed minerals. When the content of SO3 in clinker is so enough, calcium sulfoaluminate hydrates are found without any addition of anhydrite or hemi-hydrite.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.323-324
• /
• 2010

본 연구는 국내에서 사용하고 있는 숏크리트용 급결제의 알칼리-실리카 반응성을 검토하기 위하여 실시하였다. 따라서 국내산 1종 시멘트에 급결제(알루미네이트계, 알칼리프리계, 시멘트광물계)를 혼입하여 알칼리-실리카 반응에 대한 영향을 검토해 보았다. 시험 결과 비반응성 골재를 사용한 경우 급결제의 등가알칼리 함량이 달라져도 알칼리-실리카 반응으로 인한 유해한 팽창은 발생하지 않았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.397-400
• /
• 2005

This study is a result that, in order to improve the early stage strength of fly ash, the calciumsulfoaluminate in which the generation of ettringite was very active in the early stage was substituted by some amount, and then the effect on the early stage was analyzed. when fly ash was substituted by 30$\%$, the strength dropped by maximum 54 $\%$ in the 3rd day of aging, compared to the cement mixture, but when CSA was substituted by 8 $\%$ in the fly ash amount, the strength improved at the 86 percent level of cement, it is suggested as an economical and effective method to improve the early-stage strength that CSA should be mixed by 8$\%$ compared to the fly ash amount used

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.183-184
• /
• 2023

Considering the actual marine environment construction, this paper monitors the mechanical properties (Flexural, Compressive strength) by exposing alumina cement to seawater. As a result of the experiment, it was confirmed that the strength decreases by about -25% when curing in seawater, but the target strength of the product is met, so it is believed that exposure to the actual marine environment will not be significantly affected.