International Journal of Concrete Structures and Materials

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Hydration Behaviors of Portland Cement with Different Lithologic Stone Powders

  • Xiong, Zuqiang (School of Energy Science and Engineering, Henan Polytechnic University) ;
  • Wang, Peng (School of Energy Science and Engineering, Henan Polytechnic University) ;
  • Wang, Yuli (School of Materials Science and Engineering, Henan Polytechnic University)
  • Received : 2014.01.17
  • Accepted : 2014.07.18
  • Published : 2015.03.30
⟨ Previous Next ⟩

Abstract

In this study, influence of different stone powders (SP), including limestone powders (LP), quartzite powders (QP), and granitic powders (GP), on the hydration behaviors of portland cement, for example, setting time, hydration heat, and hydration products, were discussed. The initial and the final setting time both shorten when the content of LP is 5 %, however, they are slightly delayed by the other two SPs. The LP has no obvious influence on the arrival time of the first peak in the exothermal curves, and it makes the peak value decrease; the other two SPs postpone the appearance of the first peak, and they also make the peak value decrease. For the second peak, LP shifts the peak position to the left, QP has no effect on this peak position, and GP makes the appearance of this peak delayed by 143 min. Similarly, three kinds of SPs have different influence on the hydration products of portland cement. The LP precipitates the formation of hydrated calcium carbo aluminate, the QP the formation of hydrated garnet, and the GP makes the amount of Tobermorite increase.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Bonavetti, V., Donza, H., Menendez, G., Cabrera, O., & Irassar, E. F. (2003). Limestone filler cement in low w/c concrete: A rational use of energy. Cement and Concrete Research, 33(6), 865-871. https://doi.org/10.1016/S0008-8846(02)01087-6
  2. Bonavetti, V. L., & Irassar, E. F. (1994). The effect of stone dust content in sand. Cement and Concrete Research, 24(3), 580-590. https://doi.org/10.1016/0008-8846(94)90147-3
  3. Bonavetti, V. L., Rahhal, V. F., & Irassar, E. F. (2001). Studies on the carboaluminate formation in limestone filler-blended cements. Cement and Concrete Research, 31, 853-859. https://doi.org/10.1016/S0008-8846(01)00491-4
  4. Gutteridge, W. A., & Dalziel, J. A. (1990). Filler cement: The effect of the secondary component on the hydration of Portland cement: Part I. A fine non-hydraulic filler. Cement and Concrete Research, 20(5), 778-782. https://doi.org/10.1016/0008-8846(90)90011-L
  5. Kakali, G., Tsivilis, S., Aggeli, E., & Bati, M. (2000). Hydration products of $C_3A$, $C_3S$ and portland cement in the presence of $CaCO_3$. Cement and Concrete Research, 30, 1073-1077. https://doi.org/10.1016/S0008-8846(00)00292-1
  6. Kumar, A., Oey, T., Kim, S., Thomas, D., Badran, S., Li, J., et al. (2013a). Simple methods to estimate the influence of limestone fillers on reaction and property evolution in cementitious materials. Cement & Concrete Composites, 42, 20-29. https://doi.org/10.1016/j.cemconcomp.2013.05.002
  7. Kumar, A., Oey, T., Falla, G. P., Henkensiefken, R., Neithalath, N., & Sant, G. (2013b). A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials. Construction and Building Materials, 43, 428-435. https://doi.org/10.1016/j.conbuildmat.2013.02.032
  8. Li, B. X., Zhou, M.-K., Tian, J.-P., & Hu, X.-M. (2006). Effect of stone dust and fly ash on properties of C60 high performance concrete containing manufactured sand. Journal of Building Materials, 9(4), 381-387 (in Chinese).
  9. Oey, T., Kumar, A., Bullard, J. W., & Neithalath, N. (2013). The filler effect: The influence of filler content and surface area on cementitious reaction rates. Journal of the American Ceramic Society, 96(6), 1987-1990.
  10. Poppe, A.-M., & Schutter, G. D. (2005). Cement hydration in the presence of high filler contents. Cement and Concrete Research, 35(12), 2290-2299. https://doi.org/10.1016/j.cemconres.2005.03.008
  11. Runzhang, Y. (1996). Bonding materials science (in China). Wuhan, China: Wuhan University of Technology Press.
  12. Soroka, I., & Stern, N. (1976). Calcareous fillers and the compressive strength of portland cement. Cement and Concrete Research, 6(3), 367-376. https://doi.org/10.1016/0008-8846(76)90099-5
  13. Zhou, M., Peng, S., Xu, J., & Zhu, C. (1996). Effect of stone powder on stone chippings concrete. Journal of Wuhan University of Technology (Materials Sciences Edition), 11(4), 29-34 (in Chinese).

Cited by

  1. Fresh and hardened properties of green binder concrete containing marble powder and brick powder vol.20, pp.1, 2015, https://doi.org/10.1080/19648189.2016.1246692
  2. Comparison of Effects of Sodium Bicarbonate and Sodium Carbonate on the Hydration and Properties of Portland Cement Paste vol.12, pp.7, 2015, https://doi.org/10.3390/ma12071033
  3. Role of recycling fine materials as filler for improving performance of concrete - a review vol.17, pp.2, 2015, https://doi.org/10.1080/14488353.2019.1626692
  4. Effect of Magnesium Carbonate on Hydration and Hardened Properties of Portland Cement Paste vol.24, pp.12, 2020, https://doi.org/10.1007/s12205-020-2292-3
  5. Effect of Li2CO3 on the properties of Portland cement paste vol.54, pp.1, 2015, https://doi.org/10.1617/s11527-020-01609-2