• Bulletin of the Korean Chemical Society
• /
• 제17권12호
• /
• pp.1132-1135
• /
• 1996

N-Substituted anilines react with triethanolamine at 180℃ in the presence of a catalytic amount of tris(triphenylphosphine)ruthenium(Ⅱ) chloride to give the corresponding 1-substituted indoles in good to high yields. Similar treatment of the anilines with N-benzyldiethanolamine or triisopropanolamine in place of triethanolamine also affords the indoles in good yields. An intermolecular alkyl group transfer between anilines and alkanolamines is assumed to be the key step of these reactions.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.241-247
• /
• 2000

This paper reports on an experimental study of the absorption of COS in a secondary amine diethanolamine. The primary objectives were to investigate an analogy between $N_2$O and COS, thereby allowing an estimation of the physical solubility and diffusivity of the sulfur gases in the reacting amine solutions. The solubilities and diffusivities of $N_2$O and COS in 5~25% aqueous polyethylene glycol at $25^{\circ}C$ were measured. The results appeared to verify the use of an $N_2$O-COS analogy for estimating the solubility and diffusivity of COS in aqueous solutions of alkanolamines up to an approximate 25 weight % concentration. The mean deviation of the $N_2$O analogy relative to the measured solubilities was 3.7%, and the mean deviation between the analogy and the measured diffusion coefficients using the experimental values for Hcos/PEG was 14.6%.

• Bulletin of the Korean Chemical Society
• /
• 제7권6호
• /
• pp.484-485
• /
• 1986

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2004년도 International Conference Global Environmental Problems and their Health Consequences
• /
• pp.217-222
• /
• 2004

This study was conducted to estimate if the level of several chemical ingredients including alkanolamines or ethanolamines (EA) examined in the specific synthetic metalworking fluid (MWF) ‘A’ can cause anti-microbial activity and health effect. Three water-based MWF products (‘A’, ‘B’, and ‘C’) were studied every week for two months. Chemical ingredients such as formaldehyde, boron, EA, and copper were examined. In the sump where MWF ‘A’ was used, not only the total level of EA, monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA), but also boron level were significantly higher than those of the other MWFs. ANOVA statistical tests indicated that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF ‘A’ were significantly higher than those in other MWF types. Correlation tests also found that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF ‘A’ are significantly correlated. We suggested the assumptions that excessive concentrations of EA, and borate at a high pH level, may cause anti-microbial resistance synergically. To demonstrate this assumption, additional study is needed to examine the relationship between the levels of microbes and excessive concentrations of EA, and borate at a high pH level.

• KSTLE International Journal
• /
• 제4권2호
• /
• pp.52-55
• /
• 2003

This study was conducted to estimate if the level of several chemical ingredients including alkanolamines or ethanolamines (EA) examined in the specific synthetic metalworking fluid (MWF) "A" can cause anti-microbial activity and health effect. Three water-based MWF products ("A", "B", and "C") were studied every week for two months (from June 1, 2002 to July 30, 2002). Chemical ingredients such as formaldehyde, boron, EA, and copper were examined. In the sump where MWF "A" was used, not only the total level of EA, monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA), but also boron level were significantly higher than those of the other MWFs. ANOVA statistical tests indicated that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF "A" were significantly higher than those in other MWF types. Correlation tests also found that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF "A" are significantly correlated. We suggested the assumptions that excessive concentrations of EA, and borate at a high pH level, may cause anti-microbial resistance synergically. To demonstrate this assumption, additional study is needed to examine the relationship between the levels of microbes and excessive concentrations of EA, and borate at a high pH level.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.213-216
• /
• 2003

This study was conducted to estimate if the level of several chemical ingredients including alkanolamines or ethanolamines (EA) examined in the specific synthetic metalworking fluid (MWF) “A” can cause anti-microbial activity and health effect. Three water-based MWF products (“A”, “B”, and “C”) were studied every week for two months (from June 1, 2002 to July 30, 2002). Chemical ingredients such as formaldehyde, boron, EA, and copper were examined. In the sump where MWF “A” was used, not only the total level of EA, monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA), but also boron level were significantly higher than those of the other MWFs. ANOVA statistical tests indicated that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF A were significantly higher than those in other MWF types. Correlation tests also found that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF “A” are significantly correlated. We suggested the assumptions that excessive concentrations of EA, and borate at a high pH level, may cause anti-microbial resistance synergically, To demonstrate this assumption, additional study is needed to examine the relationship between the levels of microbes and excessive concentrations of EA, and borate at a high pH level.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.385-393
• /
• 2016

Oxidative and thermal degradation of alkanolamines for a promising $CO_2$ capture technology of absorption might cause decrease in $CO_2$ capture efficiency and formation of hazardous byproducts. In this study, characteristics of a representative absorbent of monoehtanolamine (MEA) were examined for a long term operation using a laboratory scale absorption system. An $CO_2$ absorption system with ID 56 mm and absorption zone height 100 cm was developed for the characterization. Absorption solution of 30 wt% MEA was circulated at 100 mL/min to treat air with 15% $CO_2$ and 1 ppm NO at 10 L/min. Temperatures of absorber and stripper were maintained at $40^{\circ}C$ and $120^{\circ}C$, respectively. For the course of 5 weeks continuous operation, MEA concentration was decreased approximately by 70% and $CO_2$ removal efficiency was dropped from 95% to 65%. Ionic byproducts of $NH_4{^+}$, $NO_2{^-}$, and $NO_3{^-}$ were accumulated up to 48 g/mL, 0.2 g/mL, and 1.5 g/mL, respectively, tracking the variation of MEA concentration. Formation of various organic byproducts were also observed.

• 대한환경공학회지
• /
• 제36권3호
• /
• pp.185-191
• /
• 2014

본 논문에서는 저농도 $CO_2$ 조건에서 알카놀아민 흡수제 별 $CO_2$ 흡수 특성을 도출하였다. 단일흡수제의 경우 MEA 농도가 1 wt%, 2 wt%, 3 wt% 증가 시 $CO_2$ 흡수량은 0.34 mol-$CO_2/mol$-absorbent, 0.32 mol-$CO_2/mol$-absorbent, 0.30 mol-$CO_2/mol$-absorbent로 감소하였고, AMP 농도가 1 wt%, 2 wt%, 3 wt% 증가 시 $CO_2$ 흡수량은 0.32 mol-$CO_2/mol$-absorbent, 0.30 mol-$CO_2/mol$-absorbent, 0.28 mol-$CO_2/mol$-absorbent로 감소하였다. 혼합흡수제의 경우 MEA 0.5 wt%와 AMP 0.5 wt%을 혼합했을 때 0.52 mol-$CO_2/mol$-absorbent로 최대치를 나타냈다.

• 에너지공학
• /
• 제14권4호
• /
• pp.219-225
• /
• 2005

지구온난화의 주원인인 이산화탄소를 배가스에서 제거하는데 있어 화학적 흡수법은 다년간 광범위하게 응용되어오고 있으며, 주로 MEA(monoethanolamine), AMF(2-amino-2-methyl-1-propanol), MDEA(N-methyldiethanolamine)와 같은 알칸올아민계열의 물질들이 흡수제로 사용되고 있다. 본 연구에서는 환형아민계열의 Piperazine, Piperidine, Cyclohexylamine을 앞서 언급한 물질들을 대체할 새로운 흡수제 후보로 선정하여, 상용화된 MEA를 대상으로 용해도($CO_2$ loading)와 흡수능(loading capacity) 및 반응속도를 비교하였는데, Piperazine이 최적의 흡수제임을 알 수 있었다. 실험은 질량 기준으로 5, 10, $15\%$ 농도, 30, 40, $50^{\circ}C$ 온도에서 수행하였고, 재적정법으로 반응 종료 후 액체 시료 내 이산화탄소의 용해도를 분석하였으며 가스 크로마토그래프 분석을 통해 반응속도를 비교할 수 있었다.

• 한국대기환경학회지
• /
• 제17권5호
• /
• pp.407-414
• /
• 2001

In this study, the absorption kinetics of $CO_2$onto a mixture of AMP (2-amino-2-methyl-1-propanol) MEA (monoethanolamine) water were investigated at 30 and 4$0^{\circ}C$ using a packed absorption tower. Solubility and absorption rate of $CO_2$into alkanolamine solutions and optimal condition of $CO_2$absorption process were investigated. The experimental conditions are as follows; temperature of 30 and 4$0^{\circ}C$, gas flow rate of 3ι/min for the absorption tower, and liquid flow rate of 0.1ι/min. Feed gas was a mixture of 85% $N_2$and 15% $CO_2$. The experimental results showed that AMP had greater solubilities and faster absorption rates than MEA and DEA. In addition, MEA had the fastest initial reaction rate. To improve the properties of AMP which have low initial reaction rate and high cost, AMP was used with MEA. The mixing ratio was also changed in constant total molarity of 1,2,3 and 4. The experimental results can be summarized as follows: (1) in solubility experiment, the addition of MEA in constant total polarity decreased the solubility of $CO_2$in AMP/MEA mixture. (2) from 0 to about 0.3 in mixing ratio, the solubility of $CO_2$in AMP/MEA mixture had little differences compared with the sum of solubility of AMP only and solubility of MEA only . (3) mixing ratio of 0.3 was found to be an optimal point with the fastest $CO_2$absorption rate.