• Applied Biological Chemistry
• /
• 제7권
• /
• pp.15-19
• /
• 1966

유리제(製) 포장용기(包裝容器)의 질(質)이 Malathion 유제(乳劑)의 주성분(主成分) O-dimethyl S-(1, 2-dicarboxyethoxyethyl) di-thiophosphate에 미치는 경시적분해관계(輕視的分解關係)를 밝히기 위(爲)하여 각각(各各) 다른 3개회사(三個會社)에서 사용(使用)하고 있는 100 ml용(容) 갈색병(褐色甁)과 Pyrex flask를 대조(對照)로 하여 저장기간중(貯藏期間中) 용기(容器)로부터의 무기성분(無機成分)의 용출량(溶出量) pH치(値)의 변화(變化) 및 Malathion 주성분(主成分)의 분해율(分解率)을 비교(比較) 검토(檢討)하였다. 1. 공시용기(供試容器) A.B.C에다 Malathion 유제(乳劑)를 넣고 60 일(日), 120 일(日), 240 일후(日後)에 일어나는 여러가지 변화(變化)를 보았다. 2. 각기간중(各期間中)의 Si, Mg. K. Ca, Na의 용출량(溶出量)을 보면, 용기(容器)의 질(質)에 따라 각성분(各成分)의 용출량(溶出量)이 현저(顯著)히 다르고 용기(容器) A는 B,C, 보다 Na와 Ca의 용출량(溶出量)이 240 일간(日間)에 근(近) 10 배(倍)나 된다. 3. 각기간중(各期間中)의 pH 변화(變化)는 pH 6.6 에서 모두 알칼리성(性)으로 기울어지며 특히 용기(容器) A는 60 일후(日後)에 pH 9.2에 달하여 240 일후(日後)에는 9.9 까지 이른다. 그러나 Pyrex flask에서는 거의 변화(變化)가 없다. 4. Malathion의 경시변화율(輕視變化率)은 용기(容器) A에서 가장 크며 240 일후(日後)에는 7.37%나 분해(分解)된다. 그러나 pyrex flask 에서는 0.51%가 분해(分解)된다. 5. Malathion 분해율(分解率)과 동일(同一)한 질(質)의 용기(容器)에 넣어둔 물의 pH 변화(變化)와의 상관관계(相關關係)는 $r^2=0.899$ 이다. 이상(以上)의 실험결과(實驗結果)로 보아 Malathion 유제(乳劑)는 이의 용기(容器)로서 연질(軟質)인 불량(不良)한 유리병에다 저장(貯藏)하게 되면 알칼리성(性) 금속염(金屬鹽)의 용출(溶出)로 Malathion의 분해(分解)가 촉진(促進)되어 1년간(年間)에 약(約) 10나 분해(分解)됨을 알수 있다.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.49-57
• /
• 1999

In CLO2 delignification and bleaching process, formation of chlorate corresponds to a loss of 20-36% of the original CKO2 charge. Because chlorate is inactive and harmful to environmental, it will be of benefit to find methods that can reduce the formation of chlorate during chlorine dioxide bleaching. Chlorate is mainly formed by the reaction HCIO +ClO2 $\longrightarrow$H+ + Cl_ +ClO3-2 On the other hand, AOX in chlorine dioxide bleacing is formed also due to the in-situ produced hypochlorous acid. THus both AOX and chlorate could be reduced by addition of hypochlorous acid. Some paper son the reduction of AOX by additives appeared , but systematic data on chlorate reduction as well as pulp and effluent properties are not available. THus this paper of focused on the effects on the reduction of chlorate and chlorine dioxide bleachability. The additives, fulfamic a챵, AMSO, hydrogen peroxide, oxalic acid were found to eliminate chlorine selectively in chlorine and chlorine dioxide mixture.However, when they were added to bleaching process, sulfamic acid and DMSO showed significant reduction of chlorate formation but hydrogen peroxide and oxalic aicd did not, and significant amount ofhydrogen peroxide was found resided in the bleaching effluent , In addition, sulfamic acid and DMSO decreased the bleaching end ph values while hydrogen peroxide and oxalic acid did not, which also indicated that hydrogen peroxide and oxalic acid were ineffective. The difference might be ascribed to the competitives of hypochlorous acid with lignin, chlorite (CKO2) and additives. Sulfamic acid and DMSO showed better pulpbrightness development but less alkaline extraction efficiency than hydrogen peroxide , oxalic acid and control, which means that insitu hypochlorous acid contributes to the formation of new chromophore structures that can be easily eliminated by alkaline extraction. DMSO decreased the delignification ability of chlorine dioxide due to the elimination of hypochlorous acid, but sfulfamic acid did to because the chlroinated sulfamic acid had stable bleachability. In addition, sulfamic acid, and SMSO shwed decreased color and COD of bleaching effluents, hydrogen peroxide decreased effluent color but not COD content, and oxalic acid had no statistically significant effects. No significant decreases of pulp viocosity were found except for hydrogen peroxide. Based on our results , we suggest that the effectiveness of hydrogen peroxide on the reduction of AOX in literature might be explained by other mechanisms not due to the elimination of hypochlorous acid , but to the direct decomposition of AOX by hydrogen peroxide.

• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.535-539
• /
• 2006

가연성 폐기물 가스화반응으로 생성되는 합성가스내의 $CO_2$ 제거반응에서 $Li_2ZrO_3$와 알칼리염 첨가제의 효과를 열중량 분석기를 이용하여 그 특성을 연구하였다. $Li_2ZrO_3$는 고체상태의 $ZrO_2$와 $Li_2CO_3$를 합성하여 제조하였고, 반응성향상을 위하여 $K_2CO_3$, $Na_2CO_3$, NaCl, LiCl 등의 알칼리염을 첨가한 후 열처리하여 사용하였다. 첨가한 알칼리염에 따른 반응성 향상은 $K_2CO_3>NaCl>LiCl>Na_2CO_3$ 순으로 나타났고 이는 $Li_2CO_3$의 partial melting에 기인한 것으로 사료된다. 반응 시료의 SEM 분석 결과 용융상태의 존재를 확인할 수 있었고, XRD를 통해 첨가된 알칼리염들의 화학적 성분 변화는 일어나지 않는 것으로 확인되었다. NaCl을 사용한 경우 반응 초기에 60분 정도의 유도시간이 발생하였으며, $Na_2CO_3$가 첨가된 경우 $700{\sim}750^{\circ}C$에서도 $Li_2ZrO_3$의 $CO_2$ 제거반응에 의해 생성된 $Li_2CO_3$의 분해가 유도되지 않아 반응성 감소현상이 나타나지 않았다.

• 한국광물학회지
• /
• 제15권4호
• /
• pp.243-257
• /
• 2002

Ca-형과 Na-형 벤토나이트는 물성의 차이로 인하여 그 용도를 달리하며, 국내에서는 Ca-형 벤토나이트만 산출되기 때문에 산업체에서는 Na-형으로 변환시켜 토목용이나 주물용으로 활용되고 있다. 이 연구는 Ca-형과 Na-형 벤토나이트의 몇 가지 물성을 비교하여 그 차별성을 명확히 밝히고자 한다. 또한 HDTMA(Hexadecyltrimethylammonium)나 CP(Cetylprydinium)와 같은 유기양이온을 Ca-형과 Na-형 벤토나이트에 치환시켜 유기 양이온과 벤토나이트와의 흡착 특성을 비교 하고자 시도되었다. Na-형 벤토나이트는 Ca-형 벤토나이트에 비해 강한 알카리성, 매우 높은 팽윤성과 점도를 나타내나, 양이온 교환능과 MB(Methylene Blue) 흡착양은 변화를 보이지 않는다. 탁도는 Na-형 벤토나이트가 높으며 시간의 변화에 따라서도 거의 변화가 초래되지 않았으나, Ca-형 벤토나이트는 단시간 내 급격하게 응집이 초래되었다. 열 분석 결과 큰 차이는 보이지 않으나 흡착수와 층간수의 분해는 Na-형 벤토나이트가 보다 저온에서 빨리 일어나며, 완전한 구조의 분해는 Ca-형 벤토나이트가 Na-형 벤토나이트보다 저온에서 용이하게 일어났다. HDTMA와 CP를 벤토나이트에 치환케 되면 대체적으로 강한 층간팽창이 초래되어 저면 간격이 40 $\AA$ 이상 늘어남으로써 공간을 제공하여 연속적인 흡착이 초래되었다. HDTMA의 흡착은 양이온 교환능의 200% 이상을 치환하였을 때 거의 포화상태에 달하여 저면 간격이 $37～38\AA$으로 팽창이 초래되었으나, CP의 흡착은 양이온 교환능의 140% 이상을 치환케 되면 저면 간격이 $40\AA$에 달하여 거의 포화되었다. 이는 CP가 HDTMA보다 용이하게 층간팽창을 초래시키고 흡착이 일어남을 의미한다. CP와 Ca-형 및 Na-형 벤토나이트와의 흡착거동은 L형의 흡착등온선을 나타내었으며, 매우 규칙적이고 일관성 있게 흡착이 일어남으로써 안정한 상태를 유지하였다. 또한 층간 교환성 양이온 종에 관계없이 유기양이온 흡착거동은 거의 동일하게 일어났다.

• 한국환경과학회지
• /
• 제10권5호
• /
• pp.365-371
• /
• 2001

The optimum dosage of quicklime in producing organic fertilizer using livestock wastes vith a greater than 80% water content was analysed. After one day had elapsed to allow for the organic fentilizer to dry, the quicklime dosage and the composition of the organic fertilizer were analysed. Any from done to the organic fertilizer was also assessed. The amount of the quicklime required to stabilize livestock wastes was determined by water content of livestock wastes. For J farm(slurry style) of which livestock wastes have 94.6% of water concentration, less than 3% of total amount of livestock wastes, for H farm (scraper style) of which livestock wastes have 85% of water concentration, less then 4% of total livestock wastes and Y farm(traditional style) of which livestock wastes have 80% of water concentration, less then 5% of total livestock wastes. Generally, in order to pack the organic fertilizer, water containing quicklime0stabilized livestock wastes should be less than 35%. It takes 9 days to keep this water content for the wastes from H and Y farms(less than 85% in water content), and 12 days for the wastes from J (94.6% in water content). According to the classification standard for compost constitution by Higgins, the crude fertilizers from all 3 farms had high grade $K_2O$ and CaO, the middle grade T-N and middle or low grade $P_2O_5$. Stabilization by quicklime is known to inhibit bacterial decomposition of organic matter and the activity of pathogenic organisms. In this study, more then 99.99% of coliform group, fecal group and viable cell count were reduced. Our results indicate that livestock wastes of greater 80% water content could be used to produce organic fertilizer without the addition of a material for moisture control.

• Nutrition Research and Practice
• /
• 제8권3호
• /
• pp.278-283
• /
• 2014

BACKGROUND/OBJECTIVES: Due to its beneficial health effects, use of buckwheat has shown a continuous increase, and concerns regarding the allergic property of buckwheat have also increased. This study was conducted for evaluation of the hydrolytic effects of seven commercial proteases on buckwheat allergens and its allergenicity. MATERIALS/METHODS: Extracted buckwheat protein was hydrolyzed by seven proteolytic enzymes at individual optimum temperature and pH for four hours. Analysis was then performed using SDS-PAGE, immunoblotting, and competitive inhibition ELISA (ciELISA) with rabbit antiserum to buckwheat protein, and direct ELISA with pooled serum of 21 buckwheat-sensitive patients. RESULTS: Alkaline protease, classified as serine peptidase, was most effective in reducing allergenicity of buckwheat protein. It caused decomposition of the whole buckwheat protein, as shown on SDS-PAGE, and results of immunoblotting showed that the rabbit antiserum to buckwheat protein no longer recognized it as an antigen. Allergenicity showed a decrease of more than 50% when pooled serum of patients was used in ELISA. Two proteolytic enzymes from Aspergillus sp. could not hydrolyze buckwheat allergens effectively, and the allergenicity even appeared to increase. CONCLUSIONS: Serine-type peptidases appeared to show a relatively effective reduction of buckwheat allergenicity. However, the antigenicity measured using rabbit antiserum did not correspond to the allergenicity measured using sera from human patients. Production of less allergenic buckwheat protein may be possible using enzymatic hydrolysis.

• 한국수소및신에너지학회논문집
• /
• 제7권1호
• /
• pp.29-37
• /
• 1996

Alkaline water electrolysis has been commercialized as the only large-scale method for a long time to produce hydrogen and the technology is superior to other methods such as photochemical, thermochemical water splitting, and thermal decomposition method in view of efficiency and related technical problem. However, such conventional electrolyzer do not have high electric efficiency and productivity to apply to large scale hydrogen production for energy or chemical feedstocks. Solid polymer electrolyte water electrolysis using a perfluorocation exchange membrane as an $H^+$ ion conductor is considered to be a promising method, because of capability for operating at high current densities and low cell voltages. So, this is a good technology for the storage of electricity generated by photovoltaic power plants, wind generators and other energy conversion systems. One of the most important R&D topics in electrolyser is how to minimize cell voltage and maximize current density in order to increase the productivity of the electrolyzer. A commercialized technology is the hot press method which the film type electrocatalyst is hot-pressed to soild polymer membrane in order to eliminate the contact resistance. Various technologies, electrocatalyst formed over Nafion membrane surface by means of nonelectrolytic plating process, porous sintered metal(titanium powder) or titanium mesh coated with electrocatalyst, have been studied for preparation of membrane-electrocatalyst composites. In this study some experiments have been conducted at a solid polymer electrolyte water electrolyzer, which consisted of single cell stack with an electrode area of $25cm^2$ in a unipolar arrangement using titanium mesh coated with electrocatalyst.

• Toxicological Research
• /
• 제24권4호
• /
• pp.321-328
• /
• 2008

Smoke flavors based on the thermal decomposition of wood have been applied to a variety of food products as an alternative for traditional smoking. Despite its increasing use, the available genotoxicity data on wood smoke flavors (WSF) are still controversial. Thus, potential genotoxic effects of WSF in four short-term in vitro genotoxicity assays were investigated, which included the Ames assay, chromosomal aberration assay, micronucleus test and the alkaline comet assay. WSF did not cause any mutation in the Ames assay using five tester strains at six concentrations of 0.16, 0.31, 0.63, 1.25, 2.5 and 5 ${\mu}l/plate$. To assess clastogenic effect, the in vitro chromosomal aberration assay was performed using Chinese hamster lung cells. No statistically significant increase in the number of metaphases with structural aberrations was observed at the concentrations of 1.25, 2.5, and 5 ${\mu}l/ml$. The in vitro comet assay and micronucleus test results obtained on L5178Y cells also revealed that WSF has no genotoxicity potential, although there was a marginal increase in micronuclei frequencies and DNA damage in the respective micronucleus and comet assays. Taken together, based on the results obtained from these four in vitro studies, it is concluded that WSF is not a mutagenic agent in bacterial cells and causes no chromosomal and DNA damage in mammalian cells in vitro.

• 폴리머
• /
• 제26권4호
• /
• pp.501-507
• /
• 2002

본 논문에서는 bisphenol-S (BPS)와 epichlorohydrin (ECH)를 NaOH의 촉매하에서 중합시켜 diglycidylether of bisphenol-S (DGEBS) 에폭시 수지를 합성하였다. IR, NMR spectra 분석, 그리고 원소분석에 의해 합성한 DGEBS 에폭시 수지의 화학구조를 확인하였다 산무수화물계 phthalic anhydride (PA)와 tetrahydrophthalic anhydride (THPA)를 경화제로 사용하여 DSC에 의한 열분석을 통하여 DGEBS 에폭시 수지의 경화 동력학과 유리전이온도 ($T_g$)를 고찰하였으며, TGA 열분석을 사용하여 경화된 시편의 열안정성을 측정하였다. 실험 결과 DGEBS/PA계의 경화 활성화 에너지 ($E_a$)는 DGEBS/THPA계보다 높았지만 ($T_g$), 열분해 개시온도 (IDT), 그리고 분해 활성화 에너지 ($E_t$)는 DGEBS/THPA계보다 낮았다. 이는 경화제의 ring strain에 의하여 DGEBS/THPA계의 가교 밀도가 증가하였기 때문인 것으로 사료된다.

• 대한화학회지
• /
• 제26권2호
• /
• pp.88-94
• /
• 1982

요소공장의 굴뚝에서 방출되는 가스상 암모니아와 입자상 암모늄을 측정하여 대기중에서 암모니아가 암모늄으로 전환되는 속도를 추정하였다. 암모니아가 암모늄으로 전환되는 것은 대기중에서의 수송시간에 따라 2단계로 나누어진다. 수송 초기 15분동안의 전환속도는 3.2%ㅡmin$^{-1}$이고 그 후는 0.26%min$^{-1}$이었다. 수송 초기단계에서 전환속도가 빠른 것은 굴뚝에서 방출된 유출가스의 온도강하에 의하여 생성된 물방울에 암모니아가 용해하고, 또 이 알칼리성 물방울에서 요소가 분해반응을 일으킴으로써 암모늄의 농도가 급격히 증가하였기 때문인 것으로 추정되었다. 암모니아 가스의 반감기는 수송 초기단계에서 약 16분이고, 그 후는 192분이었다. 측정기간에 있어서 입자상 암모늄염과 대기온도, 상대습도, 이산화황, 질소산화물 및 부유분진 농도와의 사이에는 상관관계가 관찰되지 않았다.