• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.71-78
• /
• 2015

This study was performed to optimize the integrated thermal-alkali pre-treatment of flotation scum for the enhanced biodegradability. The optimum conditions of the integrated thermal-alkali pre-treatment were obtained using response surface methodology. The disintegration degree of carbohydrate (69.2%) and protein (57.3) were estimated under the optimum conditions. Although the optimum conditions were different, the disintegration degrees were similarly. A fermentative hydrogen batch test was conducted to evaluate the hydrogen production from scum with and/or without. The maximum hydrogen production from scum with pre-treatment was of 0.64 mol H2/mol hexoseadded, which about 1.4 times higher than without pre-treatment.

• 한국식품영양과학회지
• /
• 제12권2호
• /
• pp.146-149
• /
• 1983

사골(四骨) 용출액중(溶出液中) 영양성분 특히 칼슘, 인, 질소성분의 용출량을 증가시키기 위한 기초연구로써 우선 산과 알카리 처리효과를 검토하였다. 산 처리로는 acetic acid를 0~0.8%까지, 알카리 처리로는 sodium bicarbonate를 0~0.05%까지 수준별로 처리하였다. 그 결과는 다음과 같다. 산 처리의 경우 칼슘은 acetic acid 농도가 증가될수록 용출량도 유의적으로 증가되었으며 특히 acetic acid 농도가 0.1% 이상일 때 유의적 증가를 보였으며 인은 0.3% 일 때 용출량이 급격히 증가되었다. Ca/P 비(比)는 acetic acid 농도가 0.01%까지는 1~2를 나타냈지만 그 이상의 모든 처리에서는 2 이상을 나타냈다. ${\alpha}$-amino N과 총 질소는 모두 acetic acid농도가 0.5% 이상일 때 유의적 증가를 보였다. 알카리 처리의 경우는 칼슘, 인, 총 질소는 모든 처리에서 유의적 증가를 나타내지 않았지만 ${\alpha}$-amino N은 sodium bicarbonate 농도가 0.05% 일 때 무처리(無處理)에 비해 유의적 증가를 보였다. (P<0.05) 이상의 결과에서 산 처리에 의해 영양성분의 용출은 현저히 증가되었으나 알카리 처리에 의해서는 크게 증가되지 못했다.

• 농업과학연구
• /
• 제36권2호
• /
• pp.225-232
• /
• 2009

The ratio of saccharification and formation of furans during the acid hydrolysis of agar with oxalic acid and sulfuric acid were examined base on the contents of the agar and acids. The ratio of saccharification in oxalic acid appeared to be 51~59% somewhat higher than 49~61% of sulfuric acid. Formation of the furans during the acid hydrolysis increased proportional to the contents of agar and acid. The relative formation ratio was high 10~47% for furfural (FUR) and 15~29% for hydroxy-methyl furfural (HMF) in 0.5~1.25% sulfuric acid rather than those of oxalic acid. When comparing the removal efficiency of the furans using an alkali treatment, steam stripping and hydrophobic resins, FUR was eliminated 60% by the alkali treatment, 62~90% by steam stripping and 71~75% by Amberlite XAD4 and 7HP, while HMF was removed to low levels of 10.5%, 4~17% and 13~25%, respectively. The loss of reducing sugar was also observed in process of the removal of furans, and the loss rate was the level of 2~4% in alkali treatment, 11~16% in steam stripping and 7~9% in Amberlite resins.

• Asian Journal of Atmospheric Environment
• /
• 제10권4호
• /
• pp.190-196
• /
• 2016

The objective of this study is to obtain the optimal conditions to remove hydrogen fluoride (HF) generated from a variety of F-gas treatment processes. First, we selected $Ca(OH)_2$ and $CaCO_3$ as a reactant among the various alkali salts which have a high removal efficiency and a competitive price by forming a calcium fluoride precipitate. Additionally, various factors were investigated to improve the removal efficiency of HF. The conditions such as the settling time, agitating time and intensity, reaction temperature, and pH were considered as main factors. As a result, in the treatment process to remove HF through Ca-based alkali salts, the optimal conditions were a 120 min settling time, 30 min of agitation at 100 rpm, a pH of 4-8, and a reaction temperature of $40^{\circ}C$.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.385-393
• /
• 1995

Akali-resistant porous glass was prepared by phase separation in Na2O-B2O3-SiO2 system containing ZrO2 and MgO. ZrO2 was added for alkali-resistance and MgO for anti-cracking during leaching. Optimal content of ZrO2 for alkali-resistance was 7wt% and devitrification by heat treatment resulted from further addition. Pore size and pore volume were decreased and specific surface area was increased with ZrO2 addition due to depression in phase separation. Addition of 3mol% MgO to mother glass containing 7wt% ZrO2 was effective for anti-crack during leaching. In this case, with phase separation at 55$0^{\circ}C$ and 5$25^{\circ}C$ for 20 hrs. crack-free porous glasses could be prepared. The relation between pore size r and heat treatment time t at 55$0^{\circ}C$ was D=25.58＋18.16t. According to measurement of gas permeability, the mechanism of gas permeation was Knudsen flow. N2 and He permeability of porous glass which was prepared by heat treatment at 55$0^{\circ}C$ for 20 hrs. were 0.843$\times$10-7mol/$m^2$.s.Pa and 2.161$\times$10-7mol/$m^2$.s.Pa respectively.

• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.214-222
• /
• 2002

In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The weight loss of PET fabrics hydrolyzed in 4% and 6% NaOH solution, at $95^\circ{C}$ and $99^\circ{C}$ for 60min. with ultrasonic application showed 3.7~4.6% higher than that of treated fabric without ultrasonic application. From the difference of specific weight loss, the treatment condition of the maximum of hydrolyzation effect appeared at $95^\circ{C}$ in $4^\circ{C}$ and at $90^\circ{C}$ in 6% NaOH solution, respectively. During the alkali hydrolysis of PET fabrics, the decomposition rate constant(k) increased exponentially with the treatment temperature and were not related with ultrasonic cavitation. The activation energy$(E_a)$ in decomposition of PET fabrics were 21.06kcal/mol with ultrasonic application and 21.10kcal/mol without ultrasonic application. The ultrasonic application gave a little higher value of the activation entropy$(\Delta{S}^\neq)$ and a little lower value of Gibbs free energy$(\Delta{S}^\neq)$ compared with not used ultrasonic apparatus.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.323-323
• /
• 2010

Saw damage of crystalline silicon wafer is unavoidable factor. Usually, alkali treatment for removing the damage has been carried out as the saw damage removal (SDR) process for priming the alkali texture. It usually takes lots of time and energy to remove the sawed damages for solar grade crystalline silicon wafers We implemented two different mixed acidic solution treatments to obtain the improved surface structure of silicon wafer without much sacrifice of the silicon wafer thickness. At the first step, the silicon wafer was dipped into the mixed acidic solution of $HF:HNO_3$=1:2 ration for polished surface and at the second step, it was dipped into the diluted mixed acidic solution of $HF:HNO_3:H_2O$=7:3:10 ratio for porous structure. This double treatment to the silicon wafer brought lower reflectance (25% to 6%) and longer carrier lifetime ($0.15\;{\mu}s$ to $0.39\;{\mu}s$) comparing to the bare poly-crystalline silicon wafer. With optimizing the concentration ratio and the dilution ratio, we can not only effectively substitute the time consuming process of SDR to some extent but also skip plasma enhanced chemical vapor deposition (PECVD) process. Moreover, to conduct alkali texture for pyramidal structure on silicon wafer surface, we can use only nitric acid rich solution of the mixed acidic solution treatment instead of implementing SDR.

• 한국식품과학회지
• /
• 제53권2호
• /
• pp.121-125
• /
• 2021

Very low methoxyl pectin (VLMP) has different physical and rheological properties compared to high and low methoxyl pectins (HMP and LMP). In this study, we produced LMP and VLMP by alkaline de-esterification, and investigated the structural and textural properties. Apple peel pectin was kept at pH 12 using 5.0 M NaOH solution for 3 and 24 h to produce LMP and VLMP, respectively. The molecular weight was decreased due to the removal of an esterified group in the pectin backbones by the alkali treatment, and the VLMP showed a higher calcium ion sensitivity which leads to the production of the gel with increased hardness. The result clearly showed that VLMP has the potential to improve the texture and stability in food products depending on their degree of esterification, and this result can be applied as a functional ingredient in food industrial area application to enhance the current commercial pectins.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.92-97
• /
• 1998

Malodorous gases give discomfort and harm to laborers and residential neighborhoods and therefore, the removing odor materials emitted from plants and industrial facilities is important subject. The main ingredients of alkali odor are $NH_3$ and $CE_3SH$. The adsorption characteristics of odors were studied using four different activated carbon fibers(ACF) and active carbon(AC). Alkali odor was removed by using ACF impregnated with $H_3PO_4$ and $H_2SO_4$ and treated with $HNO_3$ and NaOH. The experimental result showed that ACF has a higher removal efficiency than AC. The adsorption capacity was increased with the impregnation and surface treatment, and $H_2SO_4$ was the best impregnant for the removal of alkali odor.

• Bulletin of the Korean Chemical Society
• /
• 제15권8호
• /
• pp.654-658
• /
• 1994

Rate constants have been measured spectrophotometrically for the nucleophilic substitution reactions of p-and m-nitrophenyl 2-furoates (4 and 5, respectively) with alkali metal ethoxides ($EtO^-M^+$) in absolute ethanol at 25$^{\circ}$C. The reactivity of $EtO^-M^+$ toward 4 is in the order $EtO^-K^+$ > $EtO^-Na^+$> $EtO^-Li^+$ > $EtO^-K^+$+ 18-crown-6 ether. This is further confirmed by an ion pairing treatment method. The present result indicates that (1) ion paired $EtO^-M^+$ is more reactive than dissociated $EtO^-$ ; (2) the alkali metal ions ($K^+,\;Na^+,\;Li^+$) behave as a catalyst; (3) the catalytic effect increases with increasing the size of the metal ion. A similar result has been obtained for the reaction of 5, however, the catalytic effects shown by the metal ions are more significant in the reaction of 5 than in that of 4.