• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.42-48
• /
• 1994

In this paper, a low power and high speed flash Analog-to-Digital Converter using current-mode concept is proposed. Current-mode approach offers a number of advantages over conventional voltage-mode approach, such as lower power consumption small chip area improved accuracy etc. Rescently this concept was applied to algorithmic A/D Converter. But, its conversion speed is limited to medium speed. Consequently this converter is not applicable to the high speed signal processing system. This ADC is fabricated in 1.2um double metal CMOS standard process. This ADC's conversion time is measured to be 7MHz, and power consumption is 2.0mW, and differential nonlinearity is less than 1.14LSB and total harmonic distortion is -50dB. The active area of analog chip is about 350 x 550u$m^2$. The proposed ADC seems suitable for a single chip design of digital signal processing system required high conversion speed, high resolution small chip area and low power consumption.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.7-10
• /
• 2004

This paper describes techniques to implement low-cost adapt ive Pipelined LMS filter for ASIC implement ions of high communication receivers. Power consumpiton can be reduced using a careful selection of architectural, algorithmic, and VLSI circuit techlifue A Pipelined architecture for the strength-reduced algorithm is then developed via the relaxed look-ahead transformation. This technique, which is an approximation of the conventional look-ahead compution, maintains the functionality of the algorithm rather than the input-output behavior Convergence maiysis of the Proposed architecture has been presented and support via simulation results. The resulting pipelined adaptive filter achives a higher though put requires lower power as compared to the filter using the serial algorithm.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.75-80
• /
• 1991

The purpose of this study is to ascertain the robustness of p-version model with hierarchic intergrals of Legendre shape functions in various applications including plane stress/strain, axisymmetric and shell problems. The most important symptoms of accuracy failure in modern finite elements are spurious mechanisms and a phenomenon known as locking which are exhibited for incompressible materials and irregular shapes which contain aspect ratios(R/t, a/b), tapered ratio(d/b), and skewness. The condition numbers and energy norms are used to estimate numerical errors, convergence characteristics and algorithmic efficiencies for verifying the aforementioned symptoms of accuracy failure. Numerical results from p-version models are compared wi th those from NASTRAN, SAP90, and Cheung's hybrid elements.

• 경영과정보연구
• /
• 제2권
• /
• pp.169-193
• /
• 1998

Case- based reasoning(CBR) offers a new approach for developing knowledge based systems. Unlike the rule-based paradigm, in which domain knowledge is encoded in the form of production rules, in the case-based approach the problem solving experience of the domain expert is encoded in the form of cases stored in a casebase(CB). CBR allows a reasoner (1) to propose solutions in domains that are not completely understood by the reasoner, (2) to evaluate solutions when no algorithmic method is available for evaluation, and (3) to interprete open-ended and ill-defined concepts. CBR also helps reasoner (4) take actions to avoid repeating past mistakes, and (5) focus its reasoning on important parts of a problem. Owing to the above advantages, CBR has successfully been applied to many kinds of problems such as design, planning, diagnosis and instruction. In this paper, I propose case-based DSS(CBDSS). CBDSS is an intelligent DSS using CBR technique. CBDSS consists of interface, case-based reasoner, maintainer, casebase management system, domain dependent CB, domain independent CB, and so on.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권1호
• /
• pp.75-81
• /
• 2008

This paper presents a top-down approach to implement an MPEG-2 audio encoder in VLSI. As the algorithm of an MPEG-2 audio encoder is heavy-weighted and heterogeneous(to be mixture of several strategies), the encoder design process is undertaken carefully from the algorithmic level to the architectural level. Firstly, the encoding algorithm is analyzed and divided into sub-algorithms, called tasks, and the tasks are partitioned in the way of reusing the same designs. Secondly, the partitioned tasks are scheduled and synthesized to make the most efficient use of time and space. In the end, a real-time 5 channel MPEG-2 audio encoder is designed which is a heterogeneous multiprocessor system; two hardwired logic blocks and one specialized DSP processor.

• Tuberculosis and Respiratory Diseases
• /
• 제72권2호
• /
• pp.117-123
• /
• 2012

Optimal level of sedation and analgesia is important for the comfort and safety of critically ill patients. However, suboptimal sedation is relatively common in the intensive care unit (ICU) and it could cause prolonged mechanical ventilation and ICU stay, also increase delirium and ICU acquired weakness and resultant decreased survival. Therefore, accurate assessment of the level of sedation and analgesia, maintaining adequate level of sedation, and daily evaluation of each patient and following adjustment could be important treatment strategy in critically ill patients. Recently, the strategy for sedation in the ICU is changing toward the direction of lowering sedation level or even "no sedation" with concurrent use of analgesics and the use of ultra short acting analgesics could be helpful in some patients. Clinicians should be aware of the importance of algorithmic approach including daily interruption of sedative and assessment of sedation level and especially in the patients under mechanical ventilation, organizational approaches such as the 'ABCDE' bundle could improve the management of critically ill patients.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.465-467
• /
• 2004

Finite element analysis of welding processes, which entail phase evolution, heat transfer and deformation, is considered in this paper. Attention focuses on numerical implementation of the thermo-elastic-plastic constitutive equation proposed by Leblond et al in consideration of the transformation plasticity. Based upon the multiplicative decomposition of deformation gradient, hyperelastic formulation is employed for efficient numerical integration, and the algorithmic consistent moduli for elastic-plastic deformations including transformation plasticity are obtained in the closed form. The convergence behavior of the present implementation is demonstrated via a couple of numerical examples. Several locking phenomena removed by Solid-shell element.

• 정보교육학회논문지
• /
• 제14권2호
• /
• pp.199-207
• /
• 2010

본 논문은 정보교과의 초등 프로그래밍 기초 교육에서 흐름도 중심의 프로그래밍 지도를 위해 스퀵 e-toy 프로그래밍을 활용한 알고리즘적 사고 문제를 제안하였다. 그리고 언어 중심의 전통적인 프로그래밍 교육 방법과 대비한 비교 실험 수업을 실시하여, 본 논문에서 제안된 알고리즘적 사고 스퀵 e-toy EPL 문제 기반 교육이 학습자의 메타인지 수준에 따른 GALT 논리적 사고력 향상에 미치는 영향을 비교 분석하였다.

• 경영과학
• /
• 제15권2호
• /
• pp.201-210
• /
• 1998

Truck dispatching is one of the most commonly occurring problems of transprot management. We developed an interactive decision support system named IDSSTD, for the truck dispatching problem where two conflicting objectives are treated and travel speed varies depending on the passing areas and time of day. The IDSSTD aids the decision-making process by allowing the user to interact directly with the database, to direct data to a decision model, and to portray results in a convenient form. The IDSSTD is consisted of two major interactive phases. The pre-scheduling interactive phase is to reduce the complexity of a given problem before applying the BC-saving heuristic algorithm and the post-scheduling interactive phase is to improve practically the algorithmic solution. The IDSSTD has the capabilities of its own manipulation(analysis and recommendation) and diverse graphic features in order to facilitate a user's interaction.

• 경영과학
• /
• 제11권3호
• /
• pp.87-102
• /
• 1994

Conceptual database design is an important activity because the performance of a DBMS heavily depends on the proper design of the database, and view integration is one of the most important phases of conceptual database design. During this phase, the individual views designed by separate user groups are integrated into a global view for the entire system. After the view integration, a database schema must be validated before it becomes a stable product of the design. In this paper, a methodology for view integration an validation is suggested. The individual views are modeled by entity-relationship model. The entities are integrated according to their name and domain information. After that, the relationships are merged by their constraints. We also present a methodology for checking redundant relationships which has an algorithmic description.