• KSBB Journal
• /
• v.14 no.5
• /
• pp.534-538
• /
• 1999

For the optimization of operating conditions for plant cell suspension culture in bioreactors, effects of bioreactor types, various kinds of impellers, and aeration rates were examined using Nicotiana tabacum cells as a model system. Stirred tank bioreactor and airlift bioreactor were used for the comparison of bioreactor type. Growth rates in both bioreactors were lower than in shake flasks. In terms of final cell concentration, stirred tank bioreactor supported a little bit better growth compared to airlift bioreactor. Impeller type did not affect cell growth significantly, but it was apparent that cell size index decreased in the case of using hollowed paddle impeller. When the aeration rate was maintained at 0.3 vvm, cell growth was the best. At above 1.0 vvm, growth inhibition as well a browning was noticed. In addition, it was found that cell size index reduced proportionally to the increased of aeration rate.

• Journal of Plant Biotechnology
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2001

Traditional culture technology of medicinal plants mainly depends on the field culture, which has many problems. With progress of modern culture technology, it has become possible to produce valuable secondary metabolites from medicinal plants. In this paper, we discuss about the pigment and saikosaponin production from too medicinal plants, Carthamus tinctorius and Bupleurum falcatum, through bioreactor culture system. A two-stage bioreactor culture system was established for the production of yellow and red pigments and saikosaponins by cell suspension cultures of Carthamus tinctorius and Bupleurum falcatum. In Carthamus tinctorius, balloon type airlift bioreactors and column type airlift bioreactors were employed for the tell culture and for the pigment production, respectively. The greatest pigment production was obtained on White medium supplemented with 4 mg/L kinetin, high levels of sucrose concentration and photosynthetic photon flux. In Bupleurum falcatum, adventitious roots were cultured in balloon type airlift bioreactors and the root growth was greatest on SH medium containing 5 mg/L IBA and 0.2 mg/L kinetin. HPLC analysis showed that the contents of main active saikosaponins a, c, and d in adventitious roots were almost the same as those in field cultured root.

• Plant Resources
• /
• v.3 no.3
• /
• pp.219-222
• /
• 2000

For the purpose of establishing an efficient propagation through airlift bioreactor system of Zingiber of officinale Rosc. Korean native Seosanjong, the effect of different factors and bioreactor on cultured plantlets were investigated. The highest number of plantlets, fresh weight per plant was obtained from explants when cultured in MS liquid medium including 0.3 mg/L NAA and 2.0 mg/L kinetin for 40 days. A 10 L bottle type bubble bioreactor, compared with 250 mL Erlenmeyer flask, was more efficient, producing 4.7 plantlets or from 1.5 to 1.6 times more than did the Erlenmeyer flask. The results demonstrate the rapid mass propagation of airlift bioreactor to produce normal ginger.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.6
• /
• pp.478-482
• /
• 2004

Suspension culture of Schisandra chinensis for production of gomisin J was perfomed in bioreactor. The inoculum size and initial sucrose concentration had significant effect on the cell growth and gomisin J accumulation. The maximum dry cell weight $(DCW;\;43.5\;g/{\ell})$ and gomisin J content $(0.71\;{\times}\;10^{-3}\;{\mu}g/g\;DCW)$ were obtained at inoculum size of 100 g fresh cell weight (FCW) per liter and MB5 medium containing 6% sucrose after 8 weeks of culture. The effect of oxygen supply on the cell growth and gomisin J accumulation was also investigated in an airlift-type bioreactor. The optimal cell growth and gomisin J content was obtained under 0.5 vvm. The productivity of gomisin J was 0.7 fold in bioreactor culture lower than that obtained in a flask cultivation.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.717-725
• /
• 2002

A bench-scale submerged-type membrane filtration system (SMFS) was constructed to study a feasibility of membrane filtration for solid-liquid separation in water and wastewater treatment processes. In the case of applying the SMFS to a biological wastewater treatment process, so-called membrane bioreactor, aeration underneath membrane modules is usually employed in order to provide oxygen demand for microbial growth as well as to control membrane fouling. A study was investigated the effects of operation parameters by aeration intensity, feed concentration, foulant type and airlift pore size on critical flux. Critical flux tends to increase with aeration rate. Optimal aeration flow rate was found to be 10 L/min/module. Feed concentration and foulant type has a significant effect on membrane fouling and filtration performance. But downward position and pore size of airlift has no a significant effects on membrane fouling and filtration performance.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.3
• /
• pp.135-140
• /
• 2001

A series of studies were carried out to establish micropropagation system, using airlift bioreactors (ebb $\varepsilon$ flood type, 5 L), of Lilium oriental hybrid 'Casa Blanca'. The bulblets with swollen basal plate were formed from bulb scales, then proliferated to bulblet clusters with swollen basal plate. Finally normal bulblets were formed from the sections. Bulblet formation and proliferation with swollen basal plate were not accomplished entirely in liquid culture of 5 L airlift bioreactors, but leafy bulb scales grew vigorously. Bulblet clusters with swollen basal plate were proliferated by periodic immersion culture. Bulblet proliferation was not affected by light, but scale leaves grew under light. MS medium containing 2.0 mg/L benzyl adenine (BA) and 0.3 mg/L indole acetic acid (IAA) was favorable to the bulblet proliferation with swollen basal plate. In liquid culture of 5 L bioreactors, bulblets from bulblet sections with swollen basal plate grew vigorously on MS medium with 70 g/L sucrose. It was effective for bulblet growth to replace the new medium after 8 weeks in culture during 16 weeks of cultural period. 15 g injection of bulblet sections as a cultural material was suitable for bulblet growth in 5 L bioreactors.

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.181-186
• /
• 2003

The production of laccase by Fomitella fraxinea was studied. The addition of minerals were necessary far laccase production by Fomitella fraxinea. Jar fermentor and Air-sparging fermentor performed high productivity In laccase activity by F. fraxinea. Laccase activity reached 3,540 in 8 days (Jar fermentor) and 3,100 in 6 days (Air-sparging fermentor) respectively.

• Microbiology and Biotechnology Letters
• /
• v.22 no.3
• /
• pp.304-308
• /
• 1994

A suitable culture method and bioreactor type for itaconic acid production were chosen by comparing the maximal concentration of itaconic acid produced in various systems. In batch culture, the maximal concentration of itaconic acid produced in a bubble column reactor was about 5% greater than that produced in stirred-tank or external-loop airlift reactor. These results were thought to be due to lower shear force and higher mass transfer efficiency in a bubble column reactor in comparison with other reactors. Moreover, the fed-batch mode in a bubble column was found to be a suitable one, producing about 25% higher concentration of itaconic acid compared to batch mode.