Futo, Andras;Kokenyesi, Tamas;Varjasi, Istvan;Suto, Zoltan;Vajk, Istvan;Balogh, Attila;Balazs, Gergely Gyorgy
Journal of Power Electronics
/
제17권6호
/
pp.1535-1544
/
2017
Advances in FPGA technology have enabled fast real-time simulation of power converters, filters and loads. FPGA based HIL (Hardware-In-the-Loop) simulators have revolutionized control hardware and software development for power electronics. Common time step sizes in the order of 100ns are sufficient for simulating switching frequency current and voltage ripples. In order to keep the time step as small as possible, ideal switching function models are often used to simulate the phase legs. This often produces inferior results when simulating the discontinuous conduction mode (DCM) and disabled operational states. Therefore, the corresponding measurement and protection units cannot be tested properly. This paper describes a new solution for this problem utilizing a discrete-time PI controller. The PI controller simulates the proper DC and low frequency AC components of the phase leg voltage during disabled operation. It also retains the advantage of fast real-time execution of switch-based models when an accurate simulation of high frequency junction capacitor oscillations is not necessary.
This study develops a dual purpose: i) evaluating the effects of two different Mars atmosphere models (NASA Glenn and GRAM-2001) on aerodynamics of a capsule (Pathfinder) entering the Mars atmosphere, ii) verifying the feasibility of evaluating the ambient density and pressure by means of the methods by McLaughlin and Cassanto, respectively and therefore to re-build the values provided by the models. The method by McLaughlin relies on the evaluation of the capsule drag coefficient, the method by Cassanto relies on the measurement of pressure at a point on the capsule surface in aerodynamic shadow. The study has been carried out computationally by means of: i) a code integrating the equations of dynamics of the capsule for the computation of the entry trajectory, ii) a DSMC code for the solution of the flow field around the capsule in the altitude interval 50-100 km. The models show consistent differences at altitudes higher than about 40 km. It seems that the GRAM-2001 model is more reliable than the NASA Glenn model. In fact, the NASA Glenn model produces, at high altitude, temperatures that seem to be too low compared with those from the GRAM-2001 model and correspondingly very different aerodynamic conditions in terms of Mach, Reynolds and Knudsen numbers. This produces pretty different capsule drag coefficients by the two models as well as pressure on its surface, making not feasible neither the method by McLaughlin nor that by Cassanto, until a single, reliable model of the Mars atmosphere is not established. The present study verified that the implementation of the Cassanto method in Mars atmosphere should rely (such as it is currently) on pressure obtained experimentally in ground facilities.
In order to accommodate the increase in urban population due to government-led national planning and economic growth, many buildings such as houses and business building were supplied. Although the building law was revised and managed to manage the supplied buildings, for the sake of economic benefit, there have been buildings that are enlarged or reconstructed without declaring building permits. In order to manage these buildings, on-site surveys were conducted. but it has many personnel consumption. To solve this problem, a method of using a satellite image and a manned aircraft is utilized, but it is diseconomical and a renewal cycle is long. In addition, it is not utilized to the height, and although it is judged by the shading of the building, it has limitations that it must be calculated individually. In this study, height of the building was calculated by using the unmanned aerial vehicle with low personnel consumption, and the accuracy was verified by comparison with the building register and measured value. In this study, spatial information was constructed using a fast unmanned aerial vehicle with low manpower consumption and the building height was calculated based on this. The accuracy by comparing the calculated building height with the building register and the actual measurement.
대공표적을 탐지/추적하기 위해 운용되는 레이다는 임무 특성에 따라 표적의 탐지를 목적으로 안테나 구동장치가 회전하며 운용되는 탐색레이다와 표적의 예측 위치에 주기적으로 빔을 조향하여 추적하는 추적레이다로 구분한다. 일반적으로 추적레이다는 탐색레이다에 비해 표적 정보 획득 주기가 짧은 특징이 있는데 이러한 특징으로 인하여 추적 정확도는 탐색레이다에 비해 좋지만 짧은 획득 주기로 인한 추적 초기 속도 오차로 인해 표적 예측 오차가 커짐에 따라 항적 연관에 실패하거나 빔 조향을 정상적으로 수행하지 못하여 추적 초반에 표적 추적이 실패하는 경우가 많이 발생하게 된다. 본 논문에서는 위에서 기술한 추적레이다의 추적 초반 문제점들을 해결하기 위해 기존 표적 추적을 위해 활용했던 측정치의 위치 정보(거리, 방위각, 고각) 외에 표적 시선속도 측정값을 활용한 초기 표적 정보 정확도 향상 알고리즘을 제안하고 기존에 추적 초기화 시 많이 사용하는 알고리즘인 Two Point Differential 알고리즘과 성능 비교를 통해 제안하는 알고리즘의 성능을 확인하였다.
본 논문에서는 정해진 시간 내에 프레임을 전송해야 하는 텔레메트리 시스템에 적용하기 위한 실시간 운영체제 기반의 PCM 엔코더를 제안한다. 대형 비행체의 경우 각 센서 및 주변장치로부터 많은 상태 정보들을 계측하므로 시스템의 복잡성이 높아지는 추세이다. 또한 계측 데이터가 많아지면서 정해진 시간 내에 프레임을 전송하기 위한 PCM 엔코더의 역할이 중요해지고 있다. 기존 일반적인 엔코더는 규격이 변경되거나, 추가 기능 구현 시 유연성이 떨어지므로 이를 보완하기 위한 설계가 필요하다. 이에 작은 임베디드 소프트웨어에 탑재가 가능한 실시간 운영체제인 uC/OS-II를 적용한 PCM 엔코더 설계를 제안한다. 또한, 타당성을 확인하기 위해 태스크의 실행시간을 측정하는 시뮬레이션을 수행하여 성능을 확인하였다.
Single particle soot photometer (SP2) is an advanced instrument capable of real-time measurement of concentration, coating thickness, and size distribution of individual BC particle using laser-induced incandescence. So far, there have been insufficient studies examining the real-time characteristics of BC in Korea. In this study, we examined temporal variations in BC concentration and mass size distribution of BC in volume equivalence diameter at a background site of Aewol, Jeju in May. Average concentration and mass median diameter (MMD) of BC particles measured during the study period (06~ 16 May 2013) were $0.69{\pm}0.48{\mu}g/m^3$ and $196{\pm}17nm$, respectively. The BC concentration measured in Aewol was very similar to that observed in the spring of 2012 in Baengnyeong island, and showed diurnal profiles similar to those in other background areas. MMD of BC ranged from 172 to 222 nm. It was found that the mass size distribution of BC varied depending on the location (ground-based), season, types of air masses, and altitude (aircraft-based).
광섬유 TR-EFPI(total reflected extrtinsic Fabry-Perot interferometric) 센서가 빌딩, 교량, 항공기 등의 구조물의 변형률을 측정하기 위하여 개발되어졌다. 기존의 광섬유 EFPl(extrinsic Fabry-Perot interferometric) 센서는 그 신호가 변형률의 변화에 따라 정현파 형태로 출력되기 때문에 변형률의 증가 또는 감소를 구별하기 어렵다. 또한 절대 변형률은 이러한 단순한 광섬유 EFPI 센서로는 측정이 불가능하다. 본 연구에서는 변형률의 크기와 방향을 측정하기 위해서 광섬유 EFPI 센서를 전반사형 탐촉자로 개조한 광섬유 TR-EFPI 센서를 구성하였다. 이 광섬유 TR-EFPI 센서의 탐촉자는 모세유리관 안에 공기간극을 이루는 단일모드 광섬유(single mode fiber)와 거울코팅 광섬유(mirror coated fiber)에 의하여 구성된다. 이 광섬유 TR-EFPI 센서의 광출력 신호로부터 변형률의 크기와 방향을 결정하기 위하여 필요한 정보를 얻을 수 있다. 광섬유 TR-EFPI 센서로부터 구한 변형률과 전기저항형 변형률 게이지에 의한 변형률을 비교하기 위하여 광섬유 TR-EFPI 센서를 구성하고 알루미늄보 위에 전기저항형 변형률 게이지와 동일한 위치에 적용하여 만능시험기를 사용하여 하중 증가-감소에 따른 변형률 측정 실험을 수행하였다. 이 실험을 통하여 광섬유 TR-EFPI 센서에 의하여 구한 변형률은 전기저항형 변형률 게이지에 의한 변형률과 잘 일치함을 확인하였다.
해수표층온도(sea surface temperature; SST)는 해양환경 변화와 해양생물의 생태활동의 특성을 파악하는데 매우 중요한 환경요소 중 하나이다. 인공위성 열적외선 영상으로는 전 세계의 해수표층온도 변화를 파악하는 데는 유용하지만, 섬들이 많고, 해안선이 복잡한 한반도 연안 해역에서는 고해상도의 해수표층온도 자료를 획득하기에는 어려운 실정이다. 하지만 인간생활에 밀접한 영향을 주고받으며 대부분의 양식장이 분포하고 있는 곳이 연안 해역이므로 상세한 해수표층온도의 변화를 파악하는 것이 매우 중요하다. 이를 위하여 본 연구는 저비용의 지상용 열적외선카메라(FLIR)를 항공기용으로 구축하여 연안 표층수온 추출 가능성을 확인하고자 하였다. 2012년 5월 23일부터 2013년 12월 7일까지 최소 8회 이상 서해 연안에 대하여 항공기 관측실험을 실시하였으며, 이때 구축된 열적외선 센서를 탑재하여 해수표층온도 추출 연구를 수행하였다. 항공기에 탑재된 열적외선 센서로부터 획득된 자료는 대기모델 및 온/습도계 센서를 이용하여 방사보정(radiometric correction)을 수행하였고, Global Positioning System (GPS) 및 Inertial Measurement Unit (IMU) 센서를 이용하여 기하보정(geometric correction)을 자동으로 수행한 후 해수 표층온도 자료를 추출하였다. 그 중 2013년 6월 25일에 관측된 항공기 해수표층온도에 대해 인공위성 및 선박 열적외선 센서를 통해 획득된 해수표층온도 자료와 비교하였으며, 선박 현장 관측 자료와는 $1^{\circ}C$ 이내 오차 범위의 해수표층온도를 획득하였다.
선체구조의 품질검사 중 가장 일반적인 방법의 하나는 비파괴검사이다. 하지만 복합소재 선체는 강화재와 수지로 구성된 여러가지 재료가 섞여 있고 또 생산환경과 작업자에 따라 FRP(Fiber-Reinforced Plastics) 제작품질에 차이가 발생할 가능성이 크기 때문에 정확한 검사평가는 쉽지 않은 일이다. 특히 FRP 선박의 경우에는 다른 구조물보다 두께가 매우 두껍고 주로 수척층 공법을 이용하기 때문에 더욱 그렇다. 초음파 탐상의 조건 중 검사체의 밀도가 매우 중요하기 때문에 본 연구에서는 FRP 선박 제작에 널리 사용되고 있는 소재와 유리섬유강화재 중량 비율로 제작된 선박의 외판을 검사체로 선정하고, Pulse-Echo 초음파 탐상기를 활용하여 GFRP(Glass Fiber-Reinforced Plastics) 선체 외판의 초음파 탐상을 위한 적정 조건을 조사하였다. 1.00 MHz, 2.25 MHz, 5.00 MHz 세 종류 탐촉자로 A-Scan을 실시하였으며 선체 외판의 두께 검사결과와 비교분석함으로써 적정 초음파 탐상 조건을 찾고자 하였다. 연구결과 탐촉자의 초음파 주파수가 높아질수록 수신자의 반사파 음향 속력을 감소시켜야 더 정도 높은 두께 측정 결과를 얻을 수 있었으며, 상대적으로 낮은 초음파 주파수 탐촉자에서 더 적은 오차가 발생함을 확인할 수 있었다.
항공기용 연료탱크는 평상시에는 연료저장 등의 단순한 기능을 한다. 그러나, 항공기 추락과 같은 긴급 상황에서는 연료탱크 구조건전성은 승무원의 생존과 직결되므로, 관련 성능의 보유 여부를 충돌충격시험을 통해 입증하도록 규정되어 있다. 충돌충격시험은 높은 충격하중으로 실패 위험이 높기 때문에 설계 초기 실물시험에서의 시행착오 가능성을 최소화하기 위한 노력이 진행되어 왔다. 실제 시험 전에 수행하는 수치해석도 그러한 노력의 일환이다. 하지만, 수치해석 결과가 설계에 반영되기 위해서는 수치해석의 신뢰성 확보가 필요하다. 본 연구에서는 회전익항공기 연료탱크의 충돌충격시험 수치해석의 신뢰성 확보를 위해 수치해석 결과와 시험 데이타 간의 비교를 수행하였다. 수치해석은 충돌전용 소프트웨어인 LS-DYNA을 사용하였고, 해석방법은 유체-구조연성해석 방법 중 ALE(arbitary lagrangian eulerian) 방법을 적용하였다. 시험데이터 확보를 위해 연료탱크 금속 피팅부에 변형률게이지를 설치하고 데이터 획득장비와 연동시켰다. 수치해석 결과로써 연료탱크 피팅부의 변형률과 응력을 계산하였다. 그리고, 실물 연료탱크로 수행한 충돌충격시험을 통하여 확보한 상부피팅의 변형률 측정값과 수치해석으로 계산된 변형률과의 오차를 평가함으로써 수치해석의 신뢰성을 제고하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.