• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.332-333
• /
• 2013

This research utilizes the modified sulfur having the low melting point which 65℃ is tries to study the strength property of the mortar according to the cure method of the modified sulfur mortar. And we try to use as basic data for investigating the curing condition of the light panel optimum utilizing the modified sulfur. We experimented by five kinds; 20℃ water curing method and 20, 40, 60, 80(℃) air dry curing method. In 3 day curing, the compressive strength was improved caused by high curing temperature. But the compressive strength was degraded caused by enhanced temperature in 7day curing and 28day curing. Therefore, the curing temperature of the modified sulfur mortar is determined that it comes 20 time case curing and the water curing is the most recommendable.

• 한국건설순환자원학회논문집
• /
• 제9권3호
• /
• pp.260-267
• /
• 2021

이 연구의 목적은 양생조건이 물-결합재비가 15%인 알칼리 활성 슬래그 기반 복합재료의 압축 및 인장거동에 미치는 영향을 실험적으로 조사하는 것이다. 이를 위하여 양생 조건을 다르게 하여 실험체를 제작한 후 압축강도와 인장실험을 수행하였다. 실험 결과 고온 양생과 기중 양생을 적용함에 따라 매트릭스의 압축강도와 균열강도는 감소한 반면 인장변형성능은 증가하는 것으로 나타났다. 또한 고온 양생과 기중 양생을 통해 복합재료의 균열 간격과 균열폭이 감소하는 것으로 나타났다.

• 대한치과기공학회지
• /
• 제14권1호
• /
• pp.91-94
• /
• 1992

This study was made to change dimension of self-curing resin by various curing technics. Specimens were fabricated 45 by 7 curing method. Six measurements(distances AB,BC,CD, AD, AC, and BD) were made of mold section and recorded with micrometer(1/20 mm). The results of the experiment were as follows : 1. The air pressure cured specimens exhibited more distoration than the bench-cured, watercured, and monomer atmosphere-cured specimens(P < 0.05). 2. The water pressure cured specimens exhibited more distoration sphere-cured specimens (P < 0.(15).

• 한국지반공학회논문집
• /
• 제28권4호
• /
• pp.43-53
• /
• 2012

경량기포토의 현장 적용에 있어 많은 요인들이 문제를 유발시킬 수 있다. 특히 온도가 경량기포토의 거동이나 강도에 상당한 영향을 미칠 수 있으나 아직까지 이에 대한 연구가 미흡한 실정이다. 따라서 본 연구에서는 현장에서 가장많이 적용되고 있는 6, 8, 10kN/$m^3$ 3가지 단위중량으로 경량기포토 공시체를 제작하여 한국의 기온 특성에 맞는 다양한 온도에서 양생시켰다. 준비된 공시체에 대해 일축압축강도시험을 실시하고, 침하거동도 같이 관찰하였다. 양생온도에 따른 경량기포토내의 공기방울의 형태 변화를 알아보기 위해 SEM을 이용한 사진촬영도 이루어졌다. 그 결과 강도, 침하, 공기방울형성 등 경량기포토의 특성에 양생온도가 영향을 미침을 확인하였다. 마지막으로 본 연구결과를 바탕으로 경량기포토의 품질을 확보할 수 있는 허용양생온도 $8^{\circ}C{\sim}25^{\circ}C$가 제안되었다.

• 한국작물학회지
• /
• 제32권2호
• /
• pp.130-136
• /
• 1987

공시품종인 Burley 21을 수확한 후 건조하고 무더운 시기에 처리하여 건조하우스의 환기시기, 환기량 및 달줄간격 등의 건조실관리에 따른 급건조방지 방법을 밝히고자 시험한 결과 요약하면 다음과 같다. 1. 건기에는 건조시 시종환기구에서 온도가 낮았고 급건엽발생도 제일 적었다. 2. 급건엽발생시기는 황변말부터 갈변말까지로 이 시기에 탈수를 지연시키는 것이 가장 중요하다. 3. 급건엽발생이 적을수록 품질 및 물리성이 양호하였다. 4. 측면을 1.5m로 충분히 환기시킨 구에서 급건엽발생이 가장 적었다. 5. 달줄간격을 좁힐수록 온도에는 크게 영향을 미치지 않았으나 온도는 높게 유지하여 급건엽발생을 크게 감소시켰다. 6. 급건엽의 내용성분은 충분히 분해가 일어나지 않았다.

• 대한치과기공학회지
• /
• 제40권2호
• /
• pp.57-62
• /
• 2018

Purpose: The aim of this study is to evaluate composite resins of indirect restorations for testing of flexural strength according to various polymerization methods. Methods: Specimen was produced a total of 40 to 10 per each group with a length 25 mm, width 2 mm, thickness 2 mm using a Teflon zig. The polymerization groups were classified into four groups. The first group proceeded with light curing only(LC group). The second group proceeded with light and heat curing(LHC group). The third group proceeded with air press and light curing(ALC group). The fourth group proceeded with air press, light and heat curing(ALHC group). Each prepared group was evaluated by flexural strength test. Statistical analysis was performed by one-way ANOVA. Post-test was performed with Tukey test. Results: The lowest in the ALC group was 119.18 MPa and the highest in the ALHC group was 168.15 MPa. There were statistically significant differences. Conclusion : The composite resin of the indirect restoration is recommended to heat curing along with the air press.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.97-100
• /
• 2004

In-place curing box for specimens is used to cure the compressive strength specimens for control in place concrete. The box if composed of insulating chamber maintaining 20$\pm$3$^{\circ}C$ of temperature, in this paper, strength and temperature history of specimens cured at in plate curing box are investigated to verify field applicability. According to test results, air temperature at measured time shows large temperature variation and below zero, whereas, inside temperature of in place curing box maintains within 20$\pm$3$^{\circ}C$ due to temperature control function. For curing condition. temperature of specimens cured at outside shows large temperature deviation. specimens lured at in-place curing box is not affected by outer temperature.

• Computers and Concrete
• /
• 제6권6호
• /
• pp.437-450
• /
• 2009

The effect of six different curing conditions on compressive strength and ultrasonic pulse velocity (UPV) of volcanic pumice concrete (VPC) and normal concrete (NC) has been studied. The curing conditions include water, air, low temperature ($4^{\circ}C$) and different elevated temperatures of up to $110^{\circ}C$. The curing age varies from 3 days to 91 days. The development in the pulse velocity and the compressive strength is found to be higher in full water curing than the other curing conditions. The reduction of pulse velocity and compressive strength is more in high temperature curing conditions and also more in VPC compared to NC. Curing conditions affect the relationship between pulse velocity and compressive strength of both VPC and NC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.183-188
• /
• 2002

When Concrete work during winter is placed, it has anxiety that concrete freeze at low temperature. As concrete's freezing cause reduction of durability, it is necessary for mixing to pay attention to Air content and W/C ratios. Accordingly, in this study, we set up three series and evaluate a frost-resistance of concrete with admixture, like fly-ash and blast-furnace slag, for early curing method and types of chemical admixture..The study is composed as; I series : Analysis for early curing method and types of chemical admixture in laboratory II series : Analysis for early curing method and types of chemical admixture in batcher plant and measured concrete' temperature. The result of this study, it was more effective the use of super-plasticizers than air entraining agent.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.109-110
• /
• 2020

In This study, we tried to review an efficient curing method in consideration of safety and constructability among the problems of winter construction. In other words, as a result of the mock-up test, the measured value of carbon monoxide was 0 ppm in the case of an electric hot air fan. Since there is no carbon monoxide, problems such as suffocation are expected to be solved. In terms of temperature characteristics, electric hot air fans exhibited high thermal efficiency performance with a slight difference in upper/lower temperatures compared to the existing ones. In the future, we plan to conduct thermal efficiency evaluation through actual site performance verification. We will propose an efficient curing method through applicability evaluation.