• 제목/요약/키워드: air borne

검색결과 236건 처리시간 0.031초

Micro-shear bond strengths of resin-matrix ceramics subjected to different surface conditioning strategies with or without coupling agent application

  • Gunal-Abduljalil, Burcu;Onoral, Ozay;Ongun, Salim
    • The Journal of Advanced Prosthodontics
    • /
    • 제13권3호
    • /
    • pp.180-190
    • /
    • 2021
  • Purpose. This study aimed to assess the influence of various micromechanical surface conditioning (MSC) strategies with or without coupling agent (silane) application on the micro-shear bond strength (µSBS) of resin- matrix ceramics (RMCs). Materials and Methods. GC Cerasmart (GC), Lava Ultimate (LU), Vita Enamic (VE), Voco Grandio (VG), and Brilliant Crios (BC) were cut into 1.0-mm-thick slices (n = 32 per RMC) and separated into four groups according to the MSC strategy applied: control-no conditioning (C), air-borne particle abrasion with aluminum oxide particles (APA), 2W- and 3W-Er,Cr:YSGG group coding is missing. The specimens in each group were further separated into silane-applied and silane-free subgroups. Each specimen received two resin cement microtubules (n = 8 per subgroup). A shear force was applied to the adhesive interface through a universal test machine and µSBS values were measured. Data were statistically analyzed by using 3-way ANOVA and Tukey HSD test. Failure patterns were scrutinized under stereomicroscope. Results. RMC material type, MSC strategy, and silanization influenced the µSBS values (P<.05). In comparison to the control group, µSBS values increased after all other MSC strategies (P<.05) while the differences among these strategies were insignificant (P>.05). For control and APA, there were insignificant differences between RMCs (P>.05). The silanization decreased µSBS values of RMCs except for VE. Considerable declines were observed in GC and BC (P<.05). Conclusion. MSC strategies can enhance bond strength values at the RMC - cement interface. However, the choice of MSC strategy is dependent on RMC material type and each RMC can require a dedicated way of conditioning.

바닥판의 동적특성에 따른 소음진동 저감성능에 관한 연구 (A Study on the Noise and Vibration Reduction Effect Depending on Dynamic Property of Slab)

  • 황재승;김선우;송진규;서재란
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2004년도 봄 학술발표회 논문집
    • /
    • pp.259-266
    • /
    • 2004
  • The vibration of slab causes a sudden change of air pressure in the interface between slab and air to create structure home sound. Floor impact noise induced from the vibration of slab became one of the hottest social issues in these day, and it took the biggest parts of the cause of damage in environmental dispute. Because the structure borne sound of slab is different from the dynamic characteristic of slab, it is required more precise vibroacaustic analysis. In this study, we was trying to understand by what mechanism the slab noise is induced from the slab vibration and the relationship between the dynamic propety of slab and the noise is shown by the numerical simulation.

  • PDF

저용량 PM2.5 도입부 개발 및 성능평가 (Design and Performance Evaluation of Low-Volume PM2.5 Inlet)

  • Kim Dae-Seong;Hong Sang-Beom;Lee Jae-Hun;Lee Gyu-Won
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2003년도 춘계학술대회 논문집
    • /
    • pp.251-252
    • /
    • 2003
  • Most particles capable of reaching the thoracic region of humans are in the size range below 10$\mu$m in diameter. Particles with a diameter smaller than 2.5 $\mu$m are deposited in large amounts in the alveolar region during mouth inhalation. The hazard caused by fine particles depends on their chemical composition and the site within the human respiratory system where they are deposited(Hinds, 1982). Therefore, the concentration of air borne fine particles is an important parameter for the evaluation of the degree of hazard in an atmospheric environment. (omitted)

  • PDF

피치배열을 이용한 타이어 패턴노이즈 저감 (The reduction of Tire pattern noise by using pitch sequence)

  • 황성욱;방명제;김선주;조춘택
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.611-614
    • /
    • 2005
  • It is well known that tire tread pattern has much influence on the tire pattern noise. The paper describes the method of pattern noise reduction by using the pitch sequence, both on the smooth asphalt roads and on the trenched concrete roads. The noise of tire is classified as either airborne or structure borne noise. Pattern noise through the airborne is considered as a major noise source at high speeds. As block impacting and air pumping by tread patterns are major noise source, tire pattern noise can be greatly influenced by optimal pitch sequence. The goal of this paper is to provide tire engineers with pitch sequence to reduce pattern noise effectively.

  • PDF

부식에 의한 가선재 수명특성에 관한 연구 (The Effect of Corrosion on the Fatigue Life of Catenary Wire)

  • 김용기;장세기;이덕희;정병철
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2001년도 추계학술대회 논문집
    • /
    • pp.139.1-146
    • /
    • 2001
  • Contact lines are necessary to supply electric locomotives with electric power. As most railways are gradually electrified with modernized electric cars, the demand for catenary wires and their facilities are also increased. Catenary wires made by metallic materials are generally used in the open air. They are exposed to the marine area with air-borne salt or severely polluted industrial area with much corrosive emission gases depending on the railway locations. In urban area, acid rain may cause a degradation of catenary wire system. Corrosion of catenary wires can make their actual lifetime shorter than that originally designed. Thus, the messenger wires, a kind of catenary wire system, were investigated with respect to corrosion, which include new and the used one collected at the field. They are also vibrated with some amplitude everytime the train passes through the railway. The frequent cyclic load on the wire any result in a fatigue damage, Surface damage by corrosion can make fatigue crack initiate with ease. In the present study, the fatigue life of the used wire was measured 40 to 50% shorter than that of new one in average.

  • PDF

섬유질유물의 포화(Degradation)에 영향을 주는 요인들에 대한 연구

  • 배상경
    • 보존과학연구
    • /
    • 통권11호
    • /
    • pp.1-9
    • /
    • 1990
  • The environmental controls for good conservation of all textile materials are follow as :1) Special RH conditions on textiles keep to the usually advocated 50∼55%.2) The effect of the temperature is too small to worry about in the applicable range, that is $20^{\circ}C$.3) It is important to keep soiling by air borne dirt to a minimum by an air filter or putting textiles in cases.4) Sulphur dioxide must be rekoved by an activated carbon filter or a water spray. And this concentration below $50\muGm^3$ can be regarded assatisfactory.5) Oxygen plays a part of deterioration proceses. The effect of nitrogend andinert gases in sealed show cases should be further studied.6) Ozone is detrimental to textiles. It can be removed by activated carbonfilter.7) The removal of UV radiation and blue light can be expected to increase the lifetime of dyeing and strength of fiber.50 lux is suggested for sensitive textile materials.

  • PDF

교통량 과밀 도로주변의 토양과 가로수, 대기중 Pb, Cu, Zn 중금속 농도와 그 상관성에 관한 연구 (Pb, Cu, Zn Contaminants and Their Correlation of Soil, Leave and Bark of Ginkgo. B and Ambient Air Adjacent to a Heavy Traffic Road Side)

  • 박기학
    • 한국환경보건학회지
    • /
    • 제18권2호
    • /
    • pp.19-25
    • /
    • 1992
  • The study was carried out to investigate the correlation between the heavy metals emitted by the motor vehicles with the heavy traffic road side environment (soil, leave, bark, ambient air). The Pb, Cu, Zn contents in road side soil sand leaves, barks from Ginkgo, biloba and ambient air adjacent to the heavy traffic road side from June to August, 1992 Suwon city were analyzed by Atomic absorption spectrometry and Inductively coupled plasma emission spectrophotometry. The results were as follows: 1) The high levels of heavy metals concentration were Pb, at city-terminal in soil (186 $\mu$g/g), Cu, at city-terminal in soil (221 $\mu$g/g), Zn, at city-terminal in ambient air (252 $\mu$g/m$^{3}$). 2) The low leves of heavy metals concentration were Pb, at North-gate in ambient air (1.65$\mu$g/m$^{3}$), Cu, at North-gate in ambient air (4 $\mu$g/m$^{3}$), Zn, at North-gate in ambient air (15.31$\mu$g/m$^{3}$). 3) The regional distribution of Pb, Cu, Zn in road side soils, leaves and barks from Ginkgo, biloba, ambient air show high levels in turn, city4erminal, Guan Sean Dong, South gate, North gate. 4) The concentration of heavy metals (Pb, Cu, Zn) in soils, leaves, barks, ambient air was highly correlated with the traffic volume of the sampling sites (r=0.64~0.96). To conclude that the high levels of Pb, Cu, Zn contaminations were positively related to motor vehicles-borne pollutants and road side soils, trees, ambient air adjacent to a high density building area with low road coverage and heavy traffic volume were reflected strongly by the hazardous pollutants emitted by motor vehicles.

  • PDF

남극 킹조지섬 포케이드 빙하의 헬리콥터 및 지상 레이다 탐사 (Helicopter-borne and ground-towed radar surveys of the Fourcade Glacier on King George Island, Antarctica)

  • 김기영;이주한;홍명호;홍종국;손호웅
    • 지구물리와물리탐사
    • /
    • 제13권1호
    • /
    • pp.51-60
    • /
    • 2010
  • 남극 킹조지섬 포케이드 빙하의 저면 지형과 내부 모습을 규명하기 위해서 2006년 11월에 4개 조사측선을 따라 헬리콥터 및 지상 레이다(GPR) 탐사를 실시하였다. 혼합위상인 단채널 지상 GPR 자료에 적용한 신호 역대합, f-k 구조보정 속도분석, 유한차분 깊이구조보정 등의 처리과정을 통하여 수직 분해능 향상, 속도함수 추출, 선명한 깊이영상 작성 등을 효과적으로 수행하였다. 헬리콥터 GPR 자료의 경우, 구조보정속도는 공기와 얼음의 2층모델을 가정한 평균제곱근속도로 구하였다. GPR 단연은 울퉁불퉁한 빙저면, 빙하 내부의 미끄러짐면, 운집된 산란잡음 등의 특징적 모습을 보여준다. 기반암까지의 최대 깊이는 포케이드 빙하와 목지들로우스키 빙하 사이의 경계능선 남동사면에 인접한 빙하 골짜기에서 79 m가 넘는다. 빙하 기저수 위에 복잡한 형태의 굴과 수 m의 폭을 갖는 독립된 빈 공간들의 존재를 지상 GPR 자료로부터 해석하였다. 빙하 중단 부근의 GPR 영상은 포토소만의 빙산 형성기작과 관련된 미끄러짐면, 단열, 단층 등의 구조를 보여준다.

Air Pollution Risk Prediction System Utilizing Deep Learning Focused on Cardiovascular Disease

  • Lee, Jisu;Moon, Yoo-Jin
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권12호
    • /
    • pp.267-275
    • /
    • 2022
  • 이 논문은 대기오염의 심장병에 대한 위험도를 예측하기 위하여 Keras를 활용한 Deep Neural Network Model 시스템을 제안하였다. 연구 데이터로 서울열린데이터광장의 서울시 기간별 시간평균 대기환경 데이터 18,000개의 데이터 셋을 분석하여, 심장병 질병에 미치는 영향에 대한 정보를 얻을 수 있었다. 이 모델은 각각 8개의 노드를 가진 3개의 은닉층, Sigmoid, Binary_crossentropy, Adam과 Accuracy를 사용했을 때 88.92%의 높은 정확도를 얻을 수 있었다. 이 시스템은 각 지역별 대기오염에 따른 심장병 질병 위험도를 예측하여 유용한 질병 예방의 지표로 활용 가능하다고 사료되고, 대기오염과 미세먼지의 각 성분이 유해질환에 미치는 영향에 대한 데이터만 존재한다면 어떠한 호흡기 질환이든 위험도 예측 결과를 알 수 있다는 것에 의미가 있다. 이 시스템을 더욱 발전시킨다면, 마스크 및 공기정화제품 생산기업에게 유용한 정보를 제공하여 기업의 기술개발에 도움이 될 수 있다고 사료된다.

한국원자력연구원 새빛연료과학동 굴뚝방출 방사능 평가 (Evaluation of Radioactive Stack Air Effluents from the Advanced Fuel Science Building at KAERI)

  • 장시영;김봉환
    • Journal of Radiation Protection and Research
    • /
    • 제33권3호
    • /
    • pp.121-126
    • /
    • 2008
  • 한국원자력연구원 새빛연료과학동의 굴뚝에서 대기로 방출되는 배기의 방사능을 측정, 분석 및 평가하였다. 동 시설에서는 연구용원자로 하나로의 핵연료를 생산하는 외에 첨단 핵연료를 연구하고 있으며 환경을 보호하기 위하여 시설외부로 방출되는 굴뚝배기 방사능 감시기를 연속 가동하고 있다. 2008년 1월 $\sim$ 3월동안 굴뚝배기 방사능 감시기의 밀리포어 집진+CY8필터에 포집된 방사능과 핵종을 정기적으로 측정하고 핵종을 분석한 결과, 천연방사성 핵종인 라돈($^{222}Rn$)과 토론($^{220}Rn$)의 단 반감기의 딸핵종들 및 40K이 미량으로 검출되었으나 72시간 이내에 계측기의 최소검출방사능(MDA) 이하로 붕괴하였으며 우라늄 핵종은 검출되지않았다. 이로서 한국원자력연구원 새빛연료과학동으로부터 우라늄 핵종은 대기중으로 방출되지 않는 것으로 평가되었다.