• Journal of Microbiology and Biotechnology
• /
• 제10권5호
• /
• pp.628-631
• /
• 2000

The timing of poly(3-Hydroxybutyrate) (PHB) biosynthesis was controlled by varying the agitation speed of a stirred tank fermentor during the pH-stat fed-batch culture of recombinant Escherichia coli strain GCSC 6576 harboring pSYL107. Using a concentrated whey solution containing ca. 200 g/l lactose as the nutrient feed, the PHB content was only 57% after 35h due to volumetric limitation of the fermentor. However, by limiting the oxygen by maintaining the agitation speed at 300 rpm, the final PHB content increased to 70% after 70h with a cell concentration of 15 g/l. When the agitation speed was increased up to 500 rpm, a cell concentration of 31 g/l with 80% PHB was obtained after 52h. A further increase in the maximum agitation speed increased the cell concentration, PHB concentration, and PHB productivity, however, the PHB content decreased to 56-58%.

• 산업기술연구
• /
• 제24권B호
• /
• pp.171-176
• /
• 2004

The effects of agitation and aeration for exopolysaccharide(EPS) production through batch cultivation of an Enterobacter sp. isolated from the composter were investigated. During the EPS fermentation under conditions of constant agitation speed from 200 to 900 rpm and constant aeration rate of 0.5-2.5 vvm, the low yields of EPS(4.8-5.2g/L) was observed as the viscosity increase of culture broth. With the stepwise increases in agitation speed and aeration rate, the EPS production and the viscosity of EPS were increased 1.3~1.4 times and 2.3~3.6 times higher than those of the fixed conditions, respectively. Therefore, these stepwise increases were considered as the key operating parameters for enhancing EPS production. The max. EPS(6.8g/L) and viscosity(14,000cp) were obtained when the agitation speed was increased from 300 to 900 rpm for 54hrs at 1.5 vvm.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.334-337
• /
• 2000

Extracellular polysaccharide was produced by Pseudomonas elodea NK-2000 under nitrogen limitation and aerobic condition, The effect of agiatation speed on cell growth and production of exopolymer was investigated. The agitation speed of 7.5 L fermentor ranged from 200 to 500 rpm. Production of exopolymer increased with higher agitation speed. Maximal cell growth and production of exopolymer from 2% glucose were 3.35 g/l and 3.80 g/l, respectively when agitation speed was 400 rpm.

• 자원리싸이클링
• /
• 제27권1호
• /
• pp.45-54
• /
• 2018

플라이애시의 부유선별 과정에서 교반속도와 공기주입량과 같은 기계적 요소 변화에 따른 영향을 알아보고자 본 연구를 실시하였다. 본 연구에서는 미연탄소 함량이 약 3.4 ~ 3.7% 수준인 화력발전소 플라이애시를 사용하였다. 대표적인 부유선별의 선별 요소인 pH, 교반속도, 포수제 첨가량, 기포제 첨가량 변화에 따른 영향을 살펴보았을 때, Safflower oil을 포수제로 사용하여 첨가량을 800 g/ton, pH 7, 교반속도 1,200 rpm, 기포제 첨가량이 400 g/ton였을 때, 미연탄소 회수율과 미연탄소 함량이 각각 63%, 34%로 나타났다. 이 때 부상물 SEM/EDS 분석을 통해 알아본 결과, 구형의 플라이애시 미립자가 미연탄소 내에 고용되거나, 광액 내에 가라앉지 못하고 기포와 함께 부유함으로써 미연탄소의 함량을 낮추는 것으로 나타났다. 교반속도와 공기주입량과 같은 기계적 요소를 변화시킨 실험에서는 공기주입량 8L/min, 교반 속도 900 rpm에서 미연탄소 회수율 74%, 미연탄소 함량 67%인 것으로 나타났다. 이는 낮은 교반속도와 추가 공기주입으로 인하여 광액 내 와류의 강도가 낮아져, 미립의 플라이애시 입자가 미연탄소와 함께 부유되는 현상을 방지됨으로써, 미연탄소 회수율과 미연탄소 함량이 향상된 것으로 나타났다. 또한, 교반속도와 공기주입량을 각각 800 rpm, 6 L/min으로 설정하였을 때 미연탄소 회수율과 미연탄소 탄소함량이 각각 80%, 70%로 향상되어 가장 우수한 것으로 나타났다.

• KSBB Journal
• /
• 제15권3호
• /
• pp.280-284
• /
• 2000

The simple imcroprocessor device was provided for the control of dissolved oxygen(DO) level. The DO analog signal output from fementer was used as a measurement variable and the agitation speed of fermenter was used as a manipulatio variable. Agitation speed was manipulated to maintain DO level above 10% of saturation condition during cell growth period with microprocessor. Since the experimental resultsshowed that the DO level was maintained above 10% and agitation speed was inverse proportional to DO level ithis simple control device can be used for the DO control of fermenter.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.571-575
• /
• 2005

A simple, but effective on-line method for estimating the mycelial cell mass concentration from agitation speed data, a most readily-available process variable, has been developed for DO-stat cultures of Agaricus blazei. The dynamic change of dissolved oxygen concentration (DOC) in the initial transient period and the change in yield were considered in the development of the estimation algorithm or estimator. Parameters in the estimation algorithm were calculated from the agitation speed data at 20% of DOC. The proposed estimator could accurately predict the cell mass concentration regardless of DOC levels in the tested range of $10{\sim}40%$, showing a good extrapolation capability.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.192-195
• /
• 2002

Effect of aeration rate and agitation speed on cell growth and the production of heteropolysaccharide-7 (PS-7) by Beijerinckia indica was investigated. Aeration rate and agitation speed in a 7L bioreactor ranged from 0.5 to 1.5 vvm and from 300 to 500 rpm, respectively. Higher agitation speed with an aeration rate of 0.5 vvm in the bioreactor resulted in maintenance of higher concentration of dissolved oxygen in the medium, which enhanced the production of PS-7. In this study with a 7L bioreactor, maximal production of PS-7 was 11.0 g/L and its conversion rate from 2% (w/v) glucose was 0.55 when the aeration rate and agitation speed were 1.0 vvm and 500 rpm, respectively. Proper aeration rate and agitation speed might enhance the production of PS-7 as well as reduce the time to reach maximal production.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권2호
• /
• pp.164-167
• /
• 2006

The influence of temperature and agitation on the growth of Escherichia coli expressing hepatitis B core antigen (HBcAg) in stirred tank bioreactor were investigated. The highest specific growth rate for E. coli$(0.844 h^{-1})$ was achieved at a temperature of $37^{\circ}C$ and an agitation speed of 250 rpm. The activation energy for the growth of the E. coli strain W3110lQ in the stirred tank bioreactor was estimated to be 11 kcal/mol. The highest protein yield was achieved at a temperature of $44^{\circ}C$ and an agitation speed of 250 rpm. The relative protein concentration at $44^{\circ}C$ is 30 and 6% higher compared to that at 30 and $37^{\circ}C$, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제3권4호
• /
• pp.292-297
• /
• 1993

Aspergillus niger No. PFST-38 was grown on complex media in 30L agitated fermentors at various aeration rates and stirrer speeds. We could correlate the mixing time as a function of the Reynolds number and the apparent viscosity, as follows. ${\theta}_M=2.95\;\NRe^{-0.52},\;{\theta}_M=1.88\;{\eta_a}^{0.57}$ Also, the effects of the apparent viscosity (${\theta}_a$), the impeller rotational speed (N), the air flow rate ($V_s$), and the mixing time (${\theta}_M$) on the oxygen transfer coefficient, $K_L a$ were determined experimentally, and equated as follows. $K_La=12.04N^{0.88}Vs^{0.71}{n_a}^{-0.83},\;K_La=30.2N^{0.88}Vs^{0.71}{\theta_M}^{-1.45}$ $K_La$ increased as the agitation speed and the air flow rate increased. The rate of $K_La$ increase was dependent more on the rotational speed of impeller than on the air flow rate. The glucoamylase production increased with the increase of the agitation speed upto at 500 rpm and increased with the increase of air flow rate upto at 1.0 vvm. The values calculated from the above equation confirmed that the experimental maximum production of glucoamylase was achieved when the $K_La$ and the apparent viscosity of the broth were $260\;hr^{-1}$ and 1800 cps, respectively.

• KSBB Journal
• /
• 제16권3호
• /
• pp.307-313
• /
• 2001

The effects of agitaion and aeration on mycelial growth, exo-polysaccharide (EPS) production, and substrate consumption upon the submerged cultivation of G. lucidum were investigated, and the batch kinetics of the EPS fermentation of G. lucidum were interpreted as function of agitation speed and aeration rate. In a 2.6 L jar fermenter system, the optimum agitation speed and aeration rate for EPS production were determined to be 400 rpm and 1.0 vvm, respectively. The maximum production of EPS obtained was 15 g/L. The logistic model for mycelial growth fitted the experimental data better than that determined by the Monod and the two-thirds power models. The Luedeking-Piret equation adequately modelled the kinetic data obtained for product and substrate.