• 한국지역지리학회지
• /
• 제6권2호
• /
• pp.1-19
• /
• 2000

본 연구는 중부지역의 중심지로 발전하고 있는 대전광역시를 대상으로 노령화 지구의 공간적 분포 패턴을 분석하고자 하였다. 그 결과 노령화 지구는 대전광역시 CBD지역과 CBD인접지역, 그리고 주변지역간에 뚜렷한 차이를 나타내고 있으며, 그 분포에 있어서도 양극화 현상이 뚜렷함을 확인하였다. 그리고 인구감소지구는 노령화지구와 대체로 중복되어 있고, 비노령인구의 전출에 의하여 노령인구비율이 높아지고 있으며, 인구증가지구는 노령화 지구와 전혀 중복되어 나타나지 않고, 비노령인구의 전입에 의해 노령인구비율이 낮아지고 있다. 인구이동에 의한 노령인구의 증가여부를 확인하기 위하여 각 그룹별로 연령 코호트 분석방법을 이용하여 노령화 지구의 출현요인을 분석한 결과, 인구노령화의 진행 은 인구의 사회적 증감률 변화와 매우 밀접하게 관련되어 있고, 특히 비노령인구의 전출에 의해 노령인구비율이 높아지고 있음을 확인할 수 있었다. CBD지역과 CBD인접지역을 포함한 중심시가지에서는 결혼, 새로운 주택취득에 의한 세대분리 등의 전출, 즉, 비노령인구의 전출이 인구노령화를 촉진하는 주요인이 되고 있고, 반면 주변지역에서는 비노령인구의 지구의로의 전출뿐 아니라 새롭게 노령인구로 편입되어져 가는 연령층 인구와 사망률의 저하에 따른 평균수명의 연장으로 인한 노령인구의 절대적 증대가 인구노령화를 촉진하는 요인으로 작용하고 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.119-122
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymer insulators are a relatively new technology, but their expected life is still unknown. Therefore these estimating technique are very important. Their life time is related to weathering and operating condition. Multi-aging test is requested because aging factor is occurred by multi-aging than unique aging. The aging test about polymer insulators have mainly carried out by IEC 61109. This paper presents multi-stress chamber experiments and tracking wheel test to examine the tracking and erosion performance of polymer insulator for transmission. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs, including the nature of interfaces in insulation design. We have investigated IEC 61109 Annex C (5000h aging test) and CEA tracking wheel test as test methods of artificial accelerated aging. The aging degree of polymer insulator is estimated by leakage current, measurement of hydrophobicity degree, damage conditions of insulator surface, withstand voltage test etc.

• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.1-9
• /
• 2005

본 연구는 재생 아스팔트 혼합물의 취 약 특성을 파악하고 이를 보완하기 위한 기초연구이다. 본 연구의 목적은 재생혼합물 내의 신 구 재료에 묻어 있는 바인더의 노화상태를 균등하게 할 수 있는 여러 가지 혼합방법을 제안하고 바인더의 노화특성을 개선하기 위한 방안을 제시하는 것이다. 재생혼합물의 굵은골재 및 매트릭스의 바인더 노화특성 분석은 Gel-permeation chromatography(GPC)를 통해 수행되었다. 재생혼합물 내 바인더의 노화상태 분석을 위한 혼합물 제조에는 원형골재(13mm 강자갈)가 굵은골재로 사용되어 RAP 굵은골재와의 구분이 용이토록 하였다. GPC를 통한 재생혼합물 내 바인더의 노화상태를 분석한 결과 신 구 바인더의 노화 정도에 차이가 있음을 확인하였다. 따라서 이를 개선하기 위해 본 연구에서는 5가지 혼합방법(AE)을 검토하였으며 D방법(RAP과 신규바인더를 선 비빔 후 신규골재 투입)에 의한 혼합방법의 개선으로 재생혼합물 내의 노화 정도의 차이가 크게 작아지는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제11권2호
• /
• pp.53-61
• /
• 1993

One of the most interesting and promising steel groups considered for the rocket motor case, aircraft and aerospace component is the maraging(martensitic plus aging) nickel steel, developed by International Nickel Company in 1960. This material attains a very high strength with good fracture toughness by simple heat treatments which do not involve a quenching. Full strength can be obtained by "maraging" at 480.deg. for 3 hours for the 18% Ni maraging steel. The effect of heat treatments was considered on the residual stress field of 18% Ni maraging steel weldments. In experiments, various heat treatments such as stress relieve heat treatment, aging and solution heat treatment were carried out of the GTA weldments and the residual stresses were measured by using the hole drilling method. Whereas the conventional pattern of residual stress shows the stresses to be maximum along the weld centerline with tensile stress extending into the heat affected zone, the pattern in maraging steels shows the centerline stress to be compressive. After welding, a series of aging, solution heat treatment and solution heat treatment plus aging treatment were carried out and the residual stresses were measured to reveal that these heat treatments almost completely remove the welding residual stresses.

• 한국실내디자인학회논문집
• /
• 제14권3호
• /
• pp.156-164
• /
• 2005

Like other countries undergoing the aging of the population, increases in the aged population have raised serious issues in Korea. The proportion of elderly will be foreseen over $14\%$ of population in 2019, over $20\%$ in 2026 in korea. Due to the rapid increasing in the aged population, it calls for social countermeasures urgently, And recent researches about attitude to the aged find out in general negative attitude to the aged of other generations. It is thought desirable that comprehension to the aged of the commonalty should be educated on the school basis or a variety of informal ways. The study aims to determine the space formation of the senior simulation center that suggest to be considered for the effective education and preparation for the aging of all social members, particularly for the younger generation. In such space formation, it is important to work out a plan of efficiency education according to the systematic environmental setting with a focus on the minimization of problematic behaviors and living disabilities of aging, as interactive experiences gain malfunctions by aging. This study is expected to promote a focus on the integration of the whole generations and improved design management for the environment of a welfare policy for the aged.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.263-270
• /
• 2012

This study investigates the effect of heat treatment on the mechanical properties of a forged Ni-based superalloy called Nimonic 80A. Nimonic 80A ingot samples were fabricated by vacuum spray casting to achieve a fine and homogenized microstructure. The ingot samples were subsequently hot-forged with the diameter of 220 mm at 1373 K. From the center to the surface of the forged Nimonic 80A, its average grain size decreased and its micro-Vickers hardness increased slightly. Solution treatment was carried out at 1353 K with 8 hours of air cooling followed by aging treatment, which was carried out in the range of 873-1073 K with various times from 0.5 to 256 hours. To set the optimum aging conditions, micro-Vickers hardness tests were performed. The maximum hardness value of 388.0 Hv was obtained by aging at 973 K for 32 hours. Also, tensile tests were performed for optimum aging conditions at room temperature and 873 K. The results can be used effectively to perform reasonable heat treatment of Nimonic 80A superalloy.

• 한국축산식품학회지
• /
• 제39권4호
• /
• pp.655-667
• /
• 2019

The present study aimed at investigating the effects of dry- and wet-aging methods on flavor compounds and sensory properties of low fat Hanwoo beef muscles. All the beef samples were obtained from 2-grade carcasses of Hanwoo cows. The beef samples used in the dry- and wet-aging methods were prepared in the forms of quarter beef (bone-in) and cuts (boneless), respectively. The dry-aging was carried out at $2^{\circ}C-4^{\circ}C$ and humidity of 65%-85%, while the wet-aging was done at $1^{\circ}C$ for 0, 20, 40, and 60 d. At each aging time, three muscles: longissmus thoracis (LT), glutaeusmedus (GM) and semimembranosus (SM) were taken from the corresponding quarters and cuts, and used for the flavor compounds and sensory analyses. Results showed that both aging methods significantly increased the concentrations of flavor compounds and total amount of all classes of the flavor compounds as the aging time increased (p<0.05). In the dry-aging method, the GM and SM muscles presented significantly higher total amounts of pyrazines and sulfur-containing compounds compared to the LT muscle (p<0.05). Both the aging methods improved the eating quality attributes, indicating by increased scores of sensorial attributes with increased aging time for all the muscles studied (p<0.05). However, compared to the wet-aging, the dry-aging method resulted in significantly higher scores of tenderness and flavor for the GM and SM muscles after 40 to 60 d. Thus, postmortem aging, especially the dry-aging method could be used to improve eating quality attributes (tenderness and flavor) of low fat beef muscles such as GM and SM.

• 대한안전경영과학회지
• /
• 제8권2호
• /
• pp.81-90
• /
• 2006

As aging society makes rapid progress, various social problems arise. The drop of productive labor and the increase of welfare cost can be taken as examples. From this point of view, a use of aged labor is a matter of great Important to national productivity improvement. But, the participation rate of the aged in economical activity amounts to 49.8 percent and their unemployment rate does 2.1 percent. The purpose of this paper is to analyze the deterioration of skill and the lowering of adaption to new working environments due to aging. Since the aging effect is closely related to worker's productivity, it should be properly measured and analyzed. The coordination tester is used to find out activity limitations. Experimental results show that the expert skill of the workers can be improved through the effective of their experience. Therefore we can say that some operation is not influenced by aging.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1948-1950
• /
• 2000

Polymeric composite insulators have been in use for outdoor insulation. However, our knowledge about their long-term performance in an outdoor environment is still very limited. Especially, these insulators are subjected to the environmental stress such as ultraviolet radiation, electrical stress, mechanical load, etc.. Hence, in this paper, we simulated the factors having influence on aging of polymer insulators using the combined aging test chamber. In order to evaluate an aging characteristics with time, we measured leakage current on these insulators to make out the degree of aging.

• 대한간호학회지
• /
• 제42권3호
• /
• pp.311-321
• /
• 2012

Purpose: This study was designed to construct and test a structural equation modeling on specific domain health status and the Selection Optimization Compensation (SOC) strategy affecting successful aging in elderly people. Methods: The model construction was based on the SOC model by Baltes and Baltes. Interviews were done with 201 elderly people aged 65 or older. Interview contents included demographics, functional health status, emotional health status, social health status, SOC strategies, and successful aging. Data were analyzed using SPSS 15.0 and AMOS 7.0. Results: Model fit indices for the modified model were GFI=.93, CFI=.94, and RMSEA=.07. Three out of 7 paths were found to have a significant effect on successful aging in this final model. Functional health status had a direct and positive effect on successful aging. Emotional health status influenced successful aging through SOC strategies. Conclusion: This study suggests that interventions for improving functional health status and for strengthening SOC strategies are critical for successful aging. Continuous development of a variety of successful aging programs using SOC strategy is suggested.