• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.46-52
• /
• 2014

PURPOSE. The aim of this study was to evaluate the interface accuracy of computer-assisted designed and manufactured (CAD/CAM) titanium abutments and implant fixture compared to gold-cast UCLA abutments. MATERIALS AND METHODS. An external connection implant system (Mark III, n=10) and an internal connection implant system (Replace Select, n=10) were used, 5 of each group were connected to milled titanium abutment and the rest were connected to the gold-cast UCLA abutments. The implant fixture and abutment were tightened to torque of 35 Ncm using a digital torque gauge, and initial detorque values were measured 10 minutes after tightening. To mimic the mastication, a cyclic loading was applied at 14 Hz for one million cycles, with the stress amplitude range being within 0 N to 100 N. After the cyclic loading, detorque values were measured again. The fixture-abutment gaps were measured under a microscope and recorded with an accuracy of ${\pm}0.1{\mu}m$ at 50 points. RESULTS. Initial detorque values of milled abutment were significantly higher than those of cast abutment (P<.05). Detorque values after one million dynamic cyclic loadings were not significantly different (P>.05). After cyclic loading, detorque values of cast abutment increased, but those of milled abutment decreased (P<.05). There was no significant difference of gap dimension between the milled abutment group and the cast abutment group after cyclic loading. CONCLUSION. In conclusion, CAD/CAM milled titanium abutment can be fabricated with sufficient accuracy to permit screw joint stability between abutment and fixture comparable to that of the traditional gold cast UCLA abutment.

• Restorative Dentistry and Endodontics
• /
• 제28권2호
• /
• pp.127-133
• /
• 2003

The object of this study was to compare the microleakage between various composite resin systems of multistep, one-bottle, and self-etching systems using electrical conductivity. After making class V cavities ($4{\times}3{\times}1.5{\;}mm$ around CEJ), they were bulk filled with three kinds of resins of A3. Teeth were storaged in a saline solution for one day, after then, they were finished and polished using Sof-Lex system. Another stress of thermocycling was made for 500 times from $5^{\circ}{\;}to{\;}55^{\circ}C$ with each dwelling time of 10 seconds. Electrical conductivity (microamphere, $\mu\textrm{A}$) was checked four times: before and after cavity preparation, after filing, after thermocycling. One-way ANOVA and 95% Scheffe Post Hoc test was used for checking any statistical difference among groups. Another 95% Paired Samples T-test was also used for estimating any significant difference within group after cavity filling or thermocycling. The results were as follows: 1 Every specimen showed various range of microleakage after filing. There was, however, no difference between composite resin systems. 2. All composite resin systems showed marked increase in microleakage with a thermocycling (p<0.05), there was, however, no difference between composite resin systems. 3. Although there was no significant difference between groups (p=0.078), one-bottle and self-etching systems seemed to be unstable than multistep system. Within the limits of this study, it was concluded that much more consideration should be needed when using thermally unstable one-bottle and self-etching systems that have multi-advantages from simplified step. More studies will be needed to solve these kinds of problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.602-603
• /
• 2007

In this paper, the RCF method is applied to analyze small signal stability of power systems including thyristor controlled FACTS equipments such as SVC. The eigenvalue sensitivity analysis algorithm in discrete systems by the RCF method are presented and applied to the power system including SVC. As a result of simulation, the RCF analysis method is very powerful to calculate the newly generated unstable oscillation modes precisely after periodic switching operations of SVC. Also the RCF analysis method enabled to precisely calculate eigenvalue sensitivity coefficients of dominant oscillation modes after periodic switching operations. These simulation results are very different from those of the conventional continuous system analysis method such as the state space equation method.

• Journal of Gastric Cancer
• /
• 제24권2호
• /
• pp.172-184
• /
• 2024

Purpose: The original eCura system was designed to stratify the risk of lymph node metastasis (LNM) after endoscopic resection (ER) in patients with early gastric cancer (EGC). We assessed the effectiveness of a modified eCura system for reflecting the characteristics of undifferentiated-type (UD)-EGC. Materials and Methods: Six hundred thirty-four patients who underwent non-curative ER for UD-EGC and received either additional surgery (radical surgery group; n=270) or no further treatment (no additional treatment group; n=364) from 18 institutions between 2005 and 2015 were retrospectively included in this study. The eCuraU system assigned 1 point each for tumors >20 mm in size, ulceration, positive vertical margin, and submucosal invasion <500 ㎛; 2 points for submucosal invasion ≥500 ㎛; and 3 points for lymphovascular invasion. Results: LNM rates in the radical surgery group were 1.1%, 5.4%, and 13.3% for the low-(0-1 point), intermediate- (2-3 points), and high-risk (4-8 points), respectively (P-fortrend<0.001). The eCuraU system showed a significantly higher probability of identifying patients with LNM as high-risk than the eCura system (66.7% vs. 22.2%; McNemar P<0.001). In the no additional treatment group, overall survival (93.4%, 87.2%, and 67.6% at 5 years) and cancer-specific survival (99.6%, 98.9%, and 92.9% at 5 years) differed significantly among the low-, intermediate-, and high-risk categories, respectively (both P<0.001). In the high-risk category, surgery outperformed no treatment in terms of overall mortality (hazard ratio, 3.26; P=0.015). Conclusions: The eCuraU system stratified the risk of LNM in patients with UD-EGC after ER. It is strongly recommended that high-risk patients undergo additional surgery.

• Journal of Nutrition and Health
• /
• 제31권2호
• /
• pp.179-191
• /
• 1998

The satisfaction of elementary school children and their parents with the school lunch program by foodservice system was assessed by questionnaire. 787 (347 male, 417 female) 5th grade elementary school children and 761 parents participated. Foodservice systems of the schools were of 4 types : central/commissary ; satellite /commissary ; conventional/contracted ; and delivery/contracted. The most joyful mealtime for children was identified as lunch because of eating with friends. Satiety and leftovers after lunch varied according to the foodservice system. For example , there was less satiety in the contracted system and more leftovers in the delivery system than in the others, Foods tasted better in the commissary system than in the contracted one. The contacted system , especially the delivery/contracted system, was poor for keeping rice and soup hot. The children's food habits such as eating a greater variety of foods and good table manner were improved through the school munch program. Most parents well understood the main purpose of the school lunch program to be a source of education on nutrition and table manner, as well as a way in which to provide the same meals to all students and save the time & work needed to prepare home lunches. Parents claimed that hygiene, taste, good nutrition and food amount should be improved. This was especially true for hygiene in the commissary system and taste in the contracted system. Furthermore, they stressed that better taste and hygiene are the most important criteria for good school foodservice systems. In conclusion, parents wanted the school lunch program should be selected with consideration of children's preference such as by periodical food preference tests. A nutrition education program should also be provided to correct bad food habits of childrens.

• Journal of Chest Surgery
• /
• 제46권1호
• /
• pp.72-75
• /
• 2013

Percutaneous vertebroplasty is a relatively easy and minimally invasive procedure used in treating vertebral fractures. However, the procedure has many complications, one of which is bone cement leakage, which happens frequently. Leakage to the paravertebral venous system, in particular, may lead to especially devastating consequences. Here we report a case of a 65-year-old male patient with an intracardiac foreign body (bone cement) that generated a perforation on the right ventricle, and result in hemopericardium after percutaneous vertebroplasty. We performed open heart surgery to remove the foreign body.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.164-170
• /
• 2008

This research was verified detection way of intercept vehicles and performance evaluation after system installation using image detector as detection way of ground installation. By image recognition algorithm was on the trace of moving orbit of violation vehicles for detection way of intercept vehicles. When moving orbit is located special site, utilized geometric image calibration and DC-notch filter. These are cognitive system of license plate by making signal. Then, Bright Evidence Detection and Dark Evidence Detection were applied to after mixing. It is applied to way of Backward tracking for detection way of intercept vehicles. After the field evaluation of developed system, it should be analyzed the more high than recognition rate of minimum standards 80%. It should rise in the estimation of the site applicability is highly from now.

• Earthquakes and Structures
• /
• 제8권4호
• /
• pp.889-913
• /
• 2015

Structural vibration characteristics of a semi-active base-isolated building were investigated using seismic observation records including those of the 2011 Great East Japan earthquake (Tohoku earthquake). Three different types of analyses were conducted. First, we investigated the long-term changes in the natural frequencies and damping factors by using an ARX model and confirmed that the natural frequency of the superstructure decreased slightly after the main shock of the Tohoku earthquake. Second, we investigated short-term changes in the natural frequencies and damping factors during the main shock by using the N4SID method and observed different transition characteristics between the first and second modes. In the second mode, in which the superstructure response is most significant, the natural frequency changed depending on the response amplitude. In addition, at the beginning of the ground motion, the identified first natural frequency was high possibly as a result of sliding friction. Third, we compared the natural frequencies and damping factors between the conditions of a properly functional semi-active control system and a nonfunctional system, by using the records of the aftershocks of the Tohoku earthquake. However, we could not detect major differences because the response was probably influenced by sliding friction, which had a more significant effect on damping characteristics than did the semi-active dampers.

• 대한치과교정학회지
• /
• 제11권1호
• /
• pp.41-45
• /
• 1981

A girl aged 18 years and 1 month, had a Angle's Class III malocclusion, characterized by .anterior crossbite, anterior crowding, and constriction from right lower 2nd premolar to right lower 2nd molar. This patient underwent sealing and (equation omitted) extraction, and multibanded system was placed. After 14 months, anterior crossbite and crowding was corrected, an bothdental arches were improved. After 6 months from debanding, band space disappeared and any relapse was not detected.

• The Journal of Advanced Prosthodontics
• /
• 제11권4호
• /
• pp.215-222
• /
• 2019

PURPOSE. To evaluate the polishing effect on roughness and color change of pressed and layering ceramics after immersion in coffee solution. MATERIALS AND METHODS. 88 ceramic discs ($1.0mm{\times}10.0mm$) were manufactured - 44 nano-fluorapatite layering ceramics (IPS e.max Ceram. Group C) and 44 pressed lithium disilicate ceramic discs (IPS e. max Press - Group P). Each group was divided into 4 subgroups according to surface treatments: (G) Glaze, (S) Shofu polishing system (Shofu Inc.), (E) Edenta AG polishing System, (KG) $30-{\mu}m$ diamond granulation tip. Surface roughness (Ra) and color change (${\Delta}E$) measurings after the surface treatments were performed, before and 12 days after the immersion in coffee solution. A samples' qualitative analysis was conducted with a scanning electron microscopy (SEM). Data were statistically-treated with one-way-ANOVA and Duncan's tests, apart from paired t-test and Pearson's correlation test (${\alpha}=5%$). RESULTS. The decrescent order, both for surface roughness (Ra) and ${\Delta}E$ for both ceramics were: KG > E > S > G (P<.05). With exception for PG and CG subgroups, which did not present statistical difference between them, all other pressed ceramics subgroups presented smaller Ra values and greater ${\Delta}E$ values than the layering ceramics subgroups (P<.05). CONCLUSION. Although mechanical polishing systems presented intermediate Ra values, their colors were considered clinically acceptable. There is a strong correlation between the surface roughness and the color change of tested ceramics.