• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8901-8907
• /
• 2015

기존의 가로등은 배광특성 조절이 어려워 주변 환경 및 도로의 상황에 따라 빛을 고루 전달하지 못하므로, 눈부심, 농작물 결실저해 및 수면 방해 등의 광공해를 발생시키고 있는 실정이다. 본 논문에서는 이러한 문제를 해결하기 위해 주변 환경 및 도로 상황에 따라 조사되는 빛의 각도를 조절할 수 있는 새로운 구조의 LED 가로등 기구를 제안 하였다. 제안된 LED 가로등 기구는 반원구조의 형상을 갖는 각도 조절 장치를 이용하여 도로의 종류 및 특성에 따라 배광특성을 조절 할 수 있도록 하였다. 측정 및 모의실험결과 배광각도는 최소 $100^{\circ}$에서 최대 $154^{\circ}$까지 조절이 가능함을 확인하였고, 평균조도는 KS 규정의 15%를 초과하였으며, 종합 균제도는 KS 규정의 50% 이상을 초과하여 성능이 우수함을 확인할 수 있었다. 따라서 본 연구를 통하여 개발된 대용량 LED 가로등 기구는 광공해를 해소하고 광원 분포의 균제도 최적화와 눈부심을 최소화 할 수 있을 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2646-2651
• /
• 2021

A rectangular-shaped PET system with an adjustable gantry (AGPET) has been developed for imaging small animals. The AGPET system employs a new depth of interaction (DOI) method using a depth dependent reflector patterns and a new digital time pickoff method based on the pulse reconstruction method. To evaluate the performance of the AGPET, timing resolution, intrinsic spatial resolution and point source images were acquired. The timing resolution and intrinsic spatial resolution were measured using two detector modules and Na-22 gamma source. The PET images were acquired in two field of view (FOV) sizes, 30 mm and 90 mm, to demonstrate the characteristic of the AGPET. As a result of in the experiment results, the timing resolution was 0.9 ns using the pulse reconstruction method based on the bi-exponential model. The intrinsic spatial resolution was an average of 1.7 mm and the spatial resolution of PET images after DOI correction was 2.08 mm and 2.25 mm at the centers of 30 mm and 90 mm FOV, respectively. The results show that the proposed AGPET system provided higher sensitivity and resolution for small animal imaging.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.766_767
• /
• 2009

Generally, the Doubly Salient Machine such as Switched Reluctance Motor doesn't have Permanent Magnet, it sometimes adopts permanent magnet or DC filed winding for high efficiency or adjustable speed control. In this paper, adjustable speed range is compared for Doubly Salient Permanent Magnet Machine (DSPM), Brushless Doubly Fed Doubly Salient Machine (BDFDS) and Hybrid Excited Doubly Salient Machine (HEDS). Especially, air-gap flux density to the DC field current is shown and the operating speed as the field-weakening is estimated.

• 한국전자파학회논문지
• /
• 제18권5호
• /
• pp.478-485
• /
• 2007

본 논문에서는 분배 비율을 조절할 수 있는 1:N 비대칭 월킨슨 전력 분배기를 제안한다. 제안된 비대칭 전력분배기는 월킨슨 구조에 기인하고 있다. 제안한 분배기는 사각형 형태의 결함 접지 구조와 결함 접지 구조 안에 위치한 격리 패턴 구조, 그리고 바이어스 전압에 따라 캐패시턴스가 변하는 버랙터 다이오드를 지니고 있다. 결함 접지 구조를 지니는 마이크로스트립 전송 선로의 특성 임피던스는 버랙터 다이오드에 인가된 전압에 따라서 값이 변화하고, 이로 인하여 비대칭 전력 분배 비율도 변한다. 측정에서 얻은 비대칭 전력 분배 비율(N)은 $2.59{\sim}10.4$로써 매우 다양한 전력 분배 비율을 보여준다.

• 한국항행학회논문지
• /
• 제17권6호
• /
• pp.646-651
• /
• 2013

본 논문에서는 집중소자인 캐패시터 및 저항을 사용하여 특성조절이 가능한 소형 역-F 안테나를 제안하였다. 캐패시터는 안테나 크기 및 공진주파수의 조절을 위해 안테나 종단과 접지면 사이에 삽입된다. 반면에 $0{\Omega}$ 저항은 접지면과 단락되는 선로를 대체하여 구현한 것으로써, 단락점의 위치 이동은 안테나의 입력임피던스를 변화시킬 수 있다. 따라서 구조의 재설계 없이도 적절한 캐패시터 및 단락점 위치 선택으로 최적의 안테나 특성을 얻을 수 있다. 이와 같은 본 논문의 타당성 검증을 위하여 2.4 GHz 대역용 안테나를 설계 및 제작하여 지그비 무선 리모컨의 한 제품에 적용하였다. 적용된 안테나의 크기는 $8.5{\times}4.5mm^2$이며 재설계 없이도 대역폭 150 MHz 및 이득 2 dBi의 측정결과를 얻을 수 있다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.27-31
• /
• 2014

2G HTS tapes are widely used for various electric machines. In addition, stacked or parallel connected HTS tapes are essentially used to raise transport current level for large capacity electric machines. Therefore, critical current characteristic of stacked tapes need to be studied. Recently developed 2G HTS tapes are fabricated with various defects doping so that tapes possess pinning center to improve the critical current characteristic. During this process, the critical current is determined minimum value in not perpendicular magnetic field but a specific magnetic field angle according to the reported research. However, the effects of magnetic field angle to critical current of multi-stacked 2G HTS tapes have not been examined. In this paper, field coil which is a race-track coil wound by using an HTS tape with iron-core was fabricated to apply angle adjustable magnetic field to the 2G HTS tape samples. We measured critical current of single and multi-stacked two tapes that have different characteristic depending on various magnetic field angle and magnitude in liquid nitrogen environment. Furthermore, results of single and multi-stacked tapes were compared and analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.975-980
• /
• 2004

Positioning system is widely used for many practical applications. This system requires a good controller to achieve high accuracy and fast response with simple and self-adjustable design. In order to satisfy the above requirements, a new practical controller for positioning systems, namely nominal characteristic trajectory following (NCTF) controller with PI compensator, has been proposed. However, the effect of actuator saturation can not be completely compensated for integrator windup when the object parameters vary. This paper presents a method to improve the NCTF controller by overcoming the problem of integrator windup by adopting a fuzzy system. The improvement of the NCTF controller is evaluated through simulation using a rotary positioning system. The simulation result has demonstrated the effectiveness of the compensated NCTF in overcoming the problem of integrator windup.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1086-1090
• /
• 2001

In this paper, a method deciding the permissible gains of the P and PT controllers for a retarded process under stable condition is proposed. For analysis, the controlled process is assumed to be first-order system with time delay. At first, the adjustable parameter sets causing stability limit are obtained based on the frequency domain condition which makes the roots of the characteristic equation locate on the imaginary axis. And the cut-in frequency ${\omega}_p$ to bring the parameter set to P control from PI control is derived is derived in terms of L and $T_m$ then ${\omega}_p$ is used to compute the maximum gain with stable condition. The results indicate that the permissible controller gains can be described by a unique if parameters L and $T_m$ are know.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1140-1153
• /
• 2018

The harmonic impedance characteristic of a traction power supply system (TPSS) is necessary for taking actions to suppress the high-order harmonic resonances caused by AC electric locomotives. This paper proposes a controllable harmonic generating method (CHGM) for measuring the TPSS harmonic impedance by injecting harmonic disturbances of different frequencies and amplitudes into the TPSS. This method applies phase shifted pulse-width modulation (PSPWM) and ensures that the undesired sideband harmonics can be negligible while the desired harmonic is both controllable and adjustable. Multiple harmonics can be emitted at the same time. The implementation of the method is also presented. Simulations are carried out to validate the performance of the proposed method. Finally, experimental results on a 5 H-bridge converters platform verified the effectiveness and feasibility of the proposed method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.651-654
• /
• 2004

SRM (switched reluctance motor) provides an excellent adjustable speed and torque characteristics. SRM has the possibility of maintaining full power over a wide speed range. So, many attempts are being done from home appliances to industrial applications. Especially, a traction drive of an SRM is one of a good application for it's DC-series characteristic. However, because of the switching mechanism and reluctance torque, it has some disadvantage of noise and vibration. It is difficult to adopt to an appliance demanding silency. Performance and noise tests with 6/4 and 12/8 SRM were excuted to compare the characteristics.