• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.180-186
• /
• 2005

As a driving method of AC-PDP, Address-Display Separated(ADS) driving has been widely adopted for its simple architecture and low discharge failure rate. However, a high definition like a HDTV has defect of long addressing time by reason of a number of pixels. Priming effect isn't fully sustained because of long addressing time during the address period. Therefore, it has different wall charge and luminance of each addressing time in the sustain period. In this study, we suggest a new driving waveform on the address period to improve these defects. We applied a ramp waveform, instead of a square waveform, to an address period in ADS, for operating on the AC-PDP, which used the conventional gas [He-Ne-Xe]. When the ramp waveform is applied to the address period, we experimented for uniform wall charge and the improved luminance by sustained Priming effect at each addressing time in the sustain period.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.1-5
• /
• 2002

The sustain driver for AC plasma display panel should provide alternating high voltage pulses to ignite plasma and recover the energy discharged from the intrinsic capacitance between the scanning and sustaining electrodes inside the panel. In this paper, an efficient sustain circuit employing boost-up function is proposed to achieve a faster rise-time in order to be suitable to widely used the address display period separated (ADS) driving method. The proposed circuit improves the recovery efficiency, regardless of the variation of the panel capacitance. The principle of operation, features, and simulated results are illustrated and verified on a 7.5-inch diagonal panel at 200 [kHz] operating frequency based on experimental prototype.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1120-1124
• /
• 2004

Recently, Plasma Display Panel(PDP) has been in the spotlight as one of the next generation flat-panel-display device. However, it has several drawbacks like the low contrast ratio and the low luminance. In this study, a new address waveform is suggested to improve the priming effect and contrast ratio at the address period in the Address Display period Separated(ADS) method. We modified waveform, instead of a conventional waveform, to an address period, for operating on the Plasma Display Panels, which used the conventional gas [He-Ne-Xe〕. When the ramp pulse is added to the address period at the sustain electrode, it is improved on the priming effect and contrast ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.647-650
• /
• 2005

A new driving scheme, Address and Display Period Complex Driving for Expanding Gray Scale(ACE), is proposed by mixing Address Display period Separated(ADS) and Address While Display(AWD). In this method scan lines are divided in blocks driving by AWD and scan lines in block progress sequential high speed addressing. ADS driving get accomplished in low gray level for expanding gray scale. Scan time is reduced and the number of subfields is increased by high speed addressing of ACE. That expands the gray scale and decreases the dynamic false contour. Also, that improves contrast by using ramp reset.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2215_2216
• /
• 2009

As a driving method of AC PDP, address display separated (ADS) scheme has been widely used. In ADS method, a picture of one frame is divided into eight subfields. In this paper, the effect of sustain voltage stress have been studied with several parameters. The experimental results show that sustain pulses in the previous subfield work as the stress to address discharge in the current subfield. It is also shown that as the voltage of the sustain period in the previous subfield increases, the address time lag in the current subfield decrease slightly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.121-122
• /
• 2000

The understanding of reset scheme is essential for the driving of AC PDP (Plasma Display Panel). The characteristics of reset period of AC PDP was examined with the variation of pulse time and voltage in the ADS (Address Display Separated) driving method presented by Fujitsu,. The addressing characteristics showed drastic change as a function of the erasing time and addressing pulse width. In this paper, these results were explained by the change of wall charge variation, and it was estimated with the currents through each electrode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.50-56
• /
• 2002

When the plasma panel is used as a display, frequent discharging are made to occur by alternatively charging each side of the panel to a critical voltage, which causes repeated gas discharges to occur. In this paper, an efficient sustain driver is proposed to achieve a faster rise-time in order to be suitable to widely used ADS driving method. The proposed circuit increases an operational margin up to 20 % compared with conventional approaches improving the recovery efficiency regardless of the variation of panel capacitance. Thanks to the increased operational margin, the brightness decrease problem can be solved without a limitation to sustain pulse width. The principle of operation, and features are illustrated, and verified on a 7.5 inch diagonal panel at 200 kHz operating frequency - based on experimental prototype.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.170-173
• /
• 2003

The driving method is one of the most important factors of PDP, so various driving methods have been developed to improve the duality of PDP Nowadays, most of PDPs apply to ADS (Address and Display period Separated) driving method. In this paper, a new driving method that divides scan lines into multi-Blocks is suggested. The proposed driving method in this paper can drive 14 sub-fields per 1 TV field in SD panel, 16 sub-fields per 1 TV field in HD panel. And sufficient Address margin can be obtained.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.1-5
• /
• 2000

최근 디지털 텔레비젼전 및 고해상도(High Definition) 텔레비전용 표시장치로 교류형 풀랴즈마 디스플레이가 각광 받고 있다. 상용화되고 있는 교류형 플라즈마 디스플레이의 구조를 보면 3전극행 면방전형(three electrodes surface discharge type)이 주류이다. 재의 효율은 11m/W의 수준으로 본격적인 상용화를 위해서는 효율의 향상이 관건이다. 효율 향상올 위해서는 패널 구조(Panel structure)의 개선도 필요하지만 주어진 구조에서 최대한의 효율을 갖도록하는 구동방법의 최적화가 선결 과제이다. 교류형 플라즈마 디스플레이의 방전 이미지는 연속되는 방전 발광에 의해 이루어 진다. 대부분의 전략 소모는 연속되논 발광을 위한 유지 방전에서 소모되기 때운에 유지방전의 파형의 최적화는 고 방전 효율을 위한 중요한 과제이다. 구동 방식으로서는 ADS(Address and Display period Separated) 구동이라는 방식이 일반적으로 널리 쓰이고 있다. 이 구동법의 평균 유지방전 주파수는 수십 [kHz]이지만 실제 주파수는 100[kHz]에서 200[kHz] 사이의 상당히 높은 값이다. 본 연구 결과에 따르면 형광체가 가시광을 방출시킬 때 형광체 재료의 특성상 감쇄시간(Decay Time)이 수 ms에 이른다. 만약 감쇄 시간이 유지방전 펄스으 주기보다 길다면 방전에서 만들어진 진공자외선(Vacuum Ultra Violet Rav)이 가시광으로 변환애 효과적으로 이용되지 못한다. 결국 발광 효율은 유지방전 주파수에 비례하여 감소한다. 결론적으로 말해 저 주파수 유지 방전으로 발광효율을 크게 개선할 수 있다.