• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권11호
• /
• pp.541-545
• /
• 2002

This paper proposes the new narrow erase method to erase wall charges formed in an AC plasma display panel (PDP) cell. In the proposed method, pulse timing of switch at the sustain period is adjusted for inducing, a weak discharge. Then, after the narrow erase, the voltage of the X electrode is set to differ from that of the Y electrode. For the proposed method, the measured maximum address voltage margin was 38.3V at Y_Rest voltage of 100V and sustain voltage of 180${\sim}$185V. However, for the conventional method, in which the X and Y electrodes are set to be of equal voltage after the narrow erase, the measured maximum address voltage margin was 31.3V at Y_Rest voltage of 150V and sustain voltage of 180V. This result shows that the measured maximum voltage margin for the proposed method is about 7V(22%) higher than that for the conventional method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.112-116
• /
• 2000

In this paper, we investigated the relationship between the position of bus electrode and address time, luminance and luminous efficiency in ac PDP of 50in. XGA resolution. When the bus electrode was placed in which was about $140{\mu}m$ apart from discharge gap, the luminous efficiency was the highest and address time was the least. Whereas, when the bus electrode was placed in the edge of ITO, the luminance was the highest.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.639-642
• /
• 2005

A new dual-slope ramp (DSR) reset waveform is proposed to improve the dark room contrast ratio in AC-PDPs. The proposed reset waveform has two different voltage slopes during a ramp-up period. The first voltage slope is lower than the conventional ramp voltage slope, causing a reduction in the background luminance, whereas the second voltage slope is higher than the conventional ramp voltage slope, causing an increase in the background luminance. Thus, a bias voltage is also applied during the second voltage-slope period to adjust the background luminance and address discharge characteristics. As a result, the proposed dual-slope reset waveform can lower the background luminance, thereby improving the high dark room contrast ratio of an AC-PDP without reducing the address voltage margin

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1391-1392
• /
• 2007

A selective reset waveform which can improve the dark room contrast ratio in a large sustain gap structure is suggested in this paper. When conventional selective reset discharge is performed, frequent unexpected misfiring happens because of high Vxb and much quantity of negative wall charge formed on Y electrode during final sustain period. The misfiring between sustain electrode and address electrode can be removed by lowering Vxb value and the misfiring between address electrode and scan electrode can be prevented by applying last sustain pulse of 40us and rectangular pulse of Vscan on Y electrode. When the selective reset waveform has one time reset per 8 subfields, black luminance of 1.55 cd/m2 can be obtained without any misfiring.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.255-260
• /
• 2014

교류형 플라즈마 디스플레이(AC PDP)의 유지기간 동안 강방전과 약방전을 발생시킬 수 있는 파형을 인가하여 계조의 선형성을 향상시키기 위한 새로운 유지 구동파형과 그의 구현 방법이 제안된다. AC PDP의 계조를 표현하기 위한 구동방법은 하나의 TV 프레임 내에 여러 개의 서브필드를 조합하는 것이며 각 서브필드 내의 휘도는 유지 펄스 개수의 차이에 의해 결정된다. 유지기간 동안 유지 펄스들이 인가되면 똑같은 크기의 강한 플라즈마 방전만 발생하므로 이상적으로 선형적 계조 표현이 용이해 보이지만, 각 서브필드 내에는 계조 표현과 상관없는 기입 방전과 첫 번째 유지 방전이 매번 발생하기 때문에 사실상 선형적 계조 표현이 어려워진다. 그러므로 유지기간 동안 유지 파형의 모양을 변형시켜서 강방전 대신 일부분 약방전도 발생시키는 새로운 유지 구동 파형을 적용하여 계조 표현을 선형에 가깝도록 개선하였다.

• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.7-11
• /
• 2007

The objective of this study is to evaluate the characteristics of a newly proposed high-speed drive method for the gray scale display for high-resolution plasma display panels(PDP). In the experiment it was found that the characteristics of gray scale display are not closely affected by a priming period below 50[${\mu}s$], the width of the priming period, and that it can be driven stably from the brightest sub-field to the darkest sub-field even though a priming discharge is applied to the 1 TV-field only once. Moreover, from the experimental result, the gray scale pattern of 8-bit and 9 sub-fields was stably displayed in the experimental PDP with scan pulses having the pulse width of 0.7[${\mu}s$]. An address voltage margin of about 25[V] and a sustain voltage margin of about 10[V] was obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.355-358
• /
• 2008

We report a method for improving characteristics of AC PDP in this study. This improvement is obtained by spreading MgO nanoparticles on transparent dielectric layer. These nanoparticles are covered with MgO protective layer by electron beam evaporation. MgO nanoparticle has difference in cathodoluminescence stronger than MgO layer by electron beam evaporation. This method worked for reducing statistical delay especially. Efficacy, discharge voltage and luminance were also improved But these improvements has limited lifetime because continuous ion bombardments changed characteristic of MgO surface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1582-1584
• /
• 2001

In ac plasma display(PDP), an image quality mainly depends on the contrast ratio. And the contrast ratio is affected by the driving condition and size of discharge cell. In this study, the electrical and optical characteristics during reset, address and sustain discharge were investigated as the height and width of barrier rib were varied in order to obtain the highest contrast ratio. As a result, the optimum rib height and width were 140${\mu}m$ and 600${\mu}m$, respectively.

• 한국유기농업학회지
• /
• 제9권3호
• /
• pp.23-44
• /
• 2001

To address complex solutions to tack1e the cost rise with the increasing of the prices of crude oil, and to lower warming gas discharge in agricultural sector in line with the framework Convention on Climate Change, we need to net only develop the methods of simply reducing energy use ratio, but also effectively energize resources discharged in the course of agricultural production aimed at enabling repealed farming, and develop systems to reinvest such energy into agricultural production and apply them to actual farming. To that end, specifically, we need to reduce the energy cost in agricultural production, and produce and harness bio gas that makes it possible to stabilize the continued supply of energy. Thus, in this research, we seek to discuss energy use volume and warming gas discharge, and the characteristics of bio gas and its use methods alike, in agricultural sector, and thus present methods for environment-friendly and continual development in agriculture.

• Journal of Information Display
• /
• 제3권2호
• /
• pp.13-18
• /
• 2002

Numerical simulation is one of the most useful tools to study gas discharge phenomena that occur in alternating current plasma display panel (AC-PDP) cell. Most PDP cell simulations have been performed for two-dimensional cell, is cross-section along the address electrode. We developed a three-dimensional PDP simulator and applied it to a T-shaped electrode cell in order to show the effects of sustain electrode shape that cannot be included in two-dimensional simulation. The dependence of power consumption on electrode shape and area in the simulation showed the same trend as experiment.