• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1201-1204
• /
• 1996

The previous results on LTR methods for time delay systems need the solution of the operator-type Riccati equation. In addition, it can be difficult to make the target loop shape representing the design specification. This paper proposes a new LTR method for input-delayed systems using well-established LTR method for non-delay systems. For doing this, a time delay margin is derived and the time delay of the input-delayed systems is assumed less than equal to the time delay margin. A simple example is presented for illustrations.

• IE interfaces
• /
• v.6 no.2
• /
• pp.91-101
• /
• 1993

Developed in this paper is a standard time data for shirt sewing operations in the apparel-making industry. Since this data is made of formula developed for each unit operation and includes the formula for the machine time calculation, users could use it for obtaining the normal or standard time without any special efforts. In addition, this data handles the variations due to the design changes of a shirt through the parameters in the formula. compared with the MTM-1. The standard time data developed is shown to be easier and faster in determining the standard time with acceptable accuracy.

• Food Science of Animal Resources
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2000

This study was carried out to investigate the fermentation characteristics and storage of set-type yoghurt added mugwort extracts(AME) such as pH, growth of lactic acid bacteria, number of viable cells, viscosity, and sensory characteristics during 24 hours fermentation and 15 days storage. Addition of mugwort extracts was grown rapidly of lactic acid bacteria rather than that of control and also 4 or 8% AME groups were grown similar to control. The drop of AME pH of broth was less compared with control during incubation of lactic acid bacteria. The growth of lactic acid bacteria during incubation of AME yoghurt was not different of viable cell count between AME group and control in beginning time, but the viable cell count of AME groups were increased depended opon addition quantity of AME in ending time. Addition of mugwort extracts was not affect on pH change during yoghurt fermentation and increased a lactic acid bacteria number as well as no effect of yoghurt fermentation in ending time. The viscosity of yoghurt was almost not changed 3 hours after yoghurt mix and increased rapidly 6 hours after yoghurt mix. Although control and 0.5% AME group showed maximum viscosity at 18 hours of fermentation, 1 and 2% AME group showed linear increase until 24 hours of fermentation. Mugwort did not affect pH and viable cel number of lactic acid bacteria during 15 days storage 24 hours after fermentation. Sensory evaluation of the AME yoghurt showed that flavour, texture and acid taste were not affected by addition of mugwort. However, the appearance and taste were dropped by addition of mugwort.

• Journal of Korea Multimedia Society
• /
• v.20 no.5
• /
• pp.808-826
• /
• 2017

Most of conventional DSS's(Digital Signage Systems) have been built based on LAMP framework. Recent researches have shown that MEAN or MERN stack framework is simpler, more flexible, faster and more suitable for web-based application than LAMP stack framework. In this paper, we propose a design and implementation of MEARN (ME(A+R)N) stack-based real-time digital signage system, MR-DSS, which supports handing real-time tasks like urgent/instant messaging, system status monitoring and so on, efficiently in addition to conventional digital signage CMS service tasks. MR-DSCMS, CMS of MR-DSS, is designed to provide most of its normal services by REST APIs and real-time services like urgent/instant messaging by Socket.IO base under MEARN stack environment. In addition to architecture description of components composing MR-DSS, design and implementation issues are clarified in more detail. Through experimental testing, it is shown that 1) MR-DSS works functionally well, 2) the networking load performance of MR-DSCMS's REST APIs is better compared to a well-known open source Xibo CMS, and 3) real-time messaging via Socket.IO works much faster than REST APIs.

• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.11-16
• /
• 1985

The semiconducting ceramics having positive temperature coefficient of resistivity in he family of 0.25mol% $Sb_2O_3$ doped barium titanates were prepared with AST ($4Al_2O_3$.$9SiO_2$.$3TiO_2$) and $MnO_2$ as additives and these electrical properties were investigated. The PTCR characteristic in these ceramic materials was improved by the addition of AST and $MnO_2$ because the addition of AST decreased the room temperature resistivity and controlled grin size due to the formation of a liquid phase during sintering and the addition of $MnO_2$ improved by forming acceptor level on the intergranular layer. On dependence on the switching time as switching temperature was increased the initial power and switching time increased.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.269-271
• /
• 2006

In power system, the reactive power is closely associated with voltage. In addition Reactive power has localized characteristic. Recently wide area blackout caused by reactive power imbalance. Therefore it is important to control reactive power considering its characteristic. Until now maintenance of system voltage has been controlled by shunt compensation rather than generators. However because of a large time-constant, shunt compensators are difficult to manage disturbances immediately. In addition shunt compensation has discrete characteristic, which make disturbances in system. In this paper we studied the voltage maintenance method of local buses by controlling the reactive power output of a generator which is closely related a load bus in addition the proposed method was verified by test system.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.3
• /
• pp.89-98
• /
• 2002

The changes of conventional clarification process and an increase in treatment cost are required to meet increasingly stringent regulations related to the treated water quality. Although many enhanced coagulations have introduced to improve organic matter removal, the results to remove color, nitrogen and phosphorus as well as organic material have not been very efficient yet. The removal of waste matters such as SS, organic matter, color and turbidity contained in dyeing wastewater was carried out by using the combination of calcium hydroxide and magnesium sulfate. The flocculation was investigated as a function of coagulant dose, pH, mixing time, settling time and coagulant addition modes such as the sequential addition of the two coagulants and the simultaneous addition of them. The flocculation by the combination of calcium hydroxide and magnesium sulfate was compared with that by aluminum sulfate. The mechanism of flocculation was investigated as well. About 84% of color in dyeing watewater was removed by flocculation with combination of calcium hydroxide and magnesium sulfate.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.4
• /
• pp.10-18
• /
• 2002

The changes of conventional clarification processe and an increase in treatment cost are required to meet increasingly stringent regulations related to the treated water quality. Although many enhanced coagulations have introduced to improve organic matter removal, the results to remove color, nitrogen and phosphorus as well as organic material have not been very efficient yet. In this context as new flocculation using calcium hydroxide and magnesum sulfate was carried out. The removal of waste matters such as SS, organic matter, COD, nitrogen and phosphorus contained in stock wastewater was carried out by using the combination of calcium hydroxide and magnesium sulfate. The flocculation was investigated as a function of coagulant dose, pH, mixing time, settling time and coagulant addition modes such as the sequential addition of the two coagulants and the simultaneous addition of them. The flocculation by the combination of calcium hydroxide and magnesium sulfate was compared with that by aluminum sulfate. The mechanism of flocculation was investigated as well. About 60% of COD in stock watewater was removed by flocculation with combination of calcium hydroxide and magnesium sulfate.

• Korean journal of food and cookery science
• /
• v.19 no.1
• /
• pp.46-59
• /
• 2003

Backsulgi were prepared with the addition of nutriprotein powder at 0%, 2%, 4%, 6%, 8%, and their sensory quality and mechanical characteristics were compared. In addition, the changes in the sensory and textural characteristics of Backsulgi were determined while storing them at the temperatures of 4$^{\circ}C$ and 20$^{\circ}C$ for 0, 1, 2, and 3 days. In the sensory evaluation, Backsulgi with 4% nutriprotein powder showed the highest score in overall quality. In the measurement of color changes, L value (lightness) was decreased, but a value (redness) and b value (yellowness) increased as the addition of nutriprotein powder increased. In textural characteristics, the hardness, gumminess and cohesiveness of Backsulgi were decreased by the increase of nutriprotein powder. The hardness and gumminess were increased as the storage time increased.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.52.1-52.1
• /
• 2011

In this work, the effect of the addition of bioactive glass in the biocompatibility and mechanical behavior of conventional TTCP/DCPA based bone cement were investigated. The cement was initially modified with chitosan and HPMC which cross-linked with citric acid to improved mechanical properties.The injectable bone substitutes were further modified by adding varying amounts of bioactive glass (0%, 10%, 20% and 30%) and its effects on the biocompatibility of the material were studied. Afterbio-glass powders were mixed with the optimized composition for HPMC and citric acid content,the IBS was incubated at $37^{\circ}C$ at different time intervals and showed progressive formation of HAp with increasing time. Mechanical properties like Vickers hardness and compressive strength were found to increase with the increasing amount of bioactive glass addition and that setting time was shortened. The fabricated IBS morphologies were further characterized using SEM. MTT assay was performed to check the cell cytotoxicity and cell proliferation for 1, 3 and 5 days. Cell morphology, adhesion and proliferation behavior of cell in the IBS by culturing MG-63 cells on the IBS for 20, 60 and 90 mins and 1, 3 and 5 days was also investigated. All the results showed increasing biocompatibility as the bioglass content increased. MTT results found the materials to be cytocompatible and SEM images showed that cells attached and proliferated successfully.