• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.928-934
• /
• 2009

The purpose of this study was to examine the possibility of making functional sulgitteok with Goami 2 rice, which is a rich that is high in dietary fiber. Sulgitteok was made by adding various amounts of Goami powder(25, 50, 75, and 100 %) to rice powder. Then, the sensory tests and other tests to measure color, texture and hardness were examined as a function of time and the moisture content in sulgitteok was measured to determine the quality and characteristics of different types of sulgitteok. The conclusions of these tests were as follows : In the sensory evaluation preference test of sulgitteok made with various amounts of Goami powder, the overall preference was the highest in sulgitteok made with 50% Goami powder (S2). In the difference test, the higher the amount of added Goami powder, the lower the grades were. The S4 group, which was made with Gomai powder, had a strongly unique odor compared with those made with rice powder, which smelled weaker. In terms of the color values of Gomai added sulgitteok, the higher the amount of added Gomai powder, the lower the lightness value of sulgitteok, where group S4 had the lowest value. In addition, the S4 group, which was made with Goami powder, had the hightest red and yellow color. The texture test indicated that sulgitteok containing a large amount of Goami powder were considerably harder compared with the control group. While every group containing Goami powder (S1, S2, S3 and S4) became harder during the first to the third day of the test, their hardness tended to drop after longer storage times. In the control group, the hardness continued to grow from the start up to the fifth day. After five days' there was a noticeable change in the moisture content in the different types of sulgitteok, with more water evaporating in the S3, S2, and S1 groups than in the S4 groups, which contained the highest amount of Goami powder. Group C, which contained no Goami powder, had the largest water evaporation. Sulgitteok that contained more Goami powder turned out to be more savory than baekseolgi made solely of rice powder. However, they were less preferable overall, since they were rated lower in terms of color, texture and other characteristics. Therefore, utilize Goami tteok as a functional ingredient in food for people with diabetes or obesity, further studies on additives that can provide a sticky texture and favorable color should be conducted. In addition, different types of ttoek such as pounded or boiled ones may be preferable to sulgitteok.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.2
• /
• pp.55-63
• /
• 2018

In order to support the load of the train with enough stiffness, a study on an effective method for the characterization of the stiffness of the compacted subgrade is required. In this study, the crosshole-type dynamic cone penetrometer (CDCP) is used for the stiffness characterization of the subgrade along the depth. For the application of the CDCP test, three points of compacted subgrades are selected as the study sites. For the study sites, CDCP test, in-situ density test, and light falling weight deflectometer (LFWD) test are conducted. As the results of CDCP tests, shear wave velocity profiles are obtained by using the travel times and the travel distances of the shear waves along the depth. In addition, maximum shear modulus ($G_{max}$) profiles are estimated by using the density of the subgrades and the shear wave velocity profiles. The averaged maximum shear moduli at each testing point are highly correlated with the dynamic deflection moduli ($E_{vd}$) determined by LFWD tests. Therefore, a reliable stiffness characterization of the subgrade can be conducted by using CDCP tests. In addition, because CDCP characterizes the stiffness of the subgrade along the depth rather than a representative value, CDCP test may be effectively used for the stiffness characterization of the subgrade.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1547-1554
• /
• 2017

VESTA (Verification of Ex-vessel corium STAbilization) and VESTA-S (-small) test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging $ZrO_2$ melt jet on a sacrificial material were performed to investigate the ablation characteristics. $ZrO_2$ melt in an amount of 65-70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40), and the other is a stainless steel (SUS304) melt. Metallic melt in an amount of 1.5-2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. $ZrO_2$ melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is $UO_2$ 60%, Zr 10%, $ZrO_2$ 15%, SUS304 14%, and $B_4C$ 1%, was melted in a cold crucible using an induction heating technique.

• Analytical Science and Technology
• /
• v.31 no.5
• /
• pp.201-207
• /
• 2018

Blood is a commonly found body fluid at crime scenes, and plays an important role in identifying suspects and in the reconstruction of crime scenes. Although serological detection of blood has been widely used in the field of forensic science, research on the detection of old bloodstains is scarce. This work aimed to compare various methods for the detection of old bloodstains and validate the reliability of their results. Four presumptive tests-Tetramethylbenzidine, $Bluestar^{(R)}$, Leucomalachite Green, Kastle-Meyer tests-and two confirmatory tests-Fecal Occult Blood (FOB) and Rapid Stain $Identification^{(TM)}-Blood$ ($RSID^{TM}-Blood$) tests-were compared. Bloodstain samples from post-mortem cases were collected on gauzes and then stored at room temperature for periods from 7 to 30 years. All the presumptive tests were positive, even for the 30-year-old sample. However, FOB and $RSID^{TM}-Blood$ provided false negative results for some samples stored for 17 years or more (1988 to 2001). The results indicate that FOB and $RSID^{TM}-Blood$ are not reliable for the detection of old bloodstains. These findings can be useful in the selection of an appropriate detection method for serological testing of old bloodstains. In addition, the information will be useful background knowledge when applied in the field of forensic practice.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.129-140
• /
• 2007

A major purpose of this study is to develop a drainage system that can quickly drain water penetrated into pavement layers to mitigate pot holes which is one of the major distress types in bridge deck pavements. This system can be established by applying a thin drainage layer between waterproof and pavement layers. The most important elements for this system are the performance of waterproof layer and construction technique for the thin drainage layer. The porous asphalt mix with the maximum aggregate size of 10mm is first developed based on the porous asphalt mix design guide proposed by NCAT, and various physical and mechanical tests are performed to confirm that the porous mix satisfies all the specification requirements. In addition, a series of laboratory tests including low-temperature bending and bonding strength tests for the MMA(Methyl Methacrylate) type of waterproofing material. It is observed from the tests that the MMA material satisfies all the specification requirements. To evaluate the Reld performance of the drainage system, a field study has been conducted on a relatively small size bridge. The QC/QA tests are conducted on the both waterproofing and pavement materials. It has been found that the drainage system works well to drain the water penetrated into the pavement layers.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.27-40
• /
• 2003

In the present study, a newly modified soil nailing technology named as the PSN(Pretension Soil Nailing) system is proposed. Effects of various factors related to the design of the pretension soil nailing system, such as the length of a sheathing pipe and the fixed cone, are examined throughout a series of the displacement-controlled field pull-out tests. 9 displacement-controlled field pull-out tests are performed in the present study and the pretension forces are also evaluated based on the measurements. In addition, both short-term and long-term characteristics of pull-out deformations of the newly proposed PSN system are analyzed and compared with those of the general soil nailing system by carrying out the stress-controlled field pull-out tests. A numerical approach is further made to determine a postulated failure surface as well as a minimum safety factors of the proposed PSN system using the shear strength reduction technique and the $FLAC^{2D}$ program. Global minimum safety factors and local safety factors at various excavation stages computed in case of the PSN system are analyzed throughout comparisons with the results expected in case of the general soil nailing system. An efficiency of the PSN system is also dealt with by analyzing the wall-facing deformations and the adjacent ground surface settlements.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.12
• /
• pp.51-61
• /
• 2014

This paper presents an experimental study of the plugging effect on the capacity of open-ended piles installed in sandy soil. Full-scale tests, including dynamic and static axial-compression load tests, were carried out on three instrumented piles with different diameters (508.0, 711.2 and 914.4 mm). To measure the outer and inner shaft resistances acting on the piles, a double-walled system was utilized with instrumented strain gauges on the outside and inside walls of the pile. The results of field tests show that the inner shaft resistance was mostly mobilized at the location between the pile tip and 18-34% of the total plug length. It was found that the soil plugging in the lower portion has influence on the inner shaft resistance. In addition, it can be also demonstrated that the ratio of inner shaft resistance plus annulus load resistance to total resistance decreased with increasing pile diameters. The results of these tests show that the relationship between the degree of plugging and pile diameter is clearly established. Direct observations of the soil plugs were made and used to quantify both the plug length ratio (PLR) and the incremental filling ratio (IFR). Based on this result, it was found that the N value of the standard penetration test (SPT) is highly correlated with the IFR.

• Biomedical Science Letters
• /
• v.25 no.4
• /
• pp.381-389
• /
• 2019

The physiological function test is the only patient contact area in the field of clinical laboratory. We need to recruit and encourage the experts due to requiring the expertise and long time for examination. However, there is currently no rule for estimating optimal workforce in the field of physiological function tests. The purpose of this study is to establish the basis of the studies for mid- to long-long term job creation in the field of ultrasound by evaluating the number of appropriate tests and appropriate workforce. We calculated the quantitative and qualitative workload for the number of appropriate tests and appropriate workforce using online questionnaire. All statistical analyses were performed using SPSS version 18.0 (SPSS Inc., Chicago, IL, USA). A total of 216 respondents were 48 (22.2%) male and 168 (77.8%) female. A total of 157 laboratories were 62 (39.5%) for echocardiography, 91 (58.0%) for the transcranial Doppler (TCD) and 4 (5.7%) for the carotid ultrasound. The mean number of appropriate tests was 10 ± 2 in the echocardiography, 9 ± 2 in TCD and 11 ± 2 in the carotid ultrasound. In addition, the number of laboratories required to recruit employees for appropriate workforce was 19 in echocardiography, 18 in TCD, and 0 in carotid ultrasound. The number of hospital required to recruit workforce were 7 primary hospitals, 22 secondary hospitals, 7 third hospitals. This study can be used as an important data as the first study at present time when the data on the workforce status and work environment of the ultrasonic laboratories is insufficient. Based on the quantitative and qualitative workloads, the number of appropriate tests and appropriate workforce can support mid- to long-long term job creation in the field of ultrasound.

• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.285-294
• /
• 2019

Objectives: For suitable risk management of the domestic aquatic environment, it is necessary to conduct toxicity tests using species native to Korea. In the present study, we performed toxicity ring tests using endemic freshwater arthropoda Neocaridina denticulata and evaluated its validity and reproducibility as an international standard test species. Methods: To evaluate the sensitivity levels of N. denticulata to hazardous chemicals, toxicity values for several chemicals were compared with other standard test species. Intra- and inter-laboratory acute toxicity tests were performed both within a single laboratory and among four laboratories respectively using 3,4-Dichloroaniline, which is generally used as a reference test substance in fish toxicity tests. In addition, intra- and inter-laboratory coefficient of variations (CVs) were calculated to evaluate reproducibility based on the estimated toxicity values. Results: The sensitivity of N. denticulata to several chemicals was found to be similar with D. manga, indicating that the species is valid as a test species. The CVs of the intra- and inter-laboratory tests were 22.946% with four qualified runs and 8.828% among the four laboratories, respectively. Conclusions: N. denticulata serves in an important role in the food chain of Korean aquatic ecosystems and also inhabits several other Asian countries. Since the validity and reproducibility of the species were confirmed as a toxicity test species in this study, further efforts are needed to establish N. denticulata as the international standard test species for the appropriate risk assessment of aquatic ecosystems at home and abroad.

• Journal of Korea Foundry Society
• /
• v.35 no.5
• /
• pp.120-127
• /
• 2015

The effects of Ti, B and Zr on grain refinement and castability were investigated in Al-4wt%Mg-0.9wt%Si-0.3wt%Mn-0.15wt%Fe alloy. Measurement of cooling curve and micro-structure observation were performed to analyze the effects of the addition of minor elements Ti, B and Zr during solidification. The prominence of effect on grain refinement was in increasing order for Ti, Zr and B element. Fine grain size and an increase of the crystallization temperature for ${\alpha}$-Al solution were evident as the amount of addition elements increased in this study. Addition of 0.15wt% Ti was most effective for grain refinement, and the resulting grain size of ${\alpha}$-Al solution for shell mold and steel mold were $72.3{\mu}m$ and $23.5{\mu}m$, respectively. Fluidity and shrinkage tests were perform to evaluate the castability of the alloy. Maximum fluidity length and minimum ratio of micro shrinkage were recorded for 0.15wt% Ti addition due to the effect of the finest grain size.