• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2031-2042
• /
• 2017

In this paper, a novel traffic flow control method based-on ramp metering and speed regulation using an adaptive sliding mode control (ASMC) method along with a deadzoned parameter adaptation law is proposed at a stochastic macroscopic level traffic environment, where the influence of the density and speed disturbances is accounted for in the traffic dynamic equations. The goal of this paper is to design a local traffic flow controller using both ramp metering and speed regulation based on ASMC, in order to achieve the desired density and speed for the maintenance of the maximum mainline throughput against disturbances in practice. The proposed method is advantageous in that it can improve the traffic flow performance compared to the traditional methods using only ramp metering, even in the presence of ramp storage limitation and disturbances. Moreover, a prior knowledge of disturbance magnitude is not required in the process of designing the controller unlike the conventional sliding mode controller. A stability analysis is presented to show that the traffic system under the proposed traffic flow control method is guaranteed to be uniformly bounded and its ultimate bound can be adjusted to be sufficiently small in terms of deadzone. The validity of the proposed method is demonstrated under different traffic situations (i.e., different initial traffic status), in the sense that the proposed control method is capable of stabilizing traffic flow better than the previously well-known Asservissement Lineaire d'Entree Autoroutiere (ALINEA) strategy and also feedback linearization control (FLC) method.

• Structural Engineering and Mechanics
• /
• v.20 no.5
• /
• pp.543-558
• /
• 2005

The natural frequencies of a long span bridge vary during its construction and it is thus difficult to apply traditional tuned liquid column dampers (TLCD) with a fixed configuration to reduce bridge vibration. The restriction of TLCD imposed by frequency tuning requirement also make it difficult to be applied to structure with either very low or high natural frequency. A semi-active tuned liquid column damper (SATLCD), whose natural frequency can be altered by active control of liquid column pressure, is studied in this paper. The principle of SATLCD with adaptive tuning capacity is first introduced. The analytical models are then developed for lateral vibration of a structure with SATLCD and torsional vibration of a structure with SATLCD, respectively, under either harmonic or white noise excitation. The non-linear damping property of SATLCD is linearized by an equivalent linearization technique. Extensive parametric studies are finally carried out in the frequency domain to find the beneficial parameters by which the maximum vibration reduction can be achieved. The key parameters investigated include the distance from the centre line of SATLCD to the rotational axis of a structure, the ratio of horizontal length to the total length of liquid column, head loss coefficient, and frequency offset ratio. The investigations demonstrate that SATLCD can provide a greater flexibility for its application in practice and achieve a high degree of vibration reduction. The sensitivity of SATLCD to the frequency offset between the damper and structure can be improved by adapting its frequency precisely to the measured structural frequency.

• The Journal of Korean Association of Computer Education
• /
• v.12 no.5
• /
• pp.87-94
• /
• 2009

This paper presents a Web-based interactive and adaptive learning system that helps students learn the pumping lemma for the family of regular languages. Our system allows the students to proceed with their learning according to their individual differences through Web-Based Instruction and gives them opportunities for the interaction so that they can practice exercise related to the learning and gain feedbacks on the results of the exercises immediately. Especially, the system provides adaptive scaffolding that helps learners understand each step for the proof of the pumping lemma. Unlike existing systems that support learning the pumping lemma, the proposed system defines possible errors in advance and provides appropriate messages for corresponding errors. In addition, the system allows the learners to decompose a string into three parts so that they can understand the pumping lemma precisely.

• Journal of Venture Innovation
• /
• v.6 no.2
• /
• pp.101-121
• /
• 2023

The purpose of this study was to investigate the impact of issue leadership by sales managers on sales team performance, while examining the mediating role of team adaptive sales behavior and the moderating effect of team-member exchange (TMX). Data was collected from 125 sales teams, and both independent and dependent variables were measured with a time difference of two months using responses from sales managers and team members. The empirical analysis revealed several important findings. Firstly, the study found that issue leadership had a significant positive effect on sales team performance. Secondly, team adaptive sales behavior was found to partially mediate the relationship between issue leadership and sales team performance. Lastly, the study revealed that TMX moderated the relationship between issue leadership and sales team performance. These findings have significant academic and practical implications. Firstly, the study demonstrates the effectiveness of issue leadership as a sales leadership style in the B2C industry. Secondly, it highlights the importance of team adaptive sales behavior as a mechanism that mediates the relationship between issue leadership and sales team performance. Lastly, it underscores the significance of TMX as a situational factor that moderates the relationship between issue leadership and sales team performance. In practice, the results suggest that organizations should focus on developing issue leaders, fostering creative sales behavior at the team level, and activating social exchange within sales teams to enhance sales team performance.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.869-872
• /
• 2001

Blind identification and equalization of communication channel is important because it does not need training sequence, nor does it require a priori channel information. So, we can increase the bandwidth efficiency. The linear prediction error method is perhaps the most attractive in practice due to the insensitive to blind channel estimator and equalizer length mismatch as well as for its simple adaptive algorithms. In this paper, we propose method for fractionally spaced blind equalizer with arbitrary delay using one-step forward prediction error filter from second-order statistics of the received signals for SIMO channel. Our algorithm utilizes the forward prediction error as training sequences for data estimation and desired signal for channel estimation.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2113-2116
• /
• 1997

The speed sensorless vector control of induction motor using the rotor speed and flux estimation is widely used. In practice, these schemes depend on the accurate parameters of the machine. If in the vector control scheme an inaccurate parameter of induction motor due to skin effects and to temperature variations is used. it is difficult to achieve correct field orientation. From this reason. we propose robust speed sensorless vector control of induction motor against the variations of parameter and disturbance by using extended Kalman filter. For speed and rotor flux estimation. conventional adaptive flux observer is applied. extended Kalman filter which is correctly capable of estimating rotor flux and load by eliminating virtually influences of structural noises is proposed. Simulation results show the effectiveness of the control strategy proposed here for the induction motor drives.

• Communications for Statistical Applications and Methods
• /
• v.12 no.3
• /
• pp.713-727
• /
• 2005

Among different regression approaches, nonparametric procedures perform well under different conditions. In practice it is very hard to identify which is the best procedure for the data at hand, thus model combination is of practical importance. In this paper, we focus on one dimensional regression with fixed design. Polynomial regression, local regression, and smoothing spline are considered. The data are split into two parts, one part is used for estimation and the other part is used for prediction. Prediction performances are used to assign weights to different regression procedures. Simulation results show that the combined estimator performs better or similarly compared with the estimator chosen by cross validation. The combined estimator generates a similar risk to the best candidate procedure for the data.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.501-508
• /
• 2009

This paper proposes an efficient transform-domain noise reduction scheme in an H.264 video encoder, where the generalized Wiener filtering is performed in a quantization process by multiplying each transform block with its adaptive multiplication factor. In practice, the computational complexity of the proposed scheme is negligible by replacing the multiplication operation with a simple look-up table method. Also, experimental results show that the proposed scheme provides outstanding noise reduction performance in an H.264 video encoder.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.185-189
• /
• 2001

In order to prevent the production defects the optimum design of product, jig and fixture putting in the field is very significant manufacturing method. Drilling Jig is the device according to industrial demand for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with jig and fixture for mass production is a specific division. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and jig & fixture structure, machining condition for tool making, tool materials, heat treatment of jig & fixture components, know-how and so on. In this study we designed and constructed a drilling jig of mass production and performed tryout under the Auto CAD, Auto Lisp database, that we made by database, and window environment. Especially this study is reveals with the analysis of part drawing, jig planning, jig design etc, and then the result of drill jig's making try out.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.670-677
• /
• 1998

Many of the adaptive noise control systems utilize a form of the least mean square (LMS) algorithm. In the active control of noise, it is common practice to locate an error microphone far from the control source to avoid the near-field effects by evanescent waves. Such a distance between the control source and the error microphone makes a certain level of time-delay inevitable and, hence, may yield undesirable effects on the convergence properties of control algorithms such as filtered-x LMS. This paper discusses the dependence of the convergence rate on the acoustic error path in these popular algorithms and introduces new algorithms which increase the convergence region regardless of the time-delay in the acoustic error path. Performances of the new LMS algorithms are presented in comparison with those by the conventional algorithms based on computer stimulations and experiments.