• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1189-1196
• /
• 2001

When fluid flows at high speed over an open cavity, large acousitc pressure is produced by fluid/structure interaction at the downstream edge of the cavity. The goal of this paper is suggestion of effective control method to suppress the noise generated from cavity and numerically simulation of active control. The cavity instability mechanism is simulated and a close-loop control algorithm is implemented. The effects of the actuator and some control function are discussed. The compressible Navier-Stokes equations are solved with the high-order and high-resolution numerical schemes to precisely simulate the interaction between flow and acoustic. The results show that noise is effectively suppressed with the control method suggested in this paper.

• Natural Product Sciences
• /
• v.28 no.2
• /
• pp.89-92
• /
• 2022

In Asia, the roots of Paeonia lactiflora and Astragalus membranaceus have been used as therapeutic agents for thousands of years. Once the medicinal plants are harvested, they are dried and their ingredients are extracted by heat-mediated reflux extraction. However, the condensed structure of organic products (especially roots) limits the extraction of bioactive components. In this study, we assessed the effect of the puffing method (using high temperature and pressure) before the extraction process in relation to the profile and antioxidant capacity of active ingredients. We demonstrated that the additional puffing process before extraction methods improves the yield of polyphenol concentrations and antioxidant activities from the roots of P. lactiflora and A. membranaceus.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.353-359
• /
• 2020

In this study, the controller structure and control algorithm of medical robot bed developed for pressure ulcer prevention and healing are described. The existing pressure ulcer prevention mattress is operated manually and the remaining maximum body pressure exceeds the pressure of ulcer generation, so there is always room for pressure ulcers. However, the system developed in this study does not generate the pressure ulcers because the body pressure drops to zero when the keyboard of the bed descends using the active electric driving keyboard. In addition, even if the bed is raised and the pressure above the critical body ulcer pressure is abnormal, the device and the control algorithm are designed so that the lasting time is within the pressure ulcer generation critical time and the pressure ulcer itself is not generated. The bed key board motor is a motor designed with the BLDC servos suitable for medical use and these can communicate each other easily through CAN(Car Area Network). The system is new medical robot bed that is effective in preventing pressure ulcers and will be distributed to many patients suffering from pressure ulcers.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.466-470
• /
• 2007

Purpose: Active prevention is an essential component in reducing the development of pressure sores. For the high-risk patient group, following the certified pressure sore screening scale as well as educating the patient and the nurses who care for them can lead to optimal management of these patients. Applying a risk assessment scale along with a prevention strategy can reduce medical costs and length of stays at the hospital. The purpose of this study is to evaluate the efficacy of a new pressure sore risk assessment scale based on the universally recommended Braden scale and our prevention program. Methods: From June to August, 2003, our pressure ulcer risk assessment scale was applied to a total of 1882 patients admitted to the experimental group (intensive care unit, neurosurgery, general surgery, and oncology units). It was based on Braden scale. We analysed sensitivity, specificity, positive and negative predictive value and ROC curve to evaluate its efficacy. Pressure ulcer prevention program was composed of patient's education using protocol and specific nursing care. The incidence of pressure ulcers was also measured during the 3 months period, and those were compared to the control group of 1789 patients from March to May, 2002. Results: 118(6.27%) of the experimental group were high-risk with an incidence of pressure ulcers measuring 4 (0.21%). Sensitivity, specificity, positive and negative predictive value of our scale were 100%, 94%, 4%, 100%, respectively, and AUC(area under the curve) was 0.992. In the control group, the incidence of pressure ulcers was 11(0.61%). Statistical analyses using chisquared tests with a significance level of 5%, the results were such that ${\chi }^2=3.6482$(p=0.0561). The results proved to be statistically significant in borderline. Conclusion: The results from this study proved that pressure sore risk assessment scale based on Braden scale has an excellent efficacy, and shows that our pressure ulcer prevention program is partially effective in reducing pressure ulcer incidence.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.311-324
• /
• 2014

The Hongjeom formation of the Pyeongan Supergroup in the Munkyeong coalfield mainly consists of metapsammite and metapelites. Metampelites occur as slate preserving chloritoid+chlorite+muscovite and andalusite+biotite+chlorite+muscovite mineral assemblages. Chloritoid and andalusite occur as porphyroblast, and the matrix composed of fine-grained micas. Metamorphic P-T conditions for these mineral assemblages are $510-520^{\circ}C$ and 3.0-3.5kbar based on P-T pseudosection in $MnO-K_2O-FeO-MgO-Al_2O_3-SiO_2-H_2O(MnKFMASH)$ system and isopleth intersections of Fe/(Fe+Mg) ratios in chloritoid and chlorite. The medium temperature and low pressure metamorphism resulted from a higher geothermal gradient ($40-45^{\circ}C/km$) condition than that of burial metamorphism. The youngest (SHRIMP U-Pb age; ca. 327-310 Ma) detrital zircon grains from the Hongjeom formation display oscillatory zoning and relatively high Th/U ratio (0.60-1.12). Based on the previous sedimentary, paleontological, and geochronological studies in the Taebaeksan basin together with results of this study, we suggest that (1) initial deposition of the Hongjeom formation was contemporaneous with a magmatic activity in the provenance, (2) the Pyeongan Supergroup was deposited in an arc-related basin at an active continental margin during the Carboniferous to Permain, and (3) magmatic activities occurred repetitively in relatively short interval in the active continental margin had continuously supplied sediments to the basin.

• Ocean and Polar Research
• /
• v.32 no.2
• /
• pp.157-164
• /
• 2010

A marine alga, Spirulina maxima, was extracted under high pressure and low temperature conditions at 500 MPa and $60^{\circ}C$ for 5 and 10 min. A high pressure of 500 MPa was applied to improve process yields because of low temperature extraction. This method resulted in highest higher extraction yield of 26.1% (w/w) in comparison to those results obtained from conventional extraction methods which produced a yield of 17.6% (w/w) from water. The extracts from this process also showed 19% of low cytotoxicity against human normal fibroblast cells in adding 1.0 mg/ml of the highest concentration. The crude extract significantly reduced the production of Prostaglandin $E_2$ ($PGE_2$) from CCD-986sk cells and increased nitric oxide production by macrophages. These higher activities of enhancing skin immune functions were found to have high antioxidant extract properties, like a 98% increase in DPPH radical scavenging activity. The extracts from the high pressure process showed a higher elution of active components than other processes and generated new compounds based on HPLC analysis. This clearly indicates that the extracts from high pressure and low temperature conditions have higher skin immune activation properties that have not been previously reported.

• Journal of Hydrogen and New Energy
• /
• v.29 no.2
• /
• pp.170-180
• /
• 2018

After $MoS_2$ catalyst was prepared at 1, 30, and 70 atm, the hydrothermal pressure effect over preparation of $MoS_2$ was investigated in terms of catalyst characterization and direct methanation. Multifaceted characterization techniques such as XRD, BET, SEM, TPR, EDS, and XPS were used to analyze and investigate the effect of high pressure over the preparation of surface and bulk $MoS_2$ catalyst. Result from XRD, SEM, and BET demonstrated that $MoS_2$ was more dispersed as preparation pressure was increased, which resulted finer $MoS_2$ crystal size and higher surface area. EDS result confirmed that bulk composition was $MoS_2$ and XPS result showed that S/Mo mole ratio of surface was about 1.3. TPR showed that $MoS_2$ prepared at 30 atm possessed higher active surface sites than $MoS_2$ prepared at 1 atm and these sites could contribute to higher CO yield during methanation. Direct methanation was used to evaluate the CO conversion of the both catalysts prepared at 1 atm and 30 atm and reaction condition was at feed mole ratio of $H_2/CO=1$, GHSV=4800, 30 atm, temperature($^{\circ}C$) of 300, 350, 400, and 450. $MoS_2$ prepared at 30 atm showed more stable and higher CO conversion than $MoS_2$ prepared at 1 atm. Faster deactivation was occurred over $MoS_2$ prepared at 1 atm, which indicated that preparation pressure of $MoS_2$ catalyst was the dominant factor to improve the yield of direct methanation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.973-980
• /
• 2015

With their wide geographical distribution, unconventional resources are continuously compared against conventional resources, but their development is expanding because TRRs (Technical Recoverable Resources) are similar to conventional resources. In particular, there is active development of unconventional gas resources such as shale gas, tight gas, CBM (coalbed methane) and gas hydrate. However, it is difficult to calculate the material properties of unconventional resources, especially the gas content, with current geophysical logging technology. Additionally, some overseas companies have monopolies on related equipment and materials. Therefore, this study developed a reservoir PCS (Pressure Core Sampler). It can collect core samples without gaseous loss by maintaining high pressure from the moment the core is sampled and record pressure and temperature in real time. Successful performance testing was also carried out for official verification of the manufactured PCS. The reservoir PCS will contribute to the acquisition of geophysical well logging data as well as accurate and reliable cores.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.101-108
• /
• 2004

For the last 30 years, the use of EPS as a lightweight filling material has grown significantly throughout the world. The fields of applying EPS block have also increased. The most representative example in geotechnical applications is using EPS block as a compressible inclusion that causes the reduction of static earth pressure on earth-retaining wall, bridge abutment and pipes. EPS blocks have a good workability by its lightweight characteristic and a uniform engineering property with the change of its density. Also EPS blocks have best material property as a compressible inclusion. This paper analyzes that the compressible inclusion function of EPS causes the reduction of static earth pressure on retaining wall and concrete box culvert. A series of in-situ tests were conducted to evaluate the reduction of static earth pressure using EPS inclusion. Based on in-situ test, it is found that the magnitude of static earth pressure was reduced to about 20% for the retaining wall and about 45∼53% for the box culvert compared with theoretical active earth pressure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.52-64
• /
• 1996

This paper presents an active position control of a single-rod cylinder system featuring an electrorheological(ER) fluid-based valve. The ER fluid consisting of silicone oil and chemically treated particles is firstly composed and its Bingham property is tested as a function of imposed electric field. A multi-channel plate type of ER valve is then designed and manufactured on the basis of the field-dependent Bingham model. Performance test of the ER valve is undertaken by evaluating pressure drop with respect to the number of electrode as well as the intensity of the electric field. Subsequently, the ER valve-cylinder system is constructed and its governing equation of motion is derived. A neural control scheme for position control of the cylinder is formulated by incorporating proportional-plus-derivative(PD) controller and implemented. Experimental results of both regulating and tracking control responses are presented in order to demonstrate the efficacy of the proposed ER valve-cylinder control system.