• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.11-19
• /
• 2019

The waveguide slotted active phased array radar is characterized in that the beam is tilt in a specific direction when the feeding position of the antenna is not in the center of the antenna. If the beam deflection phenomenon is not properly compensated, error bias is generated in the target information collected by the radar, and the target accuracy is lowered. In this paper, we describe a technique to compensate the error of the target information that is collected in the active phased array radar of the waveguide slot type instead of the center of the antenna.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.54-62
• /
• 1994

This paper presents active control methodologies to suppress structural deflections of a composite beam using a distributed piezoelectric-film actuator and sensor. Three types of different controllers are employed to achieve vibration suppression. The controllers are established depending upon the information on the velocity components of the structrue and on the deflection magnitudes as well. They are constant-amplitude controller(CAC), constant-gain mcontroller(CGC), and constant-amplitude-gain controller(CAGC). For the minimization of the residual vibration (chattering in a settled phase), which is the practical shortcoming of the conventional CAC dur to time delay phenomenon of the hardware system, a new control algoritym CAGCis designed by selecting switching constants in an optimal manner with respect to the initial tip deflection and the applied voltage. The experimental investigations of the transient and forced vibration control for the first vibrational mode are undertaken in order to compare the suppression efficiency of each control algorithm. Moreover, simultaneous controllability of various vibrational modes through the proposed scheme is also experimentally verified by pressenting both the transfer function and the phase.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.171.1-171.1
• /
• 2015

Carbon nanotube emitters is very promising electron emitter for electron beam applications. We introduced the carbon nanotube electron beam (C-beam) exposure technic using triode structure. As a source, the electron beam emit from CNT emitters placed at the cathode by high electric field. Through the gate mesh, with high accelerating energy, the electron can be extracted easily and impact at the anode plate. For thin film modification, after the C-beam exposure on the amorphous silicon thin film, we found phase changes and it showed a high crystallinity from the Raman measurement. We expect that this crystallized film will be a good candidate as a new active layer of TFT.

• 한국전자파학회논문지
• /
• 제27권7호
• /
• pp.625-634
• /
• 2016

소자 단위에서 디지털로 신호를 수신하는 완전 디지털 수신 능동위상배열안테나는 최종적인 수신 빔을 디지털 빔형성 방법으로 합성하므로 일반적인 근접전계 시험 방법을 적용하기 어렵다. 따라서 본 논문에서는 완전 디지털 수신 능동위상배열안테나를 시험하기 위한 근접전계 수신 시험 구성과 방법을 제시하였다. 또한, 디지털 빔 합성 과정과 잡음 합성 과정을 토대로 근접전계 수신 시험을 통해 수신 빔 패턴 뿐 아니라, 수신 성능을 대표하는 안테나의 이득 대비시스템 잡음 온도의 비(G/T)를 측정하는 방법을 제시하고, 실제 개발된 L-밴드 장거리레이다용 완전 디지털 수신 능동위상배열안테나를 이용하여 검증한 결과를 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2251-2253
• /
• 2003

This paper is concerned with the active vibration control of flexible cantilever beam system using electromagnetic force actuator. The main objective of this paper is to propose the control algorithms and implement the experimental setups for active vibration control. Several control algorithms are proposed and implemented on the experimental setups to show their efficacy. These include a PID control design, an optimal $H_2$ control design, and a fuzzy PID control design. Effectiveness and performance of the designed controller were verified by both simulation and experiment results.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.134-140
• /
• 2021

In this paper, I introduce a novel design method of a high performance nanophotonic beam deflector providing broadband operation, large active tunability, and signal efficiency, simultaneously. By combining thermo-optically tunable vanadium dioxide nano-ridges and a metallic mirror, reconfigurable local optical phase of reflected diffraction beams can be engineered in a desired manner over broad bandwidth. The active metagrating deflectors are systematically designed for tunable deflection of reflection beams according to the thermal phase-change of vanadium dioxide nano-ridges. Moreover, by multiplexing the phase-change supercells, a robust design of actively tunable beam splitter is also verified numerically. It is expected that the proposed intuitive and simple design method would contribute to development of next-generation optical interconnects and spatial light modulators with high performances. The author also envisions that this study would be fruitful for modern holographic displays and three-dimensional depth sensing technologies.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1061-1070
• /
• 2009

본 논문에서는 전기적으로 크기가 큰 능동 위상 배열 안테나에서 발생하는 빔-편이(beam-squint)현상을 해결할 수 있는 시간 지연기를 설계 및 제작하고, 측정 결과를 고찰한다. 시간 지연기는 4-bit 스위치로 제어되는 마이크로스트립 라인으로 설계되었으며, 시간 지연 구조의 손실을 보상해 주기 위해 송수신 경로에 MMIC 증폭기 모듈을 추가하였다. 시간 지연기의 측정을 통해 지연 상태별 이득 및 위상, P1dB, 수신 잡음 지수 등의 전기적 성능 규격을 만족함을 확인하였다. 또한, 제작된 시간 지연기의 성능 검증을 위해 측정 결과를 광대역 능동위상 배열 안테나에 적용하여 빔 패턴 보정 효과를 확인하였다. X 밴드 대역에서 800 MHz 대역차를 갖는 675.8 mm 크기의 안테나에 대해 빔 편이 현상을 보정해 본 결과 ${\pm}0.1^{\circ}$이던 주파수에 따른 조향각 오차가 ${\pm}0.1^{\circ}$ 이내로 줄어드는 효과를 확인하였으며, 향후 광대역 능동 위상 배열 안테나 시스템에 적용 가능성을 확인하였다.

• 소음진동
• /
• 제11권2호
• /
• pp.292-300
• /
• 2001

This research is concerned with the validation of the modeling technique and controller design for slewing beam structures. When cantilever beam rotates about axes perpendicular to the undeformed beam's longitudinal axis, it experiences inertial loading. Hence, the beam vibrates from the initial stage of slewing. In this paper, the analytical model for a single slewing flexible beam with surface bonded piezoelectric sensor and actuator is developed using the Hamilton's principle with discretization by the assumed mode method. Comparisons with the theoretical model are made based upon the frequency responses and time responses. A new factor called the coupling coefficient is introduced to incorporate the discrepancies between the theoretical and experimental results. The slewing is achieved by applying the PID control, which is found to be less sensitive to vibrations. The vibrations are controlled by PPF controller, which is found to be effective in suppressing residual vibrations after slewing. The vibrations occurred during slewing is difficult to control because the piezoceramic actuator is not powerful enough to overcome inertial loadings.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.342-350
• /
• 2014

An active stimulating device, such as a fluttering net or canvas attached to the end of a cod end generating a shaking motion, could help to encourage the escape of juvenile fish positioned passively near the net. Field fishing trials using a shrimp beam trawl were carried out to examine the effect on the reduction of juvenile fish or other discard catch by generating a shaking movement of the cod end using an unbiased cap-like round canvas. The mean period of the shaking motion with the round canvas was ~14 s, and the mean amplitude was 0.4 m as measured by peak event analysis and the global wavelet method. The bycatch of juvenile fish in 14 trials decreased by ~30% and by ~25% using a steady cod end for the total bycatch using a shaking cod end in the shrimp beam trawl, while the marketing catch was similar between steady and shaking cod ends. There was no difference in the body size of the shrimp or fish and species composition between the steady and shaking cod ends. Above results demonstrate a new method for bycatch reduction using an active stimulating device, although more detailed studies are needed.

• 소음진동
• /
• 제2권3호
• /
• pp.173-180
• /
• 1992

A boundary control method that controls interior state by actively controlling the boundary conditions in boundary value problems is proposed for the vibration control of flexible beam by using piezoelectric actuators. The governing equations are derived based on the Euler beam theory and the reduced order model is obtained by modal truncation. The spillover effects caused by the uncontrolled high frequency modes are analyzed and the method selecting a suitable sensor location is also proposed. The lag compensator in digital form is realized by using a microcomputer and its peripheral devices. The efficiency of the proposed control scheme is demonstrated experimentally and compared with the simulation results.