• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.737-738
• /
• 2011

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.1-10
• /
• 2003

Shredded waste newspapers, waste acrylic raw fibers, and urea-formaldehyde (UF) adhesives, at 10% by weight on raw material, were used to produce recycled waste paper-waste acrylic raw fiber composite boards in laboratory scale experiments. The physical and mechanical properties of fire retardant treated recycled waste paper-waste acrylic raw fiber composite boards were examined to investigate the possibility of using the composites as internal finishing materials with specific gravities of 0.8 and 1.0, containing 5, 10, 20, and 30(wt.%) of waste acrylic raw fiber and 10, 15, 20, and 25(wt.%) of fire retardant (inorganic chemical, FR-7^®) using the fabricating method used by commercial fiberboard manufacturers. The bending modulus of rupture increased as board density increased, decreased as waste acrylic raw fiber content increased, and also decreased as the fire retardant content increased. Mechanical properties were a little inferior to medium density fiberboard (MDF) or hardboard (HB), but significantly superior to gypsum board (GB) and insulation board (IB). The incombustibility of the fire retardant treated composite board increased on increasing the fire retardant content. The study shows that there is a possibility that composites made of recycled waste paper and waste acrylic raw fiber can be use as fire retardant internal finishing materials.

• Composites Research
• /
• 제29권2호
• /
• pp.79-84
• /
• 2016

접착제는 구조물에 두 가지 복합재료를 연결하는 데 사용된다. 과거의 연결방식인 볼트, 리벳, 그리고 핫 멜트 방식과는 다르게 접착제의 경우 위와 같은 재료를 필요로 하지 않는다. 이는 복합재료의 경량화 및 연결부위로 인한 응력 집중점이 없다는 장점이 있다. 본 연구에서는 아크릴계 및 비스페놀-A형 에폭시계 접착제, 더 나아가 탄소나노튜브 강화재를 투입했을 때에 기계적 및 계면특성을 파악하였다. 접착제 자체의 기계적 강도 변화를 보았고, 전단 및 전단 피로실험을 통하여 물리적 특성을 파악하였다. 전단 실험 후에 파단면을 반사현미경을 통하여 관찰하였다. 실험결과 비스페놀-A계 에폭시 접착제를 사용했을 때의 인장강도 및 기계적 피로 저항성이 아크릴 접착제 보다 좋은 것을 확인했다. 또한 탄소나노튜브 입자를 에폭시 접착제에 첨가했을 때 기계적 향상을 확인했다.

• 공업화학
• /
• 제28권4호
• /
• pp.454-459
• /
• 2017

본 실험은 다양한 계면활성제를 이용해 수성 아크릴 에멀젼 접착제를 제조하고 그 특성을 조사하였다. 제조한 접착제의 특성으로 고형분, 전환율, 입도분포, 초기접착력 등의 물성을 통해 비교하였다. 접착제의 고형분을 측정한 결과는 60% 이상의 높은 값을 나타냈으며 에멀젼 중합의 전환율은 합성한 계면활성제를 2 wt% 농도로 첨가하였을 때 97%로 측정되었다. 입도분포의 분석 결과는 양이온 계면활성제를 첨가한 경우에 290~470 nm의 작은 입자의 접착제가 제조되었고 초기접착력과 접착 발현시간 또한 증가되었다. 최대 접착력은 단일의 계면활성제(POE 23)를 사용했을 때 2.55 kgf의 값을 나타냈고 다른 계면활성제를 사용한 경우보다 뛰어나다는 것을 알 수 있었다. 양이온 제미니 계면활성제를 첨가하여 제조한 접착제의 부식방지력은 48 h 동안 유지되는 것을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제49권3호
• /
• pp.199-203
• /
• 2014

아크릴 단량체인 2-ethylhexyl acrylate (2-EHA), 2-hydroxyethyl acrylate (2-HEA), isobornyl acrylate (IBOA)를 광중합을 통하여 3원 공중합체 시럽을 합성하였다. 이관능기 아크릴 단량체인 1,6-hexanediol diacrylate (HDDA), poly(ethylene glycol) diacrylate (PEGDA, Mn = 250, 575, 700)를 가교제로 사용하여 semi-IPN형 감압성 점착제 (Pressure sensitive adhesives; PSAs)를 UV-광가교 시켜 제조하였다. 가교제 변화에 따른 감압성 점착제의 점착특성, 저장탄성율, 그리고 광학특성을 고찰하였으며, 점착특성과 저장탄성율은 가교제의 화학구조와 분자량에 의존하였다. 광학특성은 모든 감압성 점착제에서 92.5 % 이상의 광투과도 (at 550 nm), 1.0 % 이하의 haze값, 0.3 이하의 색차계값을 보임을 확인하였다. 결과적으로 가교제의 종류에 영향을 받지 않음을 확인하였다.

• 폴리머
• /
• 제31권5호
• /
• pp.369-373
• /
• 2007

UV 조사에 의해 합성된 아크릴 공중합체를 주성분으로 하는 무용제형 접착제를 제조하고 이때 도입된 공단량체의 함량 및 곁사슬 길이에 따른 접착특성의 변화를 연구하였다. 접착제의 초기 접착력(adhesive force)은 상대적으로 짧은 곁사슬을 가진 공단량체의 함량에 비례하여 증가하였는데 이것은 긴 곁사슬을 가진 공단량체가 도입된 접착제에 비해 상대적으로 높은 표면에너지에 기인하는 것으로 판단된다. 박리강도 및 전단강도를 확인해본 결과, ethyl 및 n-butyl acrylate가 공단량체로 도입된 접착제는 공단량체의 함량이 증가할수록 이들 접착물성이 대체로 향상되는 반면 hexyl 및 isooctyl acrylate가 도입된 접착제는 공단량체의 함량과 접착물성간의 뚜렷한 상관관계가 관찰되지 않았다. 이것은 공단량체의 곁사슬의 길이가 증가할수록 유동성의 감소로 인해 손실탄성률의 저하를 야기시켜 박리 및 전단강도와 같은 외부 응력에 대한 저항력을 약화시키게 되는 것으로 판단된다.

• 접착 및 계면
• /
• 제12권2호
• /
• pp.67-72
• /
• 2011

Acrylic pressure-sensitive adhesives are used in many different parts in the world. But acrylic acid in PSAs may occur unexpected results such as corroding adherends or producing by-products when applied within electronic devices. This study employed acrylic PSAs based on 2-ethylhexyl acrylate (2-EHA), 2-hydroxyethyl acrylate (2-HEA) and butyl acrylate (BA) with different coating thickness. There are two types of curing agents. One is methylaziridine derivative (MAZ) and the other is aluminum acetylacetonate (AlACA). This study examined the adhesion performance and curing behaviors using peel strength, probe tack and gel fraction. Also, the viscoelastic properties of acrylic PSAs were investigated from Advanced rheometric expansion system (ARES).

• Journal of Pharmaceutical Investigation
• /
• 제31권3호
• /
• pp.181-184
• /
• 2001

The purpose of this study was to develop transdermal drug delivery system (TDDS) for the combination of physostigmine and procyclidine. The effects of various pressure sensitive adhesives (PSA) on the percutaneous absorption of procyclidine across hairless mouse skin were evaluated to select an appropriate PSA. In addition, the influences of various vehicles on the percutaneous absorption of procyclidine from PSA matrix across hairless mouse skin were evaluated using flow-through diffusion cell system at $37^{\circ}C$. Physostigmine did not have any influence on the permeation rate of procyclidine. The flux of procyclidine was the highest in silicone and PIB and was relatively lower in SIS, Acryl, and SBS adhesive matrices, however, their use was limited by the crystallization of the drug in the matrix. Among acrylic adhesives, the permeability of procyclidine was the highest from poly (ethylene oxide) grafted acrylic adhesive. Some enhancers show different enhancing effect depending on the drug, however, many of the tested enhancers showed enhancing effect for the permeation of both procyclidine and physostigmine to some extent. $Crovol^{\circledR}$ EP 40 showed the highest enhancing effect on the permeation of both compounds. The size of TDDS to provide required permeation rate was estimated to be $35\;cm^2$ based on available information.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.79-88
• /
• 1999

The stability and performance (peel strength) of the acrylic copolymer and various modified rosin systems were investigated. The peel strength was measured over a wide range of scaling rates, and the influence of the viscoelasticity of the PSA(pressure sensitive adhesive) was considered. In the case of miscible systems, the peak of peel strength (PSA performance) over wide peel rates was changed and modified systematically with increasing glass transition temperature of the blends. The peak of the peel strength for blended systems shifts toward the lower rate side as glass transition temperature ($T_g$) of the blend increased. The influence of esterification of the rosin on performance and stability against deterioration was greatly modified by blending with rosin of glycerol ester and rosin pentaerythritol ester. The failure mode of the blend varies with the combination with acrylic copolymer and modified rosin, and cohesive failure was found at a lower peel rate while interfacial failure was found at a high peel rate. A few systems where a single Tg could be measured, despite the fact that two phases were observed microscopically, were detected.

• 복식
• /
• 제57권9호
• /
• pp.67-75
• /
• 2007

The purpose of this research is to conserve of golden decoration(Jikgeumdan) of Chima(skirt) and Jeogori(Korean jacket) of the costumes excavated from Hangju Gi' tomb(17th Century) of Joseon dynasty$(1392{\sim}1910)$ and to focus on the development of conservation skill to prevent flakings of gold leaves in gilt paper strips. Up to the present, in case of golden decorations of costumes excavated from tombs of Joseon dynasty, some of gold leaves in gilt paper strips of costumes were flaked away by deterioration of adhesives in tombs. However, most of gold leaves were flaked away and totally lost by wet cleaning for eliminating contaminants after excavation. In order to prevent flaking, preliminary experiments for re-adhesion of gold leaves have been carried out. Firstly, simulation was performed using gold leaf which was available in the market. Adhesives used in this research were water-soluble adhesives(hide glue(cow, rabbit), glue made from air bladders of sciaenoid fish and Primal AC-3444 of acrylic emulsion) and solvent-soluble adhesives(acrylic adhesive Paraloid B-67 and B-72). Because of difficulty in wetting and spreading of adhesive solutions into the interface between gold leaf and Korean paper, water-soluble adhesives were not proper for adhesion of gold leaf and Korean paper. Solvent-soluble adhesives were easily infiltrated into interface between gold leaf and Korean paper and the adhesive force was also satisfied. From this result, the researchers chose more flexible Paraloid B-72$(Tg\;40^{\circ}C)$ 1% solution than Paraloid B-67$(Tg\;50^{\circ}C)$ for adhesion of gold leaf and Korean paper. Secondly, using Paraloid B-72 1% solution, the estimations of re-adhesions of gold leaves in gilt paper strips of Jeogori were carried out. When Paraloid B-72 1% solution was injected three times into the interface between gold leaf and Korean paper, the re-adhesion was most effective. On the basis of the results in these preliminary experiments, re-adhesions of gold leaves in gilt paper strips of Chima and Jeogori were carried out on condition of three times injections of Paraloid B-72 1% solution before wet cleaning. After wet cleaning, the most of the gold leaves were survived, which was confirmed by both the examination with the naked eye and the microscopic examination.