• 대한기계학회논문집B
• /
• 제32권6호
• /
• pp.413-420
• /
• 2008

The unsteady heat release characteristics play a significant role in combustion instabilities observed in low emissions gas turbine combustors. Such combustion instabilities are often caused by coupling mechanisms between unsteady heat release rates and acoustic perturbations. A generalized model of the turbulent flame response to acoustic perturbations is analytically formulated by considering a distributed heat release along a curved mean flame front and using the flame's kinematic model that incorporates the turbulent flame development. The effects of the development of flame speed on the flame transfer functions are examined by calculating the transfer functions with a constant or developing flame speed. The flame transfer function due to velocity fluctuation shows that, when a developing flame speed is used, the transfer function magnitude decreases faster with Strouhal number than the results with a constant flame speed at low Strouhal numbers. The flame transfer function due to mixture ratio fluctuation, however, exhibits the opposite results: the transfer function magnitude with a developing flame speed increases faster than that with a constant flame speed at low Strouhal numbers. Oscillatory behaviors of both transfer function magnitudes are shown to be damped when a developing flame speed is used. Both transfer functions also show similar behaviors in the phase characteristics: The phases of both transfer functions with a developing flame speed increase more rapidly than those with a constant flame speed.

• Fisheries and Aquatic Sciences
• /
• 제9권2호
• /
• pp.91-96
• /
• 2006

The movement range and diurnal behavior of 17 wild black rockfish (Sebastes schlegeli) were monitored within the marine ranching area of Tongyeong from 27 July to 7 November, 2005 using acoustic telemetry. Coded transmitters were surgically implanted into the abdomen of fish. Two of ten fish released in summer moved about 2 km away from the capture point for 1 day. The others stayed within a 500-m radius of the release point for 1 week after release. The seven fish released in autumn stayed within 500 m of the release point. Most fish were more active and had a greater range of horizontal diurnal movement at night than during the day. Additionally, the range of horizontal diurnal variation was greater in summer than in autumn. While fish released in summer were more vertically active at night than during the day, those released in autumn preferred to move vertically during the day.

• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.774-780
• /
• 2005

For the accurate inspection of the resources and space in the ocean, the method of locating the measurement equipments in the seafloor and retrieving these equipments later after a certain period of time. is generally used. In this method, the reliability of retrieving measurement equipments is very important. In our proposed remotely-controlled acoustic release system, an underwater ultrasonic wave recognition algorithm by which we can recognize the sound signal without the influence of disturbances due to underwater environment changes is developed, and a battery is used for the reduction of electric power consumption. we show the effectiveness of our proposed system through experimental results.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.221-228
• /
• 1997

A strong combustion-driven sound from a surface burner made of a perforated metal fiber plate for premixed gas was investigated to clarify the physical mechanism of its generation. A simple model was developed for the acoustic power generation in terms of the heat transfer response function and the acoustic impedance of the burner. The acoustic impedance of the perforated metal fiber placed on the open exit was measured and the heat release response of the burner to the oscillating flow associated with the acoustic disturbance was expressed in terms of a response function. It was found that the power is generated by the heat release in response to the downstream particle velocity, in contrast to the upstream velocity in the case of the Rijke oscillation driven by a heater placed in the lower half of a columm with upstream flow. The measured frequencies of the oscillation were in agreement with the estimated resonance frequencies and their excitation was varied with the combustion conditions. For the same fuel rate, the excited frequency increases with the air ratio if it is low but decreases with the ratio if not so low. Such frequency characteristics were explained by assuming a heat release response function with a time constant and it was shown that the excited frequency decreases as the time constant increases.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.1-10
• /
• 2016

연소불안정 능동제어를 위해서는 음향 발생기나 2차 연료 분사를 통해 압력 섭동이나 열방출 섭동에 변화를 주어야 한다. 2차 연료 분사의 위치 및 시점을 결정하기 위해서는 연소불안정 시 발생하는 열방출 섭동의 분포를 알아야 한다. 본 연구에서는 탄화수소 연료, 유입 속도, 당량비, 음향가진 조건을 변화시키며 위상에 따른 열방출 섭동의 분포를 실험적으로 측정하였다. 와류 발생에 따른 열방출 섭동은 $Damk{\ddot{o}}hler$ 수에 의해 크게 영향을 받는 것을 알 수 있었다. $Damk{\ddot{o}}hler$ 수가 대략 4 - 5 보다 큰 경우는 와류의 leading edge에서 hot spot이 trailing edge에서 cold spot이 발생하였다. 이와는 반대로 $Damk{\ddot{o}}hler$ 수가 3 보다 작은 경우는 반대의 경향이 나타남을 확인할 수 있었다.

• 한국연소학회지
• /
• 제19권1호
• /
• pp.29-38
• /
• 2014

This paper described an experimental investigations of combustion instability mode in a lean premixed dual swirl combustor for micro-gasturbine system. When such the instability occurs, a strong coupling between pressure oscillations and unsteady heat release excites a self-sustained acoustic wave which results in a loud, annoyed sound and may also lead a structural damage to the combustion chamber. The detailed period of flame behavior and heat release in combustion instability mode have been examined with high speed OH and CH-PLIF system and $CH^*$ chemiluminescence measurement, flame tomography with operated at 10 kHz and 6 kHz each. Experiment results suggest that unstable flame behavior has a specific frequency with 200 Hz and this frequency is accords with about 1/2 sub-harmonic of combustor resonance frequency, not fundamental frequency. This is very interesting phenomenon that have not reported yet from other previous works. Therefore, when a thermo-acoustic instability with Rayleigh criterion occurs, the fact that the period of heat release and flame behavior are different each other was proposed for the first time through this work.

• 한국연소학회지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2007

Analytical investigation of acoustic wave scattering from turbulent premixed flames was conducted to evaluate the acoustic energy amplification/damping. Such acoustic energy change is attributed to the acoustic velocity jump due to flame's heat release. Small perturbation method up to second order and stochastic analysis were utilized to formulate net acoustic energy and the energy transfer from coherent to incoherent energy. Randomly wrinkled flame surface is responsible for the energy transfer from coherent to incoherent field. Nondimensional parameters that govern net acoustic energy were determined: rms height and correlation length of flame front, incident wave frequency, incidence angle, and temperature ratio. The dependence of net acoustic energy upon these parameters is illustrated by numerical simulations in case of Gaussian statistics of flame front. Total net energy was amplified and the major factors that affect such energy amplification are incidence angle and temperature ratio. Coherent (incoherent) energy is damped (amplified) with rms height and correlation length of flame front.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.43-49
• /
• 2003

This study reveals the perceptual role of stop release burst to Koreans' recognition of POA(place of articulation) and voicing in the English word-final stops. 10 Korean subjects participated in a perception experiment wherein the stimuli are prepared on the basis of the amount of acoustic information, which includes the release burst. The result shows that i) release burst plays an important role in the recognition of POA in the order of velar, alveolar, and bilabial stops, and ii) the release burst more enhances the correct recognition of voiceless stops than that of voiced stops. This result leads us to conclude that the role of stop release burst differs with respect to the POA and voicing of the stops, and it is possibly related to the different intensity of release in voicing and in each POA.

• 한국연소학회지
• /
• 제23권1호
• /
• pp.13-20
• /
• 2018

Transverse acoustic mode in annular combustion chambers affects air-fuel mixing characteristics in the nozzle and can result in heat release fluctuations in the combustor. In addition, the acoustic mode coupling between the nozzle and the combustion chamber is one of the key parameters determining combustion instability phenomenon in the annular combustor. In this study, acoustic coupling between the nozzle and annular combustor was numerically analyzed using 3D-based in house FEM code. As a result, it was found that the acoustic mode inside the combustion chamber at anti-node locations of the transverse mode was strongly influenced by the nozzle inlet boundary conditions.

• 음성과학
• /
• 제11권4호
• /
• pp.223-232
• /
• 2004

This study investigated and compared the acoustic characteristics of the Korean stop sound [k'] in three different phonological environments: the tensified lenis stop [k'] as observed in /prek+kaci/, the fortis stop /k'/ as in /pre+k'aci/, and the fortis stop /k'/ following an obstruent as in /prek+k'aci/. The specific research question was whether or not the tensified lenis stop shares all the acoustic features with the other two kinds of fortis stops. The acoustic measures adopted in this study were H1*-H2*, VOT, length of stop closure, and $F_0$. The major findings were that the three stops showed no significant difference in all the acoustic measures except the length of stop closure. The fortis stop /k'/ following an obstruent showed significantly longer duration of stop closure than the other two stops, both of which showed no significant difference. Based on these phonetic results, this study argued that, for the proper phonological description of post-obstruent tensification, the phonological feature [slack vocal folds] of a lenis stop should be changed into [stiff vocal folds, constricted glottis] that the fortis stops should have.