• 제목/요약/키워드: acid neutralization

검색결과 245건 처리시간 0.024초

알칼리 활성화 모르타르의 메타카올린 치환율에 따른 특성 (Properties of the Alkali Activated Mortar According to Metakaolin Replacement Ratio)

  • 서동현;형원길
    • 한국건축시공학회지
    • /
    • 제16권4호
    • /
    • pp.313-320
    • /
    • 2016
  • 본 연구의 목적은 고로슬래그 베이스 AAS 모르타르의 메타카올린 치환율과 자극제 농도의 변화에 따른 역학적 특성과 내구성에 대하여 알아보는 것이다. 메타카올린은 분말도가 높아서 치환율이 높아질수록 유동성이 많이 저하되기 때문에 본 연구에서는 충분한 NaOH 수용액를 가하여 시공성을 확보한 상태에 실험을 진행하였다. 따라서 모든 시험체의 시공성을 동일하게 하는 각기 다른 Ws/B를 도출하였고, 이에 따라 시공성에 영향을 미치는 NaOH 수용액의 몰 농도별 특성에 대한 실험을 진행하였다. 또한 압축강도 측정실험, SEM을 통한 내부 미세구조 관찰, 내산성 실험 실험을 진행하였다. 본 연구 결과 메타카올린 치환율이 높은 배합은 Ww가 많이 필요로 하였지만, 그에 따른 성능 저하는 나타나지 않으며 오히려 우수한 역학적 내구적 성능을 보여주었다. 또한 [6M]보다 [8M]농도의 NaOH 자극제를 사용했을 때 메타카올린 치환 효과가 극대화 되었다.

방사성 폐기물 시멘트 고화체로 부터의 $^{137}Cs$$^{90}Sr$ 용출특성 연구 (Study on Leaching Characteristics of $^{137}Cs\;and\;^{90}Sr$ from Cement-Solidified Radwastes)

  • 황선태;이경주;최길웅;박헌휘;김환영
    • Journal of Radiation Protection and Research
    • /
    • 제10권2호
    • /
    • pp.113-121
    • /
    • 1985
  • 방사성폐기물 처리, 처분의 안정성 평가를 위하여 방사성 고화체에서 용출되는 $^{137}Cs$$^{90}Sr$의 방사능 용출율과 누적용출분율을 계측 분석하여 시멘트를 사용한 방사성 고화체에서 $Cs^+$$Sr^{++}$의 용출특성을 조사하였다. 모의방사성 폐액의 몰농도, 시멘트의 종류, 첨가물질 및 붕산농도 등을 변화시키면서 sodium silicate 법과 중화법으로 원주형 시멘트 고화체를 제작하였다. 여기에서 가압경수로형 원자력 발전소의 모의 농축폐액의 시멘트 고화체로부터 용출연구는 IAEA의 추천방법에 따라서 수행되었다. 실험결과는 대부분 이미 보고된 연구자료들과 잘 일치하고 있으나 수밀성 시멘트 고화체에서는 상당히 높은 방사능 용출율을 보여주고 있음으로써 방사성 폐기물 고화체에 그 사용이 적합하지 않음을 알게 된다.

  • PDF

연일층군 이암에서 산출되는 알루미늄 황산염 광물의 결정화학 및 생성 (I): 배사알루미나팅, 하이드로베사알루미나이트 및 메타배사알루미나이트 (Crystal Chemistry and Paragenesis of Aluminum Sulphates from Mudstones of the Yeonil Group (I): basaluminite, hydrbasaluminite, and metabasaluminite)

  • 노진환
    • 한국광물학회지
    • /
    • 제11권1호
    • /
    • pp.1-12
    • /
    • 1998
  • In Pohang area, basaluminite accompanying a little amounts of hydrobasalumnite, super-genetically occurs as whitish cryptocrystalline (2-4 $\mu\textrm{m}$) clay-like aggregates in the vicinity of altered carbonate concretions embedded within mudstones of the Tertiary Yeonil Group. A hydrobasaluminite changed readily into a basaluminite at room temperature in air, and, in turn, into a metabasaluminite when heating to 150$^{\circ}$~30$0^{\circ}C$. For the basaluminite, a monoclinic unit-cellparameters (a=14.845$\AA$, b=10.006$\AA$, c=11.082$\AA$, $\beta$=122.15$^{\circ}$) were calculated by X-ray powder diffraction data. Its basal reflections (001 and 002) are XRD analyses strongly indicate that the aluminum sulphate mineral has a layer structure and, at least, three types of water, i.e., (1) interlayer water (9.0 wt %), (2) crystal water (8.0 wt %), and (3) structural water (19.0 wt %). may present in its lattice. Based on TG-DTG data combined with EDS and IR analyses, a new chemical formula of Al5SO4(OH)134H2O was given to the basaluminite. Field occurrence and stable isotope data ($\delta$18O, $\delta$D, $\delta$34S) for the basaluminite seem to reflect that it was formed by the leached meteoric solution from surrounding mudstones during or after uplifting. An interaction of the acid solution with carbonate concretion and the resultant local neutralization of the fluid rich in Al3+ and SO42- are major controls on the basaluminite formation.

  • PDF

습식 중화반응에 의한 순환 잔골재의 품질 향상 (Quality Improvement of Recycled Fine Aggregate by Neutralization Reaction in Water)

  • 김하석;김진만;선정수;배기선
    • 한국건설순환자원학회논문집
    • /
    • 제3권2호
    • /
    • pp.146-151
    • /
    • 2015
  • 순환골재는 건설폐기물을 재활용함으로써 자원절약 및 대체자원의 개발과 환경보호의 측면에서 국가 사회적으로 많은 이점을 가지고 있다. 하지만 낮은 밀도와 높은 흡수율을 가지는 저품질 순환골재는 구조용 콘크리트 골재로 사용되지 못하고 주로 저부가가치로 사용되고 있다. 고품질 순환골재를 생산하기 위해서는 골재와 골재에 부착된 구모르타르를 효과적으로 제거해야 한다. 최근 물리적 화학적 방법을 이용하여 구모르타르를 효율적으로 제거하기 위한 연구가 행해지고 있으나, 고품질 순환잔골재의 생산 조건에 관한 정량적 연구는 아직 부족한 실정이다. 따라서 본 연구에서는 고품질 순환잔골재를 생산하기 위해서 황산과 저속습식마쇄기를 이용하여 구모르타르를 효과적으로 제거할 수 있는 최적 조건을 제시하고자 하였다. 황산의 몰비와 골재비율에 따른 순환골재의 실험결과 밀도, 흡수율, 실적율은 기준을 만족시키는 결과를 나타내고 있는 것을 알 수 있었다.

에틸렌 프로필렌 디엔 고무/메타크릴산아연 하이브리드 복합체의 제조와 물성에 관한 연구 (Preparation and Properties of EPDM/Zinc Methacrylate Hybrid Composites)

  • 장영욱;원종훈;주현석
    • Elastomers and Composites
    • /
    • 제40권1호
    • /
    • pp.59-65
    • /
    • 2005
  • 메타크릴산의 아연염인 ZMA를 EPDM고무와 직접 블렌딩하거나 또는 ZnO와 MAA의 형태로 첨가한 후 이들간의 중화반응을 유도하여 고무에 in-situ로 형성시키는 방법을 이용하여 EPDM/ZMA 복합체를 제조하였다. 인장시험, 인열시험, 열노화시험 결과 ZMA의 첨가는 EPDM의 기계적 물성 및 열노화에 대한 안정성을 현저히 향상시킬 수 있음을 알 수 있었다. 또한 ZMA의 첨가는 EPDM고무와 금속과의 접착력을 크게 향상시킬 수 있음을 알 수 있었다. 이러한 기계적물성 및 접착물성의 향상효과는 과량의 ZnO를 사용한 중화반응에 의해 ZMA를 형성시킨 복합체에서 더욱 크게 나타났다. 이는 ZMA의 도입에 의한 이온가교결합의 형성 및 고무매트리스에서의 ZMA 도메인의 분산도와 연관되는 것으로 판단되었다.

하수슬러지를 이용한 활성탄 개발에 관한 연구 (A Study on the Development of Activated Carbons from Sewage Sludge)

  • 이택룡;정찬교;조영천
    • 청정기술
    • /
    • 제15권1호
    • /
    • pp.31-37
    • /
    • 2009
  • 본 연구는 하수슬러지 탄화물과 활성화제의 화학적 활성화반응을 이용한 활성탄 제조공정을 다루고 있다. 일반적으로 활성화제로는 알칼리 약품을 이용하는데 본 연구에서는 탄소와 활성화반응이 잘 이루어지는 KOH와 NaOH를 사용하였다. 실험결과, KOH로 제조된 활성탄이 NaOH로 제조된 활성탄보다 요오드 흡착력과 비표면적(BET) 등의 물성이 우수하였다. 하수슬러지 탄화물과 활성화제의 최적 침적비율은 KOH 75 wt%, NaOH 50 wt%임을 알 수 있었다. 5 M 염산용액으로 세척하여 중화시킨 후 증류수로 세정하는 활성탄 세정방법을 사용하였다. 본 연구의 최적 실험조건에서 하수슬러지 탄화물을 이용하여 제조된 활성탄의 경우 BET표면적 값이 약 $600m^2/g$에 이르렀다.

CA2 혼입 페이스트의 부식저항성에 관한 연구 (A Study on Corrosion Resistance of CA2-Mixed Paste)

  • 김재돈;장일영
    • 한국산업융합학회 논문집
    • /
    • 제25권2_2호
    • /
    • pp.289-297
    • /
    • 2022
  • Deterioration in durability of structures due to the steel corrosion is difficult to determine whether or not corrosion is initiated and how much propagated, and moreover, repair and maintenance are not easy to deal with. Therefore, preventive treatments can be the best option to avoid the deterioration. Various methods for preventing corrosion of steel, such as electrochemical treatments, anti-corrosion agents and steel surface coatings, are being developed, but economic and environmental aspects make it difficult to apply them to in-situ field. Thus, the purpose of this study was to improve corrosion resistance by using CA-based clinker that are relatively simple and expected to be economically profitable Existing CA-based clinkers had problems such as flash setting and low strength development during the initial hydration process, but in order to solve this problem, CA clinker with low initial reactivity were used as binder in this study. The cement paste used in the experiments was replaced with CA2 clinker for 0%, 10%, 20%, and 30% in OPC. And the mixture used in the chloride binding test for the extraction of water-soluble chloride was intermixed with Cl- 0.5%, 1%, 2%, and 3% by weight of binder content. To evaluate characteristic of hydration heat evolution, calorimetry analysis was performed and simultaneously chloride binding capacity and acid neutralization capacity were carried out. The identification of hydration products with curing ages was verified by X-ray diffraction analysis. The free chloride extraction test showed that the chlorine ion holding ability improved in order OC 10 > OC 30 > OC 20 > OC 0 and the pH drop resistance test showed that the resistance capability in pH 12 was OC 0 > OA 10 > OA 20 > OA 30. The XRD analyses showed that AFm phase, which can affect the ability to hold chlorine ions, tended to increase when CA2 was mixed, and that in pH12 the content of calcium hydroxide (Ca(OH)2), which indicates pH-low resistance, decreased as CA2 was mixed

Interleukin-18 Binding Protein (IL-18BP): A Long Journey From Discovery to Clinical Application

  • Soohyun Kim;Hyeon Yu;Tania Azam;Charles A. Dinarello
    • IMMUNE NETWORK
    • /
    • 제24권1호
    • /
    • pp.1.1-1.6
    • /
    • 2024
  • IL-18 binding protein (IL-18BP) was originally discovered in 1999 while attempting to identify an IL-18 receptor ligand binding chain (also known as IL-18Rα) by subjecting concentrated human urine to an IL-18 ligand affinity column. The IL-18 ligand chromatography purified molecule was analyzed by protein microsequencing. The result revealed a novel 40 amino acid polypeptide. To isolate the complete open reading frame (ORF), various human and mouse cDNA libraries were screened using cDNA probe derived from the novel IL-18 affinity column bound molecule. The identified entire ORF gene was thought to be an IL-18Rα gene. However, IL-18BP has been proven to be a unique soluble antagonist that shares homology with a variety of viral proteins that are distinct from the IL-18Rα and IL-18Rβ chains. The IL-18BP cDNA was used to generate recombinant IL-18BP (rIL-18BP), which was indispensable for characterizing the role of IL-18BP in vitro and in vivo. Mammalian cell lines were used to produce rIL-18BP due to its glycosylation-dependent activity of IL-18BP (approximately 20 kDa). Various forms of rIL-18BP, intact, C-terminal his-tag, and Fc fusion proteins were produced for in vitro and in vivo experiments. Data showed potent neutralization of IL-18 activity, which seems promising for clinical application in immune diseases involving IL-18. However, it was a long journey from discovery to clinical use although there have been various clinical trials since IL-18BP was discovered in 1999. This review primarily covers the discovery of IL-18BP along with how basic research influences the clinical development of IL-18BP.

특이산성토에 대한 석회 및 규회석의 효과 (The Effect of Lime and Wollastonite on an Acid Sulfate Soil)

  • 박내정;박영선;이규하;김영섭
    • 한국토양비료학회지
    • /
    • 제5권1호
    • /
    • pp.25-32
    • /
    • 1972
  • 특이산성토양에서 석회 및 규회석의 효과를 검토하고 규회석중에 있는 석회와 규산의 개발 효과를 분리 해석하기 위하여 석회 및 규회석을 석회당량을 기준으로 처리하여 포장 벼 재배시험과 실내정온 담수시험을 행한 결과는 다음과 같다. 1. 석회물질로서 석회 및 규회석을 석회당량으로 시용했을때는 산성중화 효과는 꼭 같았다. 2. 석회는 반응성이어서 실내에서 토양과 잘 섞을경우에는 $25^{\circ}C$에서 3일이면 거의 중화점에 이르고 포장에서는 2주일전에 시용하여도 이앙묘에 알카리해를 주어 현저히 생육초기 분얼수을 감소시켰으나 규회석은 반응성이 약하여 1~2주후에 중화점에 이르렀고 포장에서도 전연 알카리 피해를 주지 않았다. 3. 석회, 규회석 모두 토양 및 토양용액중의 Al 함량을 같이 효율적으로 감소시키나 $Fe^{2+}$은 일정하지 않았다. 그러나 포장에서 이들의 피해증상이 미미하게 나타나는 정도로 이들 유해물질 감소에 의한 증수효과는 크게 인정되지 않았다. 4. 석회시용은 토양중 규산의 유효도를 현저히 높였고 수도체중 $SiO_2$ 함량을 현저히 증가시켰으며 규회석은 석회효과 이외에도 자체에서 $SiO_2$를 방출하여 수확기 볏짚중 $SiO_2$ 함량을 더욱 증가시켰다. 5. 따라서 석회물질시용시 식물체중 규산의 흡수를 증가시킴으로서 목도열병 이병율을 감소시키고 등숙율을 높임으로서 증수효과를 얻을수 있었다. 6. 석회, 규회석중 어느하나를 시용함으로서 다른것의 효과를 현저히 감소시켰다. 7. 규회석은 생육초기 분얼수 증가에 현저한 효과가 있었으나 유효경비율의 감소로 주당수수의 증가는 없었다. 8. 이들 석회물질은 수당입수를 어느 정도 증가시키는 경향이었다.

  • PDF

방향족/지방족 혼합 Diisocyanate를 포함하는 Polyurethane 분산체의 제조와 성질 (Preparation and Properties of Polyurethane Dispersions with Aromatic/Aliphatic Mixed Diisocyanate)

  • 김형석;노시태
    • 공업화학
    • /
    • 제20권3호
    • /
    • pp.258-265
    • /
    • 2009
  • Poly(tetramethylene glycol) (PTMG, Mw = 2000), dicyclohexylmethane-4,4'-diisocyanate $(H_{12}-MDI)$와 4,4'-diphenylmethane diisocyanate (MDI)의 이소시아네이트 혼합물, 그리고 음이온기로서 dimethylol propionic acid (DMPA)를 사용하여 프리폴리머 혼합법으로 음이온성 폴리우레탄 분산체(PUD)를 합성하였다. 프리폴리머의 중화제로서는 triethylamine (TEA)을, 그리고 프리폴리머의 가지연장제로는 ethylene diamine (EDA)를 사용하였다. DMPA의 몰비율과 혼합이소시아네이트에서 방향족 이소시아네이트의 함양이 PUD의 입자크기와 점도변화에 미치는 영향을 연구하였다. 그리고 또한 DMPA의 몰비율과 방향족 이소시아네이트 함양 변화에 따른 PUD 도막의 기계적 성질과 열적 성질에 대해서도 논의하였다. DMPA의 몰비율이 증가할수록 음이온성 PUD의 입자크기와 점도가 감소하였으나, 동일한 DMPA 함량에서는 이소시아네이트 혼합물 중 방향족 이소시아네이트의 함량이 증가 할수록 입자의 크기와 점도가 증가하는 경향을 나타냈다. 혼합 이소시아네이트의 몰비율이 일정할 때 PUD 도막의 인장강도는 DMPA의 함량이 증가함에 따라 증가하였으나, 신장율은 감소하였다. PUD 도막의 열분해 온도에 있어서, DMPA 함량에 대한 영향은 크게 나타났으나, 방향족 이소시아네이트 함양의 영향은 DMPA 함량이 낮은 조건에서는 상대적으로 크지 않았다.