• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.5
• /
• pp.334-341
• /
• 2019

This study proposes the control strategy for the seamless mode transfer of indirect current controlled parallel grid-connected inverters. Under the abnormal grid condition, the grid-connected inverter can convert the operation mode from grid-connected to stand-alone mode to supply power to the local load. For a seamless mode transfer, the time delay problems caused by the accumulated control variable error must be solved, and the indirect current control method has been applied as one of the solutions. In this study, the design of control parameters for the proportional-resonant-based triple-loop indirect current controller and the control strategy for the seamless mode transfer of parallel grid-connected inverters are described and analyzed. The validity of the proposed mode transfer method is verified by the PSiM simulation results.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.117-128
• /
• 2005

This study proposes an integrated monitoring system for data reliability improvement in a steel manufacturing industry. The data obtained from existing steel manufacturing process is not micro data which is gathered at the occurring point, but average value (macro data) which is gathered from the occurring point to ending point. This kind of macro data is not only difficult for a detailed analysis for an error causing factor, but it might cause a fatal influence as well on the quality of produced goods even if the error is within an error tolerance. And during the process of steel production, thousands of data is produced in a second, thus requiring database plan to manage abundant amount of data. Therefore, the following proposed system is capable of collecting as well as analyzing all the data generated from the process of product production. And the system was able to raise the efficiency of the database server by planning the database to handle large capacity data. Also, by applying web-based technology, inquiries and analysis of data with no limit on time and space was possible with PC connected to the intranet. Hence, the system was able to work on effective quality improvement of manufactured products, plus able to raise the reliability of the product. Also, accumulated data from long period of time was used for fundamental material for new controlling model, operation technology, and new product development.

• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.1-8
• /
• 2017

A smart leveling equipment was developed in this study by improving present leveling equipment. Both hardware and software of the equipment was developed and several accuracy tests of bench mark were conducted using various survey equipments. National control point (UO992-A), control points (15-00-06-24)-B and (15-00-06-23)-C were used for the accuracy test. As a result, the stable results in the range of errors were obtained in the cases of auto-level and digital level. Approximately 24mm error in the section of A-B and 26mm of B-C section was occurred in Smart Level equipment. This is due to the lack of technology completion and errors via relatively many numbers of installation tests. 46mm error of RMSE of smart level survey was occurred through the difference of section test. A small error was detected in short range but errors were accumulated far from the bench mark. It's concluded that an in-depth study emphasizing accuracy improvement can be practically applied to the various areas of industry.

• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.214-220
• /
• 2012

Deformation behaviour of rock mass around an opening measured during tunnel excavation is very important in order to assess the stability of the tunnel. Unfortunately displacement measured only after the installation of displacement measuring device can be acquired, which results in inevitably excluding the pre-displacement occurred and accumulated before the displacement measuring devices are installed. So it is very important to consider the pre-displacement based on the elapsed time before zero reading after deformation behaviour started. In this study, the accuracy of total estimated displacement depending on the distance between face and measurement position is calculated by statistical non-linear fitting on measurable displacement data. Besides, the influence of the unavoidable measurement error is considered by using Monte-Carlo simulation. As a result, the faster the initial reading started and the smaller the measurement error is, the higher the accuracy of estimating total displacement is obtained.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.425-431
• /
• 2011

Purpose: For better understanding refractive error in Korean children and teenagers, a follow-up study on the changes of refractive error was performed in 1~13-year-old subjects for ten years. Methods: Among the people who had visited an ophthalmologic hospital in Seoul to examine the visual acuity and to correct refractive error from 2000 to 2010 years, 223 subjects (364 eyes) having the corrected visual acuity over 0.7 had been investigated the changes of spherical equivalent power of the cycloplegic clinical refraction and manifest clinical refraction from the accumulated medical record data for ten years. Results: The changes of spherical equivalent power for ten years in 1 to 13 years old were shown the highest change at 7-year-old. And annual change of spherical equivalent power was shown the highest change at from 9-year-old to 10-year-old (-0.64${\pm}$0.64 D) followed by from 8-year-old to 9-year-old (-0.64${\pm}$0.81 D). Conclusions: The changes of refractive error for Korean children and teenagers aged 1 to 13 years in an optometric practice were shown the tendency to proceeding to myopia with age, especially the largest increase at from 7-year-old to 10-year-old, and this period is important for vision care.

• Geomechanics and Engineering
• /
• v.15 no.5
• /
• pp.1081-1089
• /
• 2018

The deformation and strength of brittle rocks are significantly influenced by the crack closure behavior. The relationship between the strength and deformation of rocks under uniaxial loading is the foundation for design and assessment of such scenarios. The concept of relative crack closure strain was proposed to describe the influence of the crack closure behavior on the deformation and strength of rocks. Considering the crack compaction effect, a new damage constitutive model was developed based on accumulated AE counts. First, a damage variable based on the accumulated AE counts was introduced, and the damage evolution equations for the four types of brittle rocks were then derived. Second, a compaction coefficient was proposed to describe the compaction degree and a correction factor was proposed to correct the error in the effective elastic modulus instead of the elastic modulus of the rock without new damage. Finally, the compaction coefficient and correction factor were used to modify the damage constitutive model obtained using the Lemaitre strain equivalence hypothesis. The fitted results of the models were then compared with the experimental data. The results showed that the uniaxial compressive strength and effective elastic modulus decrease with an increase in the relative crack closure strain. The values of the damage variables increase exponentially with strains. The modified damage constitutive equation can be used to more accurately describe the compressive deformation (particularly the compaction stage) of the four types of brittle rocks, with a coefficient of determination greater than 0.9.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.109-114
• /
• 2015

Frame synchronization is achieved by correlation between received symbols and a preamble pattern which is periodically appended at a frame header. In this paper, we deal with a frame detection method complaint with satellite-based DVB-S2 system. In DVB-S2, frame synchronization is performed under the low signal-to-noise ratio(SNR), a large frequency offset which can be up to 20% of a symbol transmission rate and unknown modulation schemes ranging from QPSK to 32-APSK. In this environment, we propose a method combining differential correlation based on SOF and PLSC with an accumulated correlation method for the detection of frame structures. In addition, detection performances about mean acquisition time(MAT) and detection error probability are evaluated via computer simulations.

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.183-193
• /
• 1997

The amount and kinds of radionuclide contained in waste volume should be known to prepare for occupational exposure management, perform safety assessment and finally to license a repository. Although the volume of filters and resins are small, activities of them comprise most of the radioactivity that made during power generation. This study aims at developing a method of estimating the radionuclide accumulation at the filters and resins of coolant systems. In this study, accumulated amount of radionuclides is estimated by a computer program which makes use of instantaneous decontamination factor, DF, instead of average DF. A FORTRAN program was developed for the estimation. Data from in-plant source-term measurements at Rancho-Seco nuclear power plant in the United States are employed for verification of the estimating method. And experimental data are employed, too. The instantaneous-DF-method showed smaller error than the average-DF-method. Accumulated amount of radionuclides can be calculated with only the DF and the radionuclide concentration, which are measured periodically according to the operating guide. However, especially, when the operating condition of nuclear power plant changes rapidly, the measuring term of DF and radionuclide should be shortened to ensure the accurate estimation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.249-254
• /
• 2013

A fast multiplier and ADC are essential to process the analog signals in real time. The double-base number system(DBNS) is known as an efficient method for this purpose. The DBNS uses the numbers 2 and 3 as the base numbers simultaneously. The system has an advantage of fast multiplication, less chip area, and low power consumption compared to the binary multiplier. However, the inherent errors of the log number's intrinsic tolerance in DBNS are accumulated in a FIR digital filter, so the signal-to-noise ratio(SNR) has a tendency to be degraded. In this paper, the nonlinear encoder of ADC is designed to compensate the accumulated errors of DBNS by analysing the error distributions of various filter coefficients. The new ADC does not sacrifice its own advantages because the encoder circuits are modified only. The experiments were done with an FIR filters those were designed to have -70dB of SNR in stop band. The proposed nonlinear ADC encoder could drop the SNR to -45dB in stop band, in contrast to -35dB with the linear encoder.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.420-428
• /
• 2016

For more than 50 years, satellite images have been used to monitor crop growth. Currently, unmanned aerial vehicle (UAV) imagery is being assessed for analyzing within field spatial variability for agricultural precision management, because UAV imagery may be acquired quickly during critical periods of rapid crop growth. This study refers to the derivation of growth estimating equation for highland Kimchi cabbage using UAV derived normalized difference vegetation index (NDVI) and agro-meteorological factors. Anbandeok area in Gangneung, Gangwon-do, Korea is one of main districts producing highland Kimchi cabbage. UAV imagery was taken in the Anbandeok ten times from early June to early September. Meanwhile, three plant growth parameters, plant height (P.H.), leaf length (L.L.) and outer leaf number (L.N.), were measured for about 40 plants (ten plants per plot) for each ground survey. Six agro-meteorological factors include average temperature; maximum temperature; minimum temperature; accumulated temperature; rainfall and irradiation during growth period. The multiple linear regression models were suggested by using stepwise regression in the extraction of independent variables. As a result, $NDVI_{UAV}$ and rainfall in the model explain 93% of the P.H. and L.L. with a root mean square error (RMSE) of 2.22, 1.90 cm. And $NDVI_{UAV}$ and accumulated temperature in the model explain 86% of the L.N. with a RMSE of 4.29. These lead to the result that the characteristics of variations in highland Kimchi cabbage growth according to $NDVI_{UAV}$ and other agro-meteorological factors were well reflected in the model.