Abstract
Frame synchronization is achieved by correlation between received symbols and a preamble pattern which is periodically appended at a frame header. In this paper, we deal with a frame detection method complaint with satellite-based DVB-S2 system. In DVB-S2, frame synchronization is performed under the low signal-to-noise ratio(SNR), a large frequency offset which can be up to 20% of a symbol transmission rate and unknown modulation schemes ranging from QPSK to 32-APSK. In this environment, we propose a method combining differential correlation based on SOF and PLSC with an accumulated correlation method for the detection of frame structures. In addition, detection performances about mean acquisition time(MAT) and detection error probability are evaluated via computer simulations.
프레임 동기화는 전송 프레임 헤더에 주기적으로 삽입되는 프리엠블(preamble) 패턴과 수신 심볼 간의 상관 연산을 통해 이루어지며 프레임의 시작점 및 구조 검출을 하는 것이 목적이다. 본 논문은 위성 기반 DVB-S2 시스템 요구사항에 부합하는 프레임 구조 획득 방법에 대해 기술하였다. DVB-S2 수신 신호는 매우 낮은 신호 대 잡음비를 가지며 심볼 속도 대비 20%에 상응하는 주파수 오프셋 성분이 포함되어 있다. 또한 규격은 프레임 당 심볼 수가 상이한 16가지의 프레임 구조를 지원하고 있다. 본 논문에서는 위의 환경에서 정확하고 빠른 프레임 동기화를 위해 프레임 헤더의 SOF와 PLSC 정보를 이용하여 상관 열을 발생시키고 상관 값 누적을 통해 프레임 동기 및 구조 검출을 실시하였다 마지막으로 컴퓨터 모의실험을 통해 평균 획득 시간(mean acquisition time), 프레임 구조 검출 오류율에 대한 성능평가를 실시하였다.