• 한국가스학회지
• /
• 제16권5호
• /
• pp.21-27
• /
• 2012

대학 실험실이나 연구시설에서 실험실 사고에 의해 인적 및 물적 손실이 꾸준히 발생되고 있어서 실험실 사고예방의 필요성이 제기되고 있다. 실험실 사고예방을 위해 무엇보다 중요한 것은 사고의 체계적인 분석이다. 국내에서 산업재해에 관한 분석 연구는 수행되어 왔으나, 실험실 사고 분석에 관한 연구는 수행되지 않았다. 본 연구에서는 실험실 사고예방 대책 수립을 위해 설문지를 개발하였고, 설문지는 대학과 연구기관에 전자우편이나 방문조사로 사고사례를 수집하였다. 사고사례 데이터는 계절별, 사고 분류형태, 발생형태, 기인물 및 상해종류 별로 분석 고찰하였다. 이 연구결과는 실험실 종사자의 안전 확보와 사고예방을 위한 기초자료로 활용하고자 하였다.

• Safety and Health at Work
• /
• 제2권1호
• /
• pp.52-56
• /
• 2011

Objectives: The occupational accident rate was officially reported to be 0.77 per 100 workers in 2001 and 0.70 in 2009. The stagnant decrease in accident rate raises a question about the effectiveness of prevention activity because there have been active prevention efforts in the past 10 years. It is also necessary to know the exact status of occupational injuries to direct a prevention strategy. Methods: The author re-analyzed occupational injury statistics to find the reason for stagnant decreases in occupational injuries. Compensated occupational injuries cases were used to calculate fatal and non-fatal injury rates. Injuries from commuting accidents and sports activities were excluded as well as occupational diseases. The number of workers was adjusted to that of full time equivalent employees. Results: The fatal injury rate excluding injuries associated with commuting accidents, sports activities, and occupational diseases decreased from 12.59 in 2001 to 8.20 in 2009. In 2007, 67.5% of accidents that involved being caught in objects, which are mostly caused by machines and equipment, occurred in the manufacturing industry; this type of incident has decreased since 2001. The fatal and non-fatal injury rates in the manufacturing industry have continuously decreased while the rates in the service industry have not changed from 2001 to 2009. Non-fatal injuries might not be reported in many cases. The number of insured workers was underestimated as long working hours were not adjusted for in the reporting system. Conclusion: The occupational fatal injury rate has decreased and the non-fatal injury rate might have decreased during the last 10 years, although the statistics show stagnancy. The decrease of the injury rate was countervailed by various factors. Hence, the current accident rate does not reflect the actual situation of accidents in Korea. Korea needs to develop an improved system to more accurately calculate occupational fatal and non-fatal injury rates.

• 한국정보통신학회논문지
• /
• 제22권9호
• /
• pp.1159-1164
• /
• 2018

최근 다양한 분야에서 사물 인터넷 활용이 늘고 있다. 특히 갑작스럽게 발생하는 재난재해 분야에서는 지속적 감시가 가능한 사물 인터넷의 역할이 매우 커지고 있으며, 이로 인해 사람들의 삶의 질 또한 크게 향상되고 있다. 따라서 본 연구에서는 밀폐공간의 특성과 환경적 위험성에 대해 살펴보고, 현재 상용화되고 있는 사물 인터넷 기술에 대한 검토가 이루어질 것이다. 밀폐공간에서의 사고는 다른 장소에 비해 매우 높게 나타나며, 사고를 예측하기 매우 어렵다. 이에 최근에는 사물인터넷을 활용한 밀폐공간에서의 사고를 예방하려는 다양한 시도가 나타나고 있다. 특히, 밀폐공간에서 발생할 수 있는 다양한 가스를 센서를 활용하여 탐지하고 이를 실시간으로 근로자에게 전송함으로써 사전에 위험을 감지하여 위험을 최소화할 수 있도록 하고 있다. 본 연구에서는 밀폐공간에서의 사고 예방을 위한 사물인터넷을 활용 사례를 살펴보고 이를 통해 사물인터넷을 활용한 효율적인 재난재해 예방 방안을 제시한다.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.52-60
• /
• 2021

As the prevention of fatal accidents is considered an essential part of social responsibilities, both government and individual have devoted efforts to mitigate the unsafe conditions and behaviors that facilitate accidents. Several studies have analyzed the factors that cause fatal accidents and compared them to those of non-fatal accidents. However, studies on mathematical and systematic analysis techniques for identifying the features of fatal accidents are rare. Recently, various industrial fields have employed machine learning algorithms. This study aimed to apply machine learning algorithms for the classification of fatal and non-fatal accidents based on the features of each accident. These features were obtained by text mining literature on accidents. The classification was performed using four machine learning algorithms, which are widely used in industrial fields, including logistic regression, decision tree, neural network, and support vector machine algorithms. The results revealed that the machine learning algorithms exhibited a high accuracy for the classification of accidents into the two categories. In addition, the importance of comparing similar cases between fatal and non-fatal accidents was discussed. This study presented a method for classifying accidents using machine learning algorithms based on the reports on previous studies on accidents.

• 한국직업건강간호학회지
• /
• 제22권3호
• /
• pp.249-256
• /
• 2013

Purpose: This study was conducted to compare the rates of industrial accidents in workplaces that adopted the 2011 Workplace Health Promotion Subsidy Scheme before and after the implementation. Methods: The study analyzed the raw data of industrial accidents of 304 workplaces which received subsidies for health promotion activities in 2011. The raw data covered the period from February 2010 to July 2012, based on the dates of industrial accidents. Results: Workplaces subsidized for health promotion activities reported fewer occurrences in staff injuries and illnesses than before the subsidization, as the total number of industrial accident victims dropped from 0.35 to 0.24. The rate of industrial accidents also dropped from 0.49 to 0.35, with the number of working days decreased from 35,433 to 23.867, about 33%. Conclusion: The study showed that financial support for health-promoting activities contributed to the decease in industrial accidents, which is an important indication advocating the need for corporate and government investment on workers health promotion programs. Furthermore, this study is also significant as it is the first research conducted in Korea to examine the impact of a workers health promotion project using a direct indicator, the rate of industrial accidents.

• 한국안전학회지
• /
• 제34권6호
• /
• pp.88-95
• /
• 2019

It has been only a few years since drones have been introduced to Korea, and as the use of drones has increased in industrial sites as well as in hobby activities, accidents such as workers' body parts coming into contact with rotating propellers have been occurring since 2016. Industrial accident cases are being filed. In the case of a remote control vehicle, if you release the remote controller in the event of an abnormal situation, it stops in place and no further danger occurs but in case of drones flying over the sky is different. Sudden motor stops during flight, uncontrolled changes in flight posture, loss of radio waves, loose propeller, etc, numerous factors can lead to accidents due to unintentional movements. Therefore, drone operators need safety knowledge as well as high knowledge about drones. However, drones with a weight of less than 12 kg can fly without a pilot's certification, and therefore, a minimum accident prevention measure is required. 10 accidents approved as industrial accidents since 2016, 23 accidents surveyed by general drone operator, 40 accidents surveyed by the Korean Consumer Resources Unfortunately for the purpose of writing this paper, drones are a new species and do not have many parameters for analysis but my experience has shown that the type of disaster does not deviate significantly. In addition, there is no paper that analyzes drone related industrial accidents not only in Korea but also in other countries. However, even if you watch an overseas drone accident video through YouTube, it is not much different from the case that occurs in Korea. I hope that this study will be of little help to all the drone pilots as well as the work safety of industrial drones used in industrial sites.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.811-816
• /
• 2022

Even though continuous management and supervision of reinforcement of policies to safeguard accidents at workplace and work sites were implemented. Accident prevention activities such as inspection and diagnosis are urgently required to induce a preliminary investigation to identify the risk factors for each type of work, before the work task to eliminate risks at the worksites. Since safety inspections at work sites were generally conducted through visual inspections, the results of safety inspections may vary depending on the findings and proficiency of the safety officers. The results of those inspections may have loopholes to prevent potential accidents at work. Therefore, the purpose of this study was to develop a risk identification checklist that can effectively perform safety inspections to prevent accidents at work sites. This study initially analyzed the previously developed accident checklist to identify current complications and issues in safety checklists. Based on the findings of major industrial accidents over the past three years, the relationship between accident, workplace, and work type were analyzed refereeing the safety inspection standards. A risk recognition-checklist was developed to provide basic data on identifying risk factors, and inspection guidance at work sites. To prepare for potential accidents by identifying and taking countermeasures to mitigate the high risk and serious accidents at sites by the guidelines of the checklist. The developed inspection checklist has been practically used by experts at work sites to perform safety inspections, and it has been verified its suitability, and feasibility, to prevent or mitigate workplace accidents, including securing the safety and health of field workers. The role of the developed safety checklist has been considered effective at worksites.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.135-141
• /
• 2015

According to the statistics, occupational fatal injuries by mobile cranes were about 12 per year in whole industrial. Mobile cranes are widely used in various parts of industries to improve the efficiency of the work. However considerable number of fatal injuries happen each year during the operation of the machines. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the mobile crane showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, among the mainly five machines caused the accidents, mobile crane was higher for the second showed 0.6% for number of fatalities compared to number of mobil cranes and for the third showed 11% for number of fatalities compared to number of injuries. Second, main cause of cognitive engineering agenda was visibility, responsibility, affordance. As the measures to prevent accidents before starting operation, alternative revision for the fool proof including visibility, responsibility, affordance etc. for the fool proof measures was proposed. Third, alternative revision as cognitive accident prevention for the fail safe measures was proposed.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.84-87
• /
• 2013

National industrial accidents, most recently occurred in the small to medium-sized industries. These companies' management for the prevention of industrial accidents, the role of the supervisor has emerged as an important issue. Small to medium-sized industries to enhance their effectiveness in the prevention of industrial accidents supervisors of work status survey and direct interviews were conducted. Proposal paper was based on the results of analysis for the role of supervisors by providing safety and health work systematically to participate.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.296-297
• /
• 2018

최근 들어 작업환경에서 사망사고가 증가하면서 안전 문제는 사회적 중요한 이슈로 등장하였다. 기존의 많은 안전관련 정책 및 제도 등을 통해 안전사고를 줄이는 노력을 하고 있음에도 불구하고 사고 예방에는 한계가 있다. IoT 기술을 활용한 사고예방 서비스들이 최근 상용화되고 있으며 이에 대한 효과도 매우 높은 것으로 나타났다. 본 연구에서는 IoT 기술을 활용하여 작업환경에서 사망사고를 줄일 수 있는 최신 사례들을 살펴보고 IoT 기술이 안전분야에서 나아가야할 방향에 대해 살펴보고자 한다.