• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.433-438
• /
• 2008

In Gwangyang port, huge reclaiming work and developing harbor facilities are underway to built industrial complexes. So it is estimated that towing barges will increase and make overtaking, head-on, crossing situations with a lot of cargo vessels in narrow passages. And it is possible to cause severe marine accidents inside of the harbor. This paper has a purpose to produce some policies making navigational safety of towing-barge on Gwangyang Hysco temporary passage. So it is considered how the change of marine traffic capacity and the risk factors in passage navigation influence to towing-barge navigation. And also the questionnaire survey of pilots and VTS operator was conducted to find out what they think about the navigational safety of towing-barge incoming and outgoing in No.1 Yulchon industrial complexes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.46-56
• /
• 2015

The purpose of this study is to find out the effectiveness of drivers' satisfaction over protected and permissive left-turn (PPLT) traffic signal operation. A structural equation model was established for analyzing the effectiveness of various drivers' factors (e.g., personal characteristics, driving attitude, expectation to PPLT, etc.) on the PPLT preference based on questionnaire survey. As a result, the analysis is satisfied with the critical values, such as Q value, RMR, GIF, AGIF, and NFI. The study reveals that PPLT preference increases in case of driver who is male with long social carrier related to transportation affaire and long driving experience without traffic accident involvement. Moreover, PPLT preference increases as the expectation of PPLT to improvement of traffic safety, traffic operation, and traffic environment increases. Therefore, it is recommended that the PPLT should be preferentially operated in urban area of less traffic accidents and the promotion of PPLT be actively conducted for positive effectiveness.

• Korean Journal of Legislative Studies
• /
• v.23 no.1
• /
• pp.151-185
• /
• 2017

Seoul's One Less Nuclear Power Plant is the major urban energy policy launched in April 2012. Its effort to respond to climate change and energy crisis in the aftermath of the Fukushima nuclear accident turned out very successful, considering huge decrease of energy consumption. However, the question of how the cut of energy consumption was possible remains unanswered. This paper introduces the concept of urban governance capacity as the cause of the success. It is the managing and governing capability to maintain the logical consistency policy system, comprising of policy perception, goals, policy tools and evaluation. Without this logical correspondence between the policy factors, any system including energy regime easily falls apart during the systemic transitional period. Governance capacity provides the integrating framework, so that the system as a whole maintains the internal homeostasis.

• Korean Journal of Social Welfare Studies
• /
• v.45 no.2
• /
• pp.123-146
• /
• 2014

This study aims to investigate the employment duration and the probability of quitting the job at first return-to-work of injured workers. This study collected data with structured questionnaires and finally included 515 injured workers. The Kaplan-Meier method is used for describing the employment duration, and the Cox regression is used to identify significant factors on the probability of quitting the job at first return-to-work. The results show that among the all respondents, the 5.65% quitted the job within 1 month, 14.14% within 3 months, 23.7% within 6 months, and 32.81% within 1 years. The Cox regression results show that the probability of quitting the job at first return-to-work is significantly affected by age, marital status, education, employment period when happened the accident, job retention, income change, and classification of diseases. As a result, some implication and policies are suggested for the return-to-work and employment durability of injured workers.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.595-602
• /
• 2009

Great number of ships has been built by Korean Shipyards since early of 2,000 due to the expanding worldwide trade. Most of shipyards have enlarged the weight of erection block and many blocks have been assembled in block fabrication factories outside the shipyards to reduce the shipbuilding period. Especially, Giga blocks that exceed 2,000 tons are often assembled by the block fabrication factories outside the shipyard. Generally, the blocks are transported to building dock in shipyard by towing barges. Accident can be occurred during the sea transportation and it may bring about not only the delay of delivery but also a disaster on the ocean environments. Transportation condition of GPE (Grand Pre-Erection) block differs from the ocean going conditions of marine vessels. Special consideration should be included before transportation work in order to guarantee the safety of GPE blocks and barge carriers. In this paper, several examples, which have been investigated to set up the safety standard of transportation of the GPE blocks on coastal routes, are introduced. For the barge transportation on coastal sea route, the design criteria are discussed, considering the design wave, the acceleration induced by wave, structural strength, and the fixture condition of blocks.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.343-352
• /
• 2018

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessel looks like the barge ship, which is used for many purposes. In these vessels, basically, the power propulsion system is not installed but just towed by a towing vessel such as tugboats with ropes and wires. It means that the motions of towed vessel are basically dependent on the tracking route of towing boat. Therefore, in some cases, undesirable and unpredictable motions may be made by environmental factors such as wave, wind attack and so on. As a result, a collision accident with others may occur during maneuvering situation. Based on these facts, the authors try to encourage the steering performance of the towed vessel by using controllable rudders without any propulsion system. In this study, especially, a controllable vessel with three rudders is considered, and a mathematical model is induced for the future study. The model is described as surge, sway motion and inertia moment by following the general representation method for the surface ship.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.91-99
• /
• 2018

Recently, the spread of ESS in Korea has increased and a fire accident has also occurred. By July 2018, there were a total of 7 cases. All 7 cases were ESS systems consisting of lithium-ion batteries and were burned down. Both the automatic fire extinguisher and the fire department were not able to digest. In this paper, the characteristics of ESS fire are analyzed based on recent ESS fire situation and field investigation, and the cause of fire is divided into environmental, electrical and thermal factors. As a result, it was found that the ESS fire was correlated with the installation environment of the system. In the domestic and overseas lithium ion battery test standard and ESS facility standard survey, the trends and differences of domestic and overseas facilities standards were identified. Based on the fire status and field investigationy, and domestic and overseas facility standard survey, measures were suggested to prevent and prevent the spread of fire in ESS fire.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.611-617
• /
• 2018

This study divided hairpiece-related technologies into three categories: Materials, Structure, Hair Extensions. Then, it investigated the current patent application trends in the above technologies and attempted to determine what aspects should be focused on in terms of the growth potential of hairpiece-related technologies and future technologies. A hairpiece is used to cover a specific balding area resulting from innate factors such as heredity or acquired traits including disease or accident. It is also used to make short hair look longer. Recently, as the rates of hair loss caused by stress increase, there has been a rising demand for hairpieces that can quickly and conveniently cover a balding region as well as satisfy people's aesthetic needs through diverse hairstyling. Even though patents have been applied evenly across hairpiece technology fields, patent activity has declined since 2010 was confirmed. Therefore, this study targets the facilitation and expansion of the hairpiece technology market by suggesting desirable R&D directions for future hairpiece-related technologies after analyzing current hairpiece patent trends.

• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.157-162
• /
• 2019

Recently, the occurrence of unusual heavy snow and cold are increasing due to the unusual global climate change. In particular, the temperature dropped to minus 69 degrees Celsius in the United States on January 8, 2018. In Korea, on February 17, 2014, the auditorium building in Gyeongju Mauna Resort was collapsed due to the heavy snowfall. Because of the tragic accident many studies on the reduction of snow damage is being conducted, but it is difficult to predict the exact damage due to the lack of historical damage data, and uncertainty of meteorological data due to the long distance between the damaged area and the observatory. Therefore, in this study, available data were collected from factors that are thought to be corresponding to snow damage, and the amount of snow damage was estimated categorically using a random forest. At present, the prediction accuracy was not sufficient due to lack of historical damage data and changes of the design code for green houses. However, if accurate weather data are obtained in the affected areas. the accuracy of estimates would increase enough for being used for be the degree preparedness of disaster management.

• Advances in Computational Design
• /
• v.4 no.1
• /
• pp.53-72
• /
• 2019

Safety measures for tower cranes are extremely important among the seismic countermeasures at high-rise building construction sites. In particular, the collapse of a tower crane from a high position is a very serious catastrophe. An example of such an accident due to an earthquake is the case of the Taipei 101 Building (the author was the project director), which occurred on March 31, 2002. Failure of the bolted joints of the tower-crane mast was the direct cause of the collapse. Therefore, it is necessary to design for this eventuality and to take the necessary measures on construction sites. This can only be done by understanding the precise dynamic behavior of mast joints during an earthquake. Consequently, we created a new hybrid-element model (using beam, shell, and solid elements) that not only expressed the detailed behavior of the site joints of a tower-crane mast during an earthquake but also suppressed any increase in the total calculation time and revealed its behavior through computer simulations. Using the proposed structural model and simulation method, effective information for designing safe joints during earthquakes can be provided by considering workability (control of the bolt pretension axial force and other factors) and less construction cost. Notably, this analysis showed that the joint behavior of the initial pretension axial force of a bolt is considerably reduced after the axial force of the bolt exceeds the yield strength. A maximum decrease of 50% in the initial pretension axial force under the El Centro N-S Wave ($v_{max}=100cm/s$) was observed. Furthermore, this method can be applied to analyze the seismic responses of general temporary structures in construction sites.