• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.707-710
• /
• 2011

System safety is defined as the state where the hazard risks due to internal system, interface, operation and maintenance are controlled as acceptable levels. It is represented and evaluated either with the risk level of each risk factor with the consideration of operation environments or with Safety Integrity Level (SIL) which is the system functional safety without considering application environments. The assessment results are issued in forms of certificates and they are reused in many cases. However, the conditions and restrictions for different application environments vary in each case, therefore, additional evaluation on the preconditions of assessment in comparison with the actual application environment must be carried out. For the area of train control, TR 50506-1 has been established based on the IEC 62425 (international standard for safety of train control system by RSSB) and EN 50129 (Europe standard) for the further assessment. In this paper, the analysis on TR 5056-1 has been conducted in depth. The purpose of the study is to determine the requirements for inter-acceptability including scope, procedures, principles, examination and suitability. The results can be utilized for the system safety maintenance when new devices or components are introduced in conventional systems.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.205-212
• /
• 2004

This paper proposes the variables repetitive group sampling plan where the quality characteristic following normal distribution has upper or lower specification limit. The problem is formulated as a non-linear programming problem where the objective function to minimize is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level (AQL) and limiting quality level (LQL) under the operating characteristic curve. Sampling plan tables are constructed for the selection of parameters indexed by AQL and LQL in the cases of known standard deviation and unknown standard deviation. It is shown that the proposed sampling plan significantly reduces the average sample number as compared with the single or the double sampling plan.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.779-783
• /
• 2008

LRFD Resistance factors for static bearing capacity of driven steel pipe piles were calibrated in the freamework of reliability theory. Reliability analysis was performed by the First Order Reliability Method (FORM) using resistance bias factor statistics.The target reliability indices are selected as 2.0 and 2.33 for group pile case and 2.5 for single pile case, based on the reliability level of the current design practice and considering redundancy of pile group, acceptable risk level, construction quality control, and significance of individual structure.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.181-188
• /
• 2021

The use of the internet has become a basic need for many across the globe. The situation is very much the same for the youth in many countries like Saudi Arabia who have grown up surrounded and accessing the internet. This demographic, however, is at an increased risk of falling as victims to cybercrime because of a low level of technical awareness. This review looks at the level of technical awareness of internet use in 3 different countries which include the USA, South Africa, and New Zealand. The review will compare the situation in these nations with those in KSA. Based on the review and comparisons, recommendations are made for culturally and socially acceptable e-Safety awareness of Saudi youths.

• Journal of Korean Public Health Nursing
• /
• v.28 no.3
• /
• pp.495-508
• /
• 2014

Purpose: This study was conducted in order to evaluate the reliability, validity, sensitivity, and specificity of the Short Form of Bobath Memorial Hospital Fall Risk Assessment Scale (BMFRAS-SF). Methods: A validation study was conducted on 207 elderly patients aged over 65 who were admitted to Bobath Memorial Hospital. Fall risk scores of BMFRAS, composed of eight subscales (age, fall history, physical activity, consciousness level, communication, fall risk factors, underlying disease, and medications) were assessed from the electronic medical record. BMFRAS-SF was derived from eight subscales of the BMFRAS representing the significance between fallers and non-fallers (fall history, physical activity, fall risk factors, underlying disease, and medications). Internal consistency reliability and interrater reliability were assessed by Cronbach's alpha and kappa coefficient. Validity was assessed by Spearman correlation analysis, factor analysis. Sensitivity, specificity, positive predictive and negative predictive values, and a receiver-operating characteristic curve (ROC) were generated. Results: Fallers had significantly higher risk scores than non-fallers in fall history, physical activity, fall risk factors, underlying disease, and medication scales. The BMFRAS-SF demonstrated acceptable Cronbach's alpha (.706) and kappa coefficients of .95. The BMFRAS-SF subscales showed good convergent validity and construct validity. The BMFRAS-SF presented good sensitivity(86.7%), specificity(67.9%), positive predictive value(42.9%) and good negative predictive value(94.8%) at a cut-off score of 5. Areas under the ROC curves were .860 for the BMFRAS and .861 for the BMFRAS-SF. Conclusion: The BMFRAS-SF was proved to be reliable and valid. It could be used for time-saving assessment and evaluation of the high risks for falls in clinical practice settings.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.4
• /
• pp.52-61
• /
• 2014

Metal concentrations in the former Janghang smelter area were determined and human health risk of arsenic (As) with bioaccessibility was investigated. Site investigation of the area within 1.5 km from the Janghang smelter showed the As concentrations of 4.8~169.8 mg/kg (avg. 37.8 mg/kg). For 85 samples out of 126 samples, As concentrations were higher than the Worrisome Level of the Korean Soil and Environment Conservation Act, and seven samples exceeded the Countermeasure Standard. Risk assessment for As incorporated with the bioaccessibility revealed that potential human health risk of the carcinogenic ($1.8{\sim}5.0{\times}10^{-5}$) was above the acceptable risk range ($10^{-5}{\sim}10^{-6}$) while the risk of the non-carcinogenic was not found. Remediation goals based on risk incorporated with bioaccessibility of As ranged from 10.8 to 20.0 mg/kg. Such difference in the remediation goals resulted from various bioaccessibility of As (i.e., between 8.7~66.3%) at the study site.

• Safety and Health at Work
• /
• v.11 no.3
• /
• pp.372-377
• /
• 2020

Infection risks of handling specimens associated with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by public health laboratory services teams were assessed to scrutinize the potential hazards arising from the work procedures. Through risk assessments of all work sequences, laboratory equipment, and workplace environments, no aerosol-generating procedures could be identified except the procedures (mixing and transfer steps) inside biological safety cabinets. Appropriate personal protective equipment (PPE) such as surgical masks, protective gowns, face shields/safety goggles, and disposable gloves, together with pertinent safety training, was provided for laboratory work. Proper disinfection and good hand hygiene practices could minimize the probability of SARS-CoV-2 infection at work. All residual risk levels of the potential hazards identified were within the acceptable level. Contamination by gloved hands was considered as a major exposure route for SARS-CoV-2 when compared with eye protection equipment. Competence in proper donning and doffing of PPE accompanied by hand washing techniques was of utmost importance for infection control.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.52-58
• /
• 2018

In reliability based design and assessment (RBDA) methodology, reliability targets are used to ensure that safety levels are met relevant limit states in the stage of design and maintenance. The target reliability for flammable gas pipelines have not been developed yet in Korea. Instead of the reliability targets, the tolerable criteria for risk measures such as societal and individual risk have been applied in pipeline risk management. This paper introduces the procedures to develop the target reliability using tolerable risk criteria for societal and individual risk which can be enforced for high pressure natural gas pipelines in quantitative risk assessment. In addition, we propose the target reliability for natural gas and hydrogen gas transmission pipelines by the procedures.

• Journal of Korea Soil Environment Society
• /
• v.3 no.2
• /
• pp.13-29
• /
• 1998

Recently, It is increasing popularity to research on the soil remediation in aspect of management by reason of the hazardous impact on the contaminated soil in Korea. It was investigated high levels of arsenic salts in soil near abandoned five mines(Darak, Daduk, Jingok, Dalsung, Ilkwang) located in Youngnam area. Arsenic, classified as group A(Human Carcinogens) from IRIS, have shown statistically significant increment in skin cancer with oral exposure. This paper was conducted to predict excess cancer risk value (to the skin cancer) based on multiple pathway such as soil ingestion, dermal uptake and food(plant) ingestion contaminated by arsenic, and also, to identify the remedial goal regarded in future land use. The mine having the highest arsenic level was Daduk(mean : 1950mg/kg) and the next rank was Jingok(1690mg/kg), Ilkwang(352.37mg/kg), Dalsung(86.08mg/kg), Darak(0.83mg/kg). The chronic daily intake to the multiple exposure were calculated using Monte-Carlo simulation regarded in future land use and used q: value was $1.5(mg/kg/day)^{-1}$ to the oral proposed by IRIS(1997). The computated excess cancer risk 95th value to all the mine regarding future land use as residential and rural area were more than $10^{-4}$. If the level of acceptable risk is aimed for 1$\times$$10^{-6}$, it could be used Darak as commercial and industrial area without soil remediation due to the lowest risk value(6$\times$$10^{-8}$ and 3$\times$$10^{-8}$). Computated remedial goal based on 1$\times$$10^{-6}$ of acceptable risk to the future land use as the residential, rural, commercial and industrial area were 0.02mg/kg, 0.003mg/kg, 97.31mg/kg and 194.62mg/kg, respectively.

• The Korean Journal of Pesticide Science
• /
• v.17 no.1
• /
• pp.60-64
• /
• 2013

This study was performed in order to assess the risk of pesticide operator in korean rice paddy. The amount of exposure was calculated based on the informations of 48 kind of items that are used the form of a spraying in korean rice paddy. The risks of these pesticides were assessed to compare the exposure dosage with AOEL (acceptable operator exposure level) which was released form developed countries. When the operator spraying pesticides using motor sprayer, 17 items showed the risk for operator if the operator have not worn the personal protective equipment (PPE), and 6 items showed the risk for operator if the operator have worn the PPE. These result were indicated that the risk of pesticide operator was very high in korean rice paddy.