• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.393-399
• /
• 2011

We evaluate the link-level performance of cooperative multi-hop relaying networks with an maximum distance separable (MDS) code. The effect of the code on the link-level performance at the destination is investigated in terms of the outage probability and the spectral efficiency. Assuming a simple topology, we construct an absorbing Markov chain. Numerical results indicate that significant improvement can be achieved by incorporating an MDS code. MDS codes successfully facilitate recovery of the message block at a relaying node due to powerful error-correcting capability, so that it can reduce the outage probability. Furthermore, we evaluate the average number of hops where the message block can be delivered.

• 한국공간구조학회논문집
• /
• 제7권6호
• /
• pp.53-60
• /
• 2007

스페이스프레임의 볼 조인트 접합부에서는 축부에 핀의 삽입을 위한 구멍이 존재하기 때문에 응력집중으로 인한 취성파단의 우려가 있다. 따라서 접합부에서의 변형능력이나 에너지흡수능력은 낮은 편이다. 본 연구에서는 볼 조인트 접합부의 소성변형능력을 향상시키기고 현장에서 발생할 수 있는 시공오차의 흡수가 가능하도록, 볼트의 나사부나 핀부의 취성파단 없이 감소된 축부에서 소성변형능력이 기대되는 새로운 접합상세를 개발하였으며 수치해석과 실험을 통해 그 성능을 검증하고자 하였다. 수치해석과 실험을 통하여 볼트의 축부 및 핀부의 단면을 조절함으로써 기존 고력볼트보다 소성변형능력이 향상됨을 확인할 수 있었다.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.1-7
• /
• 2007

Based on the eigenfunction expansion method, the wave-absorbing performance of a square or circular pile breakwater was investigated. Flow separation resulting from sudden contraction and expansion is generated and is the main cause of significant energy loss. Therefore, evaluation of an exact energy loss coefficient is critical to enhancing the reliability of the mathematical model. To obtain the energy loss coefficient, 2-dimensional turbulent flow is analyzed using the FLUENT commercial code, and the energy loss coefficient can be obtained from the pressure difference between upstream and downstream. It was found that energy loss coefficient of circular pile is 20% that of a square pile. To validate the fitting equation for the energy loss coefficient, comparison between the analytical results and the experimental results (Kakuno and Liu, 1993) was made for square and circular piles with good agreement. The array of square piles also provides better wave-absorbing efficiency than the circular piles, and the optimal porosity value is near P=0.1.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.20-28
• /
• 2016

In this study, an efficient method of designing laminate composite radar absorbing structures (RAS) is proposed with consideration given to the structural shape so as to improve aircraft stealth performance. The calculation of the radar cross section (RCS) should be decreased to enhance the efficiency of the stochastic optimization when designing an RAS. In the proposed method, RAS are optimized to match up the input impedance of the minimal RCS, which is obtained by using physical optics and the transmission line theory. Single and double layer dielectric RAS for aircraft wings are employed as numerical examples and designed using the proposed method, RCS minimization and reflection coefficient minimization. The availability of the proposed method is assessed by comparing the similarity of the results and computation time with other design methods. According to the results, the proposed method produces the same results as the stochastic optimization, which adopts the RCS as the objective function, and can improve RAS design efficiency by reducing the number of RCS analyses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.33-41
• /
• 2008

Architectural acoustics design of Namsadang exclusive use theaters should be designed to utilize variously to performance space that can fill flavor and taste of Namsadang performance of the Namsadang six yards. Also, analyze special quality that is sound enemy who follow in sound-absorbing materials fare arrangement of innards that is design material of architectural acoustics laying stress on tradition, use purpose and disappointment size that Namsadang exclusive use theaters seeks on the basis of specific space theme that is experience, disappointment form, seat and passageway Wall and ceiling etc. research and sound and meaning of a character wave motion powerful engineering phenomenon and reduction reverberation loss that is happened from indoor manufacturing thing reduction SCALE model of oval structure research and background of AL composition absorbing material of perforate 25% to heighten acoustic absorptivity of practical use internal organs sound absorption material emir quality sound-absorbing materials insert and layer of air most suitable reverberation time of Namsadang exclusive use theaters that 2.2m volume is $42,218\;m^3$ to become 1.2Sec architectural acoustics design do.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.431-444
• /
• 2012

바닥구조의 충격음 차단성능은 바닥의 구성요소에 의해 많은 영향을 받는데, 그중 목조 바닥구조의 경우 중량의 흡읍층과 바닥구조의 강성이 주요한 영향인자로 고려되어 왔다. 본 연구에서는 국내 시공된 목조 건축물에 대해서 현장 실험을 통해 바닥 구성요소가 충격음 차단성능에 미치는 영향에 대해서 살펴보았다. 목조 바닥의 충격음 차단성능은 상대적으로 낮은 저주파수 대역에서의 음압레벨에 의해 전체적인 성능이 좌우되었으며, 흡읍층과 바닥구조의 강성 보강에 의해 저주파수 대역 음압레벨을 감소시켜 충격음 차단성능을 향상시킴을 알 수 있었다. 특히, 바닥난방을 위해 설치되는 시멘트 몰탈층과 같은 충격음 흡수층과 원래 경간의 중간 지점에 보를 설치하여 장선 경간을 줄여줌으로써 목조 바닥의 강성을 증가시킨 경우에 중량 충격음 차단성능이 크게 향상되었다.

• Composites Research
• /
• 제14권6호
• /
• pp.38-46
• /
• 2001

본 연구에서는, 전자파 흡수능을 가진 경사 복합재료 적층판를 설계할 수 있는 최적화 코드를 개발하였다. 또한, 유리 섬유/에폭시 직조 적층판, 알루미늄 첨가물을 함유간 유리섬유/에폭시 직조 적층판과 카본/에폭시 직조 적층판의 유전율을 구하고, 최적화 로드를 이용하여 3층형 전자파 흡수 복합재료 적층판을 개발하였다. 실험에 사용된 복합재료 적층판은 모두 전자기적으로 면내등방성을 가지며 따라서, 동축선과 망분석기를 이용하여 유전율을 측정하였다. 이 로드는 전자기적으로 직교이방성을 가지는 고분자기지 복합재료의 적층각을 포함한 다양한 변수를 고려할 수 있다.

• 소성∙가공
• /
• 제25권2호
• /
• pp.124-129
• /
• 2016

Recently, global railway car makers are competing desperately in developing high-speed railway vehicles. Ensuring passenger safety during a crash is essential. The design and the manufacturing of energy absorbing components are becoming more and more important. A deformation tube is a typical passive energy absorbing component for railway cars. In the current study the slab method was used to predict the energy absorbing capability of a deformation tube during the early design stage. The usefulness of the prediction method is verified through the comparisons between the results of FE simulations and those of the prediction method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.104-108
• /
• 2002

In this study, the dynamic absorbing system for the shoulder-fired system with high-level-impact force has been investigated. for this purpose, firstly, mathematical model based on the short recoil system has been constructed. In order to design the dynamic absorbing system, parameter sensitivity analysis and parameter optimization process have been performed under constraints of moving displacement and transmitted force. In order to enhance the efficiency of energy dissipation, the stroke-dependent variable damping system has been analyzed. finally, the performance of the designed dynamic absorbing system has been evaluated by simulation with respect to the benchmark system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.627-632
• /
• 2002

The paper considers acoustic analysis of the shock absorbing muffler within a rotary compressor. The internal space of the compressor is modelled as a combination of cavities and pipes. A simple one-dimensional impedance approach is used fur the acoustic analysis in the low frequency range, with ignoring the effects of gas flow and temperature gradients that are closely related to power efficiency of the compressor. Using the similarity between the vibration isolator and the shock absorbing muffler, the source strength transmissibility is newly proposed as a performance measure of the muffler and its validity is supported by power analysis. Some Important muffler design rules obtained are; (1) a muffler cavity and its opening throat should be used as a pair, (2) a long thin throat is desirable for high frequency noise isolation, (3) a large muffler cavity should be used with care since it shortens the working frequency range of the muffler. The rules were applied to redesign a compressor muffler currently in use, and a significant improvement was achieved by simply attaching a throat to the outlet holes of the muffler.