• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.83-92
• /
• 2024

A hot-dip simulator was utilized to replicate abnormal coating buildup observed during line stops at galvanize lines, assessing the influence of processing conditions on buildup (up to 14 mm/side). Steel samples from 19 coils (comprising IF, BH, LCAK, HSLA, DP600-DP1180, Si: 0.006 - 0.8 wt%, P: 0.009 - 0.045 wt%) were examined to explore the phenomenon of heavy coating growth. It was discovered that heavy coating buildup (~3 mm/h) and rapid strip dissolution (~0.17 mm/h) in a GA or GI pot can manifest with specific combinations of steel chemistry and processing conditions. The results reveal the formation of a unique coating microstructure, characterized by a blend of bulky Zeta crystals and free Zn pockets/networks due to the "Sandlin" growth mechanism. Key variables contributing to abnormal coating growth include steel Si content, anneal temperature, dew point in heating and soaking furnaces, Zn pot temperature, Zn bath Al%, and cold-rolling reduction%. At ArcelorMittal Dofasco galvanize lines, an automatic online warning system for operators and special scheduling for incoming Si-bearing steels have been implemented, effectively preventing further heavy buildup occurrences.

• 한국재료학회지
• /
• 제14권12호
• /
• pp.829-834
• /
• 2004

Annealing of $Cu(B)/Ti/SiO_2$ in vacuum has been carried out to investigate the effects of Ti underlayer on microstructure in $Cu(B)/Ti/SiO_2$ structures. For comparison, $Cu(B)/Ti/SiO_2$ structures was also annealed in vacuum. Three different temperature dependence of Cu growth can be seen in $Cu(B)/Ti/SiO_2$; B precipitates- pinned grain growth, abnormal grain growth, normal grain growth. The Ti underlayer having a strong affinity for B atoms reacts with the out-diffused B to the Ti surface and forms titanium boride at the Cu-Ti interface. The formation of titanium boride acts as a sink for the out-diffusion of B atoms. The depletion of boron in grain boundaries of Cu films, as results of the rapid diffusion of B along the grain boundaries and the insufficient segregation of B to the grain boundaries, induces grain boundaries to migrate and causes the abnormal grain growth. The increased bulk diffusion coefficient of B within Cu grains can be responsible for the normal grain growth occurring in the annealed $Cu(B)/Ti/SiO_2\;at\;600^{\circ}C$. In contrast, the $Cu/SiO_2$ structures show only the abnormal growth of grains and their sizes increasing as the temperature increases above $400^{\circ}C$.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.104-108
• /
• 2018

Grain-growth behavior in the $95Na_{1/2}Bi_{1/2}TiO_3-5BaTiO_3$ (mole fraction, NBT-5BT) system has been investigated with the addition of $Na_2CO_3$. When $Na_2CO_3$ is added to NBT-5BT, the growth rate is higher than desired and grains are already impinging each other during the initial stage of sintering. The grain size decreases as the sintering temperature increases. With the addition of $Na_2CO_3$, a liquid phase infiltrates the interfaces between grains during sintering. The interface structure can be changed to be more faceted and the interface migration rate can increase due to fast material transport through the liquid phase. As the sintering temperature increases, the impingement of abnormal grains increases because the number of abnormal grains increases. Therefore, the average grain size of abnormal grains can be decreased as the temperature increases. The phenomenon can provide evidence that grain coarsening in NBT-5BT with addition of $Na_2CO_3$ is governed by the growth of facet planes, which would occur via mixed control.

• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.5-12
• /
• 2006

Protein tyrosine kinase(PTK), protein kinase C(PKC), oxidase, as a mediator, take a significant role in signal transduction pathway of angiogenesis. The authors utilized the inhibitors, targeting the formation of three co-enzyme in signal transduction pathway in order to quantify the suppression of abnormal vascular endothelial cell proliferation induced by DMH, to compare the level suppression in each up-regulated growth factors, CTGF, CYR61, $ITG{\beta}1$, FHL2, and to identify the relationship between abnormal cell proliferation and signal transduction pathway. Five groups were established; Control group, Group of DMH, Group of DMH-mixed Herbimycin, inhibitor of protein tyrosine kinase, Group of DMH-mixed Calphostin C, inhibitor of protein kinase C, Group Of Dmh-Mixed 10U Catalase, Inhibitor Of oxidase. The rise of vascular endothelial cell was compared by MTT assay, and four growth factors were analysed with RT-PCR method, at pre-administration, 4, 8, 12, and 24 hours after administration. In comparison of abnormal proliferation of vascular endothelial cell induced by DMH, suppression was noticed in Herbimycin and Calphostin C group, and Calphostin C group revealed higher suppression effect. Nevertheless, Catalase group did not have any suppression. In manifestation of four growth factors, Herbimycin and Calphostin C group presented similar manifestation with control group, except in $ITG{\beta}$. Catalse group had similar manifestation with DMH group in all four growth factors. Abnormal proliferation of vascular endothelial cell induced by DMH have a direct relationship with PTK and PKC, more specifically to PKC. Oxidase was confirmed not to have any relevance.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.891-892
• /
• 2006

To test the correlation between grain shape and growth behavior we prepared WC-TiC-Co samples with rounded (Ti, W)C grains and faceted WC grains. The growth of rounded (Ti, W)C grains was normal. In contrast, the growth of faceted WC grains was abnormal or suppressed depending on the initial size of WC particles. These observations were explained using growth theories of crystals in a liquid and were also confirmed by a simulation using their growth equations. The present results thus demonstrate that the growth behavior of carbide grains in a liquid is governed only by their shape, irrespective of the presence of another phase.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.266-271
• /
• 2004

BaTiO$_3$ 소결체에 국부적으로 SiO$_2$를 첨가하고 열처리하여 비정상 입성장을 유도하였다. 열처리 중에 SiO$_2$가 첨가되지 않은 부분에서는 BaTiO$_3$ 기지상 입자의 성장이 아주 느리게 일어났으나, SiO$_2$가 첨가된 부분에서는 BaTiO$_3$ 기지상 입자가 빠르게 성장하였다. 장시간 열처리 후에는 SiO$_2$가 첨가된 부분에서 비정상 입자가 생성되었고, 열처리 중에 연속적으로 성장하여 2 cm 크기 이상으로 성장하였다. 성장한 비정상 입자내부에는 (111) double twin 또는 single twin 등의 결함이 관찰되지 않아, 국부적으로 첨가된 SiO$_2$에 의하여 생성된 액상에 의하여 비정상 입자와 단결정이 성장하였다. 이러한 결과는 BaTiO$_3$계에서 액상 분포의 불균일으로 비정상 입성장이 유도될 수 있으며, 또한 비정상 입성장을 이용하여 쌍정면 결함을 포함하지 않는 cm크기의 BaTiO$_3$ 단결정을 제조할 수 있음을 보였다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.641-647
• /
• 2011

The present study aims to identify the effect of sintering atmosphere [$O_2$, 75$N_2$-25 $H_2$ (mol%) and $H_2$] on microstructural evolution at the relatively low sintering temperature of 1040$^{\circ}C$. Samples sintered in $O_2$ showed a bimodal microstructure consisting of fine matrix grains and large abnormal grains. Sintering in 75 $N_2$ - 25 $H_2$ (mol %) and $H_2$ caused the extent of abnormal grain growth to increase. These changes in grain growth behaviour are explained by the effect of the change in step free energy with sintering atmosphere on the critical driving force necessary for rapid grain growth. The results show the possibility of fabricating $(K_{0.5}Na_{0.5})NbO_3$ at low temperature with various microstructures via proper control of sintering atmosphere.

• 열처리공학회지
• /
• 제21권6호
• /
• pp.293-299
• /
• 2008

In order to provide with fundamental data of the wrought Mg alloy for press forging, the effect of annealing temperature on the microstructure, texture development and tensile properties is studied in a commercial AZ31B Mg alloy sheet. Basal texture i.e. $(0001){\pm}5^{\circ}$[21$\bar{3}$0] is developed in a commercial AZ31B Mg sheet, and the texture is not changed considerably by annealing over $400^{\circ}C{\times}30min$, while (10$\bar{3}$0) component with high intensity can be observed due to abnormal grain growth. When the sheet is tensile-deformed with RD, $45^{\circ}$ and TD directions at room temperature, fracture strains are given by 25.8, 21.4 and 11.9% in the order of RD, $45^{\circ}$ and TD directions, respectively. With increasing annealing temperature up to $450^{\circ}C{\times}30min$, little change in mean grain size can be revealed by annealing below $300^{\circ}C{\times}30min$ but an abnormal grain growth, where some grains become significantly coarser than the rest, occurs by annealing above $400^{\circ}C{\times}30min$. The maximum tensile strain of around 25% is obtained by annealing below $300^{\circ}C{\times}30min$, but it is abruptly decreased to 16% by annealing above $400^{\circ}C{\times}30min$ owing to intergranular fracture of abnormal grown grains.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.110-117
• /
• 2022

The grain growth behavior in the (1-x)K_0.5Na_0.5NbO₃-xCaZrO₃ (KNNCZ-x) system is studied as a function of the amount of CZ and grain shape. The (1-x)K_0.5Na_0.5NbO₃-xCaZrO₃ (KNNCZ-x) powders are synthesized using a conventional solid-state reaction method. A single orthorhombic phase is observed at x = 0 - 0.03. However, rhombohedral and orthorhombic phases are observed at x = 0.05. The grain growth behavior changes from abnormal grain growth to the suppression of grain growth as the amount of CaZrO₃ (CZ) increases. With increasing CZ content, grains become more faceted, and the step-free energy increases. Therefore, the critical growth driving force increases. The grain size distribution broadens with increasing sintering time in KNNCZ-0.05. As a result, some large grains with a driving force larger than the critical driving force for growth exhibit abnormal grain growth behavior during sintering. Therefore, CZ changes the grain growth behavior and microstructure of KNN. Grain growth at the faceted interface of the KNNCZ system occurs via two-dimensional nucleation and growth.

• Clinical and Experimental Reproductive Medicine
• /
• 제43권2호
• /
• pp.97-101
• /
• 2016

Objective: Growth hormone and its mediator, insulin-like growth factor-1 (IGF-1), have been suggested to exert gonadotropic actions in both humans and animals. The present study was conducted to assess the relationship between serum IGF-1 concentration, seminal plasma concentration, and sperm parameter abnormalities. Methods: A total of 79 men were enrolled in this study from December 2011 to July 2012 and were prospectively analyzed. Patient parameters analyzed included age, body mass index, smoking status, urological history, and fertility history. Patients were divided into four groups based on their semen parameters: normal (A, n=31), abnormal sperm motility (B, n=12), abnormal sperm morphology (C, n=20), and two or more abnormal parameters (D, n=16). Patient seminal plasma and serum IGF-1 concentrations were determined. Results: Patient baseline characteristics were not significantly different between any of the groups. The serum IGF-1 levels in groups B, C, and D were significantly lower than the levels in group A; however, the seminal plasma IGF-1 levels were not significantly different between any of the groups. Conclusion: Men with abnormal sperm parameters had significantly lower levels of serum IGF-1 compared with men with normal sperm parameters. Seminal plasma IGF-1 levels, however, did not differ significantly between the groups investigated here. Further investigations will be required to determine the exact mechanisms by which growth hormone and IGF-1 affect sperm quality.