• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.933-938
• /
• 2007

An experiment was conducted to study the laying performance, shell quality, bone mineralization, hatchability of eggs and performance of progeny (weight at day one and 14 d of age, P content in day old chick, leg score and survivability of chicks) of synthetic broiler breeders fed different levels of non-phytate phosphorus (NPP). Six levels of NPP (1.2, 1.8, 2.4, 3.0, 3.6 and 4.2 g/kg diet) at a constant calcium (Ca) level (30 g/kg) in a maize-soya-deoiled rice bran based diet were tested. Levels of dicalcium phosphate, shell grit and deoiled rice bran were adjusted to achieve the desired levels of NPP and Ca. Each level of NPP was fed with a weighed quantity of feed (160 g/b/d) to 40 female broiler breeders from 25 to 40 weeks of age housed in individual cages. Each bird was considered as a replicate. Egg production, feed/egg mass, body weight, egg weight, shell weight, shell thickness, egg specific gravity, serum Ca content and tibia breaking strength were not influenced (p>0.05) by the variation in dietary NPP levels tested. Increasing the dietary levels of NPP did not influence the hatchability of eggs, phosphorus (P) contents both in egg yolk and day old chick, chick body weight at day one and 14 d of age, leg score and survivability of chicks up to 14 d of age. Maximum response ($p{\leq}0.01$) in shell breaking strength, tibia ash and serum inorganic P contents were observed at NPP levels of 2.09, 2.25 and 3.50 g per kg diet, respectively. The retention of Ca increased, while the P retention decreased ($p{\leq}0.01$) with increasing dietary levels of NPP. Though maximum responses in shell breaking strength, bone ash and serum inorganic P were observed at NPP higher than 1.2 g/kg diet, the broiler breeder performance in terms of egg production, shell quality, hatchability of eggs and progeny performance and their survivability was not influenced by dietary NPP concentrations. It is concluded that synthetic broiler breeders maintained in cages do not require more than 1.2 g NPP/kg diet with a daily intake of 192 mg NPP/b/d during 24 to 40 weeks of age.

• Journal of Nutrition and Health
• /
• v.6 no.3
• /
• pp.37-45
• /
• 1973

The main character of the Korean diet has been found to be low in protein both quantity and quality and high in carbohydrate. The purpose of this survey was to study the amount of salt intake related to the dietary pattern in Korea. The nutrition survey was conducted in a mountainous farming area located in Auhchun-ri, Gaebuk-myon, Changsoo-gun, Chunbuk Province, February 14-19 in 1973 (7 days). The precise weighing method was used in evaluating the kinds of foods and nutrients intake for 24 households during a three day period. The physical examinations were performed by a doctor on 120 persons and a detailed biochemical test on both blood and urine was made on 42 persons over 40 years old. The results obtained are summarized as follows: (1) Average nutrients intake of an adult per day: calorie intake was 2,446 Cal and its components-protein(61.1g) was 10 percent, fat(12.9g) was 5 percent and carbohydrate(521g) contributed 85 percent of the total calories. Other nutrients-calcium (443mg), thiamine(1.09mg), riboflavin (0.90mg), niacin (14.4mg) and vitamin C (63.2mg) were lower than the recommended daily allowance but vitamin A(2,083 I.U.), iron(11mg) and phosphorous(998mg) were slightly higher than that. (2) To evaluate the nutritional deficiences, clinical examinations were conducted. Angular stomatitis was present in 16.7 percent of those examiners. No edema was found. The rate of osteoarthritis, hepatomegaly diseases appeared in 20 percent of the total subjects and the symptoms appeared highest among those Iron 50 to 59 years old. (3) The following chemical components of blood serum were analyzed and found to be within the normal range: glucose, blood urea nitrogen, uric acid, total protein, albumin, globulin, bilirubin, total cholesterol, inorganic phosphate, alkaline phosphatase, sodium, potassium, chloride, calcium and lecithine dehydrase. One case of each of the following were found: hyperglycemia, hypocholesterolemia, renal problem, hypoproteinaemia and diabetes mellitus, and two persons were classified as showing hypoglycemia and hyponaturemia. (4) The sodium content in urine was 199.6 mEq/L, potassium content was 24.6 mEq/L. The sugar, pH and specific gravity in the urine was shown to be normal.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1389-1395
• /
• 2009

Generally, it takes a long time to purify wood vinegar, and it contains toxic compounds such as tar, methanol, phenol and benzopyrene. To reduce the toxicity of wood vinegar itself, we have developed a new purification method of wood vinegar using an oxidation-cohesion reaction and distillation with an active carbon. We have investigated the physico-chemical change (pH, specific gravity, refractive index and dissolved tar), the change of amount of toxic compounds (carbonyl group, phenol, benzopyrene and residual solvents) and organic acids (formic acid (FA), acetic acid (AA), propionic acid (PA)) of the purified wood vinegar under the long term and accelerated storage conditions. Also, we have evaluated the effect of the purified wood vinegar on hair growth using an alopecia model of C57BL/6 mice. As a result, we could find out that the purified wood vinegar was stable and remained without decay under the storage conditions and benzopyrene, a carcinogenic agent, was not detected in the purified wood vinegar. After topical treatment of the purified wood vinegar solution or minoxidil (MXD) for 2 weeks to dorsal skin, the hair regrowth of the mice accelerated faster than that of the control, with no clinical signs. In conclusion, we could suggest a guideline for quality control of process to reduce the toxic compounds in wood vinegar and it might be a useful hair growth promoter in the treatment of baldness or alopecia.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.169-178
• /
• 2016

The properties of wastes for melting need to be considered to minimize the maintenance of refractory and to discharge the molten slags smoothly from a plasma torch melter. When the nonflammable wastes from nuclear facilities such as concrete debris, glass, sand, etc., are melted, they become acid slags with low basicity since the chemical composition has much more acid oxides than basic oxides. A molten slag does not have good characteristics of discharge and is mainly responsible for the refractory erosion due to its low liquidity. In case of a stationary plasma torch melter with a slant tapping port on the wall, a fixed amount of molten slags remains inside of tapping hole as well as the melter inside after tapping out. Nonmetallic slags keep the temperature higher than melting point of metal because metallic slags located on the bottom of melter by specific gravity difference are simultaneously melted when dual mode plasma torch operates in transferred mode. In order to minimize the refractory erosion, the compatible refractories are selected considering the temperature inside the melter and the melting behavior of slags whether to contact or noncontact with molten slags. An acidic refractory shall not be installed in adjacent to a basic refractory for the resistibility against corrosion.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.82-86
• /
• 2006

When a domestically manufactured floater is used in a general gasoline or LPG car, or a flowmeter is floated long time in the engine oil under above $150^{\circ}C$, the floater will be swelled or its organization will be slackened because weight and volume will be changed due to the osmosis of fuel. In this study, we conducted a research on a manufacturing technique of a foam-floater with the small changse in weight and volume, oil-resistance, and thermal resistance in the high temperature engine oil. When the prepared floater TROF II-3, where Nitrile Butadiene Rubber (NBR) as basic material of the floater was superseded by Hydrogenated Nitrile Butadiene Rubber (HNBR), was floated for 100 h at the engine oil of high temperature ($150^{\circ}C$), the change rates of the weight and the volume were 2.90%, and 2.56%, respectively. These were less than the NBR (TROF I-3) case, where the change rates of the weight and the volume were 10.81% and 3.08%, respectively, Therefore, TROF II-3 was determined to be suitable as an engine-oil floater in high temperature because the change of weight and volume were small, the appearance, and the specific gravity of floater were maintained uniformly in the high temperature.

• Safety and Health at Work
• /
• v.8 no.1
• /
• pp.99-104
• /
• 2017

Background: Workers laboring in steel industries in tropical settings with high ambient temperatures are subjected to thermally stressful environments that can create well-known risks of heat-related illnesses and limit workers' productivity. Methods: A cross-sectional study undertaken in a steel industry in a city nicknamed "Steel City" in Southern India assessed thermal stress by wet bulb globe temperature (WBGT) and level of dehydration from urine color and urine specific gravity. A structured questionnaire captured self-reported heat-related health symptoms of workers. Results: Some 90% WBGT measurements were higher than recommended threshold limit values ($27.2-41.7^{\circ}C$) for heavy and moderate workloads and radiational heat from processes were very high in blooming-mill/coke-oven ($67.6^{\circ}C$ globe temperature). Widespread heat-related health concerns were prevalent among workers, including excessive sweating, fatigue, and tiredness reported by 50% workers. Productivity loss was significantly reported high in workers with direct heat exposures compared to those with indirect heat exposures ($x^2=26.1258$, degrees of freedom = 1, p < 0.001). Change in urine color was 7.4 times higher among workers exposed to WBGTs above threshold limit values (TLVs). Conclusion: Preliminary evidence shows that high heat exposures and heavy workload adversely affect the workers' health and reduce their work capacities. Health and productivity risks in developing tropical country work settings can be further aggravated by the predicted temperature rise due to climate change, without appropriate interventions. Apart from industries enhancing welfare facilities and designing control interventions, further physiological studies with a seasonal approach and interventional studies are needed to strengthen evidence for developing comprehensive policies to protect workers employed in high heat industries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1509-1515
• /
• 2010

In this study, sponge cakes were prepared with substitution of 5, 10, 15, and 20% banana powder. The specific gravity and viscosity tended to increase as the ratio of banana powder increased. The foaming stability was highest at the 10% substitution level. The control group had significantly higher moisture content and volume index than the banana powder samples. The crust color values (a, b) decreased significantly with increased content of banana powder, but the a value increased. Crumb colors values (L, b) decreased as banana powder content increased while the a value increased. In terms of textural characteristics, the samples containing 5, 15, and 20% banana powder had significantly higher hardness than the 0 and 10% samples. Fracturability and resilience were maximal with 15% and 5%, respectively. Adhesiveness and chewiness were not significantly different among the samples. In the sensory evaluation, scores for banana flavor, coarseness, color, flavor, softness, and overall acceptability increased as the level of banana powder content increased. Sweetness was not significantly different among the samples. The control group had significantly higher egg-flavor as compared to the samples containing banana powder. The results indicated that substituting 10% banana powder to sponge cake is optimal for quality and provides a product with reasonably high overall acceptability.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.82-87
• /
• 2007

Five dogs with renal failure were referred to the Veterinary Medical Teaching Hospital at Kangwon National University. These dogs had the common history of consumption of Pedigree dry dog food produced in Thailand plant for over 1 month. The dogs showed anorexia, emaciation, vomiting, and polydipsia/polyuria. And in one severely affected dog, bloody diarrhea and hypothermia were seen. The remarkable clinicopathological signs were high value of BUN and creatinine. In some dogs, GGT, phosphorus and lipase were increased. However, no significant changes of complete blood count were found. In urinalysis, hematuria, low specific gravity urine, proteinuria, and calcium oxalate-like crystals were observed. Two severely affected dogs were died. The remained dogs were recovered gradually after change of dog food and supportive therapy. Pathological findings were seen typically in kidneys. Renal atrophy, congestion of the glomerular capillary, and diffuse degeneration, necrosis, dystrophic calcification and regeneration in the tubular epithelium were seen. Yellowish brown fluorolucent laminated materials or particles were quite often found in the lumina of the necrotizing renal tubules of cortex and medulla. Proliferation of fibrous tissue in the interstitium was also seen. By the mycotoxin analysis of the Pedigree dry dog food, ochratoxin A (OTA) and citrinin were detected as much as the concentration of 372.8 ppb and 8.3 ppb, respectively. The final diagnosis of renal failure caused by OTA and citrinin toxicosis was made on the basis of history takings, clinical signs, clinicopathological and pathological findings, and analysis of mycotoxins.

• Earthquakes and Structures
• /
• v.26 no.2
• /
• pp.97-115
• /
• 2024

In this paper, a database consisting of the dynamic shear modulus ratio and damping ratio test data of clay obtained from 406 groups of triaxial tests is constructed with the starting area of Xiong'an New Area as the research background. The aim is to study the nonlinear dynamic properties of clay in this area under cyclic loading. The study found that the effective confining pressure and plasticity index have certain influences on the dynamic shear modulus ratio and damping ratio of clay in this area. Through data analysis, it was found that there was a certain correlation between effective confining pressure and plasticity index and dynamic shear modulus ratio and damping ratio, with fitting degree values greater than 0.1263 for both. However, other physical indices such as the void ratio, natural density, water content and specific gravity have only a small effect on the dynamic shear modulus ratio and the damping ratio, with fitting degree values of less than 0.1 for all of them. This indicates that it is important to consider the influence of effective confining pressure and plasticity index when studying the nonlinear dynamic properties of clays in this area. Based on the above, prediction models for the dynamic shear modulus ratio and damping ratio in this area were constructed separately. The results showed that the model that considered the combined effect of effective confining pressure and plasticity index performed best. The predicted dynamic shear modulus ratio and damping ratio closely matched the actual curves, with approximately 88% of the data falling within ±1.3 times the measured dynamic shear modulus ratio and approximately 85.1% of the data falling within ±1.3 times the measured damping ratio. In contrast, the prediction models that considered only a single influence deviated from the actual values, particularly the model that considered only the plasticity index, which predicted the dynamic shear modulus ratio and the damping ratio within a small distribution range close to the average of the test values. When compared with existing prediction models, it was found that the predicted dynamic shear modulus ratio in this paper was slightly higher, which was due to the overall hardness of the clay in this area, leading to a slightly higher determination of the dynamic shear modulus ratio by the prediction model. Finally, for the dynamic shear modulus ratio and damping ratio of the engineering site in the starting area of Xiong'an New Area, we confirm that the prediction formulas established in this paper have high reliability and provide the applicable range of the prediction model.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.224-238
• /
• 2008

The aim of this study is to confirm the physicochemical property and hazard of thinner (012), which is a diluent of enamel paint used for floor coating for waterproofing and oil painting for the outer wall. The literatures of physicochemical property and hazard of thinner were surveyed and its physicochemical property were evaluated. And then, the inhalation toxicity of thinner affecting the central nervous system and reproductive organs in rats were examined by subchronic (6 h./day. 5 days/ week for 13 weeks) inhalation test. 1) According to the 13-week subchronic inhalation test, there were no significant changes in clinical test and body weight. However, a significant evidence of toxicity was observed in the hematological test and organ weight such as heart, kidney, liver and brain (p<0.01) in the 200 ppm and 1,000 ppm exposure groups in a dose response manner. In the histopathology analysis, there were no significant evidence of toxicity. Therefore, thinner was not classified as an organ targeted toxic agent. In case of Harmfulness, it could be classified as a chronic toxic agent 3($500 ppm/4hr, rat). 2) The reproductive toxicity such as extension of the period of estrous cycle, reduction of serum estradiol concentration and increase of frequency of the abnormal sperm was observed in the 1,000 ppm exposed animals. 3) The result of the physicochemical property of the test material showed that the specific gravity was 0.793, boiling point $155.8^{\circ}C$, steam pressure 2.1 kPa, ignition point $34.5^{\circ}C$, and spontaneous ignition point $280^{\circ}C$. The endothermic and exothermic values were 371.4 J/g and 159.1 J/g. respectively. The explosion limit was 214 mg/l. These data showed that thinner could be classified as an explosion agent level 1.2 and ignitive liquid agent 3 ($23-60^{\circ}C$) according to the notification No. 2008-1 of the Labor Ministry, "Classifying Standard of Chemical Materials."