• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1544-1550
• /
• 2009

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is proposed. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy or compensating voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method that is commonly employed in the direct power conversion. Simulation and experimental results are shown to demonstrate the advantages of the new compensator and PWM strategy. A 220V, 3kVA single-phase compensator based on the digital signal processor controller is built and tested.

• Journal of Marine Life Science
• /
• v.4 no.2
• /
• pp.45-52
• /
• 2019

Polycyclic aromatic hydrocarbons (PAHs) are persistent and commonly detected in marine ecosystem. They coexist with a various contaminants including heavy metals in real environment, but most studies have been still focused on single effects of these contaminants to aquatic organisms. In this study, the single and combined effects of benzy[a]pyrene (B[a]P) and HgCl₂ were investigated in the brackish water flea, Diaphanosoma celebensis. For combined effect study, three mixtures A (3:7), B (5:5), and C (7:3) of benzy[a]pyrene (B[a]P) and HgCl₂ were determined by 48 h - LC₅₀ values of single exposure. Combined effects of both chemicals were estimated by concentration addition (CA) model and independent action (IA) model. As results, 48 h - LC₅₀ values of benzy[a]pyrene (B[a]P) and HgCl₂ was 25.75 ㎍ l^-1 and 3.6 ㎍ l^-1, respectively. TU values of mixture A, B, and C were 1.06, 0.83, and 0.96, respectively, indicating additive effects of mixtures using CA model. This study will be helpful as basic data for understanding the combined effects of contaminants in marine environment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.5-12
• /
• 1998

Exploitation of the papermaking technology to reduce the strength loss that accompanies when using recycled papers as raw materials for papermaking is one of the most important issues imposed upon today's paper industry. Multi-layer sheet forming technology has been suggested as a way that provides some answers to this issue. In this study strength properties of single- and two-layer handsheets formed with recycled fiber and unbleached softwood kraft pulp have been examined to quantify the benefits when using two-layer sheet forming technology rather than a conventional single layer sheet forming precess. Single- and two-layer handsheets were made from 50% of OCC and 50% of Sw-UKP and their strength properties were evaluated. Also the strength properties made from Sw-UKP and OCC sheets were determined. A multihead, which can be attached on the top of hand- sheet former, was used to form two-layer sheets. Maximum strength properties could be obtained in the freeness range of 500∼300mL CSF for Sw-UKP Most of the strength properties was reduced by 30∼35% when 50% OCC was blended with UKP. Decrease of strength properties, however, could be reduced by employing a two-layer sheet forming method. Creator strengths could be obtained when UKP was positioned at the top layer of two layered sheets indicating greater UKP fines retention due to the filtration effect of the OCC layer formed prior to UKP layer contributed the strength improvement. Two-layer sheet showed lower Scott internal bond strength than single layer sheet. By incorporating some of UKP fibers into OCC layer this reduction could be reduced.

• Biomedical Science Letters
• /
• v.26 no.4
• /
• pp.344-350
• /
• 2020

Asthma is a chronic disease and occurs in airway in the lung. The cause of the disease has not been identified, it is assumed that both genetic and environmental risk factors play an important role in the development of asthma. Interleukin (IL)-12 is a cytokine regulating T-cell and NK cell. In this study, we analyzed the genetic polymorphisms of IL-12 receptor genes (IL-12Rβ1 and IL-12Rβ2) in asthma patients and normal individuals in a Korean population. We analyzed single nucleotide polymorphisms (SNPs) in IL-12Rβ1 and IL-12Rβ2 using the genotype data of 193 asthma cases and 3,228 healthy controls from the Korea Association REsource for their correlation with asthma case. IL-12Rβ1 and IL-12Rβ2 genes showed statistically significant polymorphism association with asthma case. As a results, 16 SNPs from IL-12Rβ1 and IL-12Rβ2 genes showed statistically significant association with asthma. Among them, rs375947 SNP in IL-12Rβ1 showed the greatest statistical correlation with asthma (P-value = 0.028, Odds Ratio = 1.27, 95% Confidence Interval = 1.03~1.57). The groups with minor allele of IL-12Rβ1 and IL-12Rβ2 showed increased risk of asthma. The genotype-based mRNA expression analysis showed that the group of minor allele of IL-12Rβ1 showed decreased mRNA expression. Decreased IL-12Rβ1 expression causes decreased IL-12 signaling, and this affects developing asthma. In conclusion, the SNPs in IL-12Rβ1 and IL-12Rβ2 may contribute to development of asthma in a Korean population.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.211-216
• /
• 2001

The components with the circular cross section have the symmetric combination parts for rotating balance and the crack emanates from the symmetric combination parts. The symmetric cracks from symmetric combination parts make a decrease in the component fatigue life more than single crack. In this study, to estimate the behavior of symmetric cracks, the fatigue test was performed using rotary bending tester on the specimen with a symmetric defects in circular cross section. The material used in this study is Ni-Cr-Mo steel alloy. Under the same stress, the result from the rotary bending fatigue test turned out that the symmetric cracks made a decrease in the fatigue life by 35% more than single crack and the relation between log a and cycle ratio $N/N_f$ obtained linearly.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.1
• /
• pp.28-34
• /
• 2023

Endoribonuclease YbeY is specific to the single-stranded RNA of ribosomal RNAs and small RNAs. This enzyme is essential for the maturation and quality control of ribosomal RNA in a wide range of bacteria and for virulence in some pathogenic bacteria. In this study, we determined the crystal structure of YbeY from Staphylococcus aureus at a resolution of 1.9 Å in the presence of zinc chloride. The structure showed a zinc ion at the active site and two molecules of tricarboxylic acid citrate, which were also derived from the crystallization conditions. Our structure showed the zinc ionbound local environment at the molecular level for the first time. Molecular comparisons were performed between the carboxylic moieties of citrate and the phosphate moiety of the RNA backbone, and a model of YbeY in complex with a single strand of RNA was subsequently constructed. Our findings provide molecular insights into how the YbeY enzyme recognizes singlestranded RNA in bacteria.

• Journal of Families and Better Life
• /
• v.29 no.5
• /
• pp.121-140
• /
• 2011

The purpose of this study is to understand how the economic conditions and needs of single-parent families are different between single-mother and single-father families, and also how they are dependent on household composition. The data for this study were drawn from the 1st Korea Welfare Panel Study and analyzed by frequencies, means, ${\chi}^2$, t-test, F-test, and logistic regression with the STATA 9.1 program. The major findings are as follows: (1) Single-parent families are more likely to live in a three-generation household than married couple families. (2) The composition of a three-generation household of single-parent families is affected by sex, age, education, type of marital disruption, the type of employment of single parents and the age of the last-born child. (3) The income-to-needs ratio is not significantly different depending on the sex of the single parents and their household composition. However, material hardship is significantly low in three-generation household single-parent families. (4) There are differences between three-generation single-parent families and independent single-parent families in income sources: The ratio of public transfer to total incomes is higher in three-generation households than independent households, while the ratio of private transfer to total incomes is higher in independent households.

• The Korean Journal of Malacology
• /
• v.27 no.4
• /
• pp.387-393
• /
• 2011

The objective of this study was to develop a real-time PCR method for the rapid detection and quantification of the protozoan pathogen Perkinsus olseni using a TaqMan probe. For the standard, genomic DNA was extracted from $10^5$ in vitro-cultured P. olseni trophozoites, and then 10-fold serial dilutions to the level of a single cell were prepared. To test the reliability of the technique, triplicates of genomic DNA were extracted from $5{\times}10^4$ cells and 10-fold serial dilutions to the level of 5 cells were prepared. The standards and samples were analyzed in duplicate using an $Exicycler^{TM}$ 96 real-time quantitative thermal block. For quantification, the threshold cycle ($C_T$) values of samples were compared with those obtained from standard dilutions. There was a strong linear relationship between the $C_T$ value and the log concentration of cells in the standard ($r^2$ = 0.996). Detection of DNA at a concentration as low as the equivalent of a single cell showed that the assay was sensitive enough to detect a single cell of P. olseni. The estimated number of P. olseni cells was similar to the original cell concentrations, indicating the reliability of P. olseni quantification by real-time PCR. Accordingly, the designed primers and probe may be used for the rapid detection and quantification of P. olseni from clam tissue, environmental water, and sediment samples.

• Molecules and Cells
• /
• v.46 no.10
• /
• pp.611-626
• /
• 2023

Acute myeloid leukemia (AML) is a heterogeneous disease caused by distinctive mutations in individual patients; therefore, each patient may display different cell-type compositions. Although most patients with AML achieve complete remission (CR) through intensive chemotherapy, the likelihood of relapse remains high. Several studies have attempted to characterize the genetic and cellular heterogeneity of AML; however, our understanding of the cellular heterogeneity of AML remains limited. In this study, we performed single-cell RNA sequencing (scRNAseq) of bone marrow-derived mononuclear cells obtained from same patients at different AML stages (diagnosis, CR, and relapse). We found that hematopoietic stem cells (HSCs) at diagnosis were abnormal compared to normal HSCs. By improving the detection of the DNMT3A R882 mutation with targeted scRNAseq, we identified that DNMT3A-mutant cells that mainly remained were granulocyte-monocyte progenitors (GMPs) or lymphoid-primed multipotential progenitors (LMPPs) from CR to relapse and that DNMT3A-mutant cells have gene signatures related to AML and leukemic cells. Copy number variation analysis at the single-cell level indicated that the cell type that possesses DNMT3A mutations is an important factor in AML relapse and that GMP and LMPP cells can affect relapse in patients with AML. This study advances our understanding of the role of DNMT3A in AML relapse and our approach can be applied to predict treatment outcomes.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.19-27
• /
• 1995

Face milling is required to study cutting process with a view of multipoint cutter. This experimental study mainly deals with the single and multi-insert cutting characteristics using coated tool. Because metal cutting of the single and multi-insert has a large relation to the improvement of productivity, the economic cutting process can be achieved by the analysis of proper metal cutting mechanism. Therefore, machining characteristics of face molling in this paper has been studied by investigating the role of different insert number which is concerned with mean cutting force, the RMS values of AE(acoustic emission) signal, tool life and surface roughness in milling SS 41 and SUS 304. The cutting force and AE signal are monitored to make an analysis of cutting process. The surface roughness of the specimens machined by inserts of different numbers is measured at different speeds, feeds and depth of cut. The width of flank wear is also observed.