• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.32-32
• /
• 2000

We present CReMeS, a CORBA-compliant design and implementation of a new real-time communication service. It provide for of a new real-time communication service. It provide for efficient, predictable, and scalable communication between information producers and consumers. Experimental results demonstrate that CReMeS can achieve better performance, predictability and scalability than a Real-Time implementaion of the CORBA Event Service.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1139-1146
• /
• 2009

Collapse of cut slope includes many uncertainties in view of the reason and time. So, in the past, risky cut slopes have been dealt after they've been collapsed through post-management measures. But recently, advanced disaster prevention system is required, and as a part of that RTMS(Real-Time Monitoring System) was developed. In this study, stability of risky cut slope was evaluated by site investigation. To grasp deformation behavior characteristics of slope, numerical analysis based on FEM was performed and using results of that, specific standards for installation of Real-Time Monitoring System were suggested.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.37-44
• /
• 2015

In this paper, we propose the assistance method to enable safe driving through analysis of dangerous driving behavior using real-time alarm by vehicle speed, azimuth data and smartphone. For this method, smartphone is receiving driving data from digital tachograph using communication. Safe driving habit is a very important issue to commercial vehicle because that driver's long time driving than other vehicle type driver. Existing methods are very inefficient to improve immediately dangerous driving habits during driving because proceed driving behavior analysis after the vehicle operation. We propose the new safe driving assistance method that can prevent traffic accidents by real-time and improve the driver's wrong driving habits through real-time dangerous driving behavior analysis and notification the result to the driver. We have confirmed that the method in this paper will help to improve driving habits and can be applied through the proposed method implementation and simulation experiment.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.233-239
• /
• 2015

This paper describes a method that is integrated trace for real-time virtualization environment. This method has solved the problem that the performance trace may not be able to analyze integrated method between heterogeneous operating systems which is consists of real-time operating systems and general-purpose operating system. In order to solve this problem, we have attempted to reuse the performance analysis function in general-purpose operating system, thereby real-time operating systems can be analyzed along with general-operating system. Furthermore, we have implemented a prototype based on ARM Cortex-A15 dual-core processor. By using this integrated trace method, real-time system developers can be improved productivity and reliability of results on real-time virtualization environment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.5
• /
• pp.423-431
• /
• 2000

In this paper, the effect of computing time-delay in the real-time digital fuzzy control systems is investigated and the design methodology of a real-time digital fuzzy controller(DFC) to overcome the problems caused by it is presented. We propose the fuzzy feedback controller whose output is delayed with unit sampling period. The analysis and the design problem considering computing time-delay is very easy because the proposed controller is syncronized with the sampling time. The stabilization problem of the digital fuzzy control system is solved by the linear matrix inequality(LMI) theory. Convex optimization techniques are utilized to find the stable feedback gains and a common positive definite matrix P for the designed fuzzy control system Furthermore, we develop a real-time fuzzy control system for backing up a computer-simulated truck-trailer with the consideration of the computing time-delay. By using the proposed method, we design a DFC which guarantees the stability of the real time digital fuzzy control system in the presence of computing time-delay.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.8
• /
• pp.1453-1458
• /
• 2008

For quantitative PCR assay of Salmonella enterica serovar Typhimurium in food samples, a real-time PCR method was developed, based on DNA genome equivalent. Specific primers and probe designed based on the STM4497 gene of S. Typhimurium LT2 showed the specificity to S. Typhimurium. Threshold cycle (Ct) values of real-time PCR were obtained from a quantitative standard curve with genomic DNA of Salmonella Typhimurium. In addition, the recovery of S. Typhimurium inoculated artificially to chicken samples with $4.5{\times}10^5$ to 4.5 CFU/ml was evaluated by using real-time PCR and plate-count methods. Result showed that the number of cells calculated from the real-time PCR method had good correlation with that of the plate-count method. This real-time PCR method could be applicable to the detection and quantification of S. Typhimurium in food samples.

• Journal of fish pathology
• /
• v.31 no.2
• /
• pp.101-107
• /
• 2018

Quantitative analysis of a myxosporean parasite, Parvicapsula sp. in internal organs (kidney, intestine, spleen, brain and liver) from non-emaciated (farm-A) or emaciated (farm-B and farm-C) olive flounder Paralichthys olivaceus were performed by real-time PCR. The highest DNA copy number ($1.7{\times}10^7copies/mg$ tissue) was detected in kidney of the emaciated olive flounder from farm-C, while the DNA copy number was below detection limit in all the organs of the olive flounder from farm-B. There was not positive result in all of organs from olive flounder in farm-A. PCR and histopathological analysis were also performed using the same specimen and showed same results as those by real-time PCR.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.511-519
• /
• 2019

Objectives: The standard method for the enumeration of environmental Legionella is culturing, which has several disadvantages, including long incubation and poor sensitivity. The purpose of this study is to demonstrate the usefulness of real-time PCR and to improve the standard method. Methods: In 200 environmental water samples, a real-time PCR and culture were conducted to detect and quantify Legionella. Using with the results of the survey, we compared the real-time PCR with the culture. Results: Each real-time PCR assay had 100% specificity and excellent sensitivity (5 GU/reaction). In the culture, 36 samples were positive and 164 samples were negative. Based on the results of the culture, real-time PCR showed a high negative predictive value of 99%, 35 samples were true positive, 105 samples were true negative, 59 samples were false positive and one sample was a false negative. Quantitative analysis of the two methods indicated a weak linear correlation ($r^2=0.29$, $r^2=0.61$, respectively). Conclusions: Although it is difficult to directly apply quantitative analysis results of real-time PCR in the enumeration of environmental Legionella, it can be used as a complementary means of culturing to rapidly screen negative samples and to improve the accuracy of diagnosis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4429-4445
• /
• 2019

As low-power and low-rate WSNs are being widely used for industrial applications, the scheduling of such applications becomes a critical issue to guarantee meeting the stringent requirements of determinism and tight latencies. This paper studies the link scheduling problem for real-time industrial applications in time-slotted channel hopping (TSCH) networks. We propose a heuristic algorithm for centralized link scheduling referred to as path-collision aware least laxity first (PC-LLF) algorithm, which dynamically prioritizes the packets based on the laxity time to the end-to-end deadlines and the amount of collisions that messages might deal with along their designated paths to the destination device. We propose schedulability analysis of real-time applications scheduled under our prioritization approach over TSCH networks, based on the literature on real-time schedulability analysis of multiprocessors and distributed systems. We show that our methodology provides an improved schedulability condition with respect to the existing approaches. Performance evaluation studies quantify to quantify the performance of our proposed approach under a variety of scenarios.

• Journal of Information Processing Systems
• /
• v.12 no.4
• /
• pp.644-660
• /
• 2016

The real-time detection of malware remains an open issue, since most of the existing approaches for malware categorization focus on improving the accuracy rather than the detection time. Therefore, finding a proper balance between these two characteristics is very important, especially for such sensitive systems. In this paper, we present a fast portable executable (PE) malware detection system, which is based on the analysis of the set of Application Programming Interfaces (APIs) called by a program and some technical PE features (TPFs). We used an efficient feature selection method, which first selects the most relevant APIs and TPFs using the chi-square ($KHI^2$) measure, and then the Phi (${\varphi}$) coefficient was used to classify the features in different subsets, based on their relevance. We evaluated our method using different classifiers trained on different combinations of feature subsets. We obtained very satisfying results with more than 98% accuracy. Our system is adequate for real-time detection since it is able to categorize a file (Malware or Benign) in 0.09 seconds.